• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.41-53
• /
• 2019

As a central part in smart construction, BIM has been rapidly spread in construction industry at large. However, the level of applying BIM in construction stage is still relatively lower than that in design stage due to unclear application method, inadequate design BIM model, technical faults of BIM itself, etc. Under these circumstances, public owners inevitably need to adjust the scope and pace in BIM application considering their internal support and capabilities of contractors. This study aims to suggest major BIM-applicable tasks during construction stage in the process of establishing gradual long-term and short-term introduction strategy for public apartment housing projects. Those major tasks were identified with the combination of the importance of tasks and the future benefits of BIM using IPA method. To do so, the degrees of contribution to achieving objectives in construction, current task execution, and communication requirement were investigated by internal site managers. On the other hand, the expected benefits and current level of using BIM were assessed by BIM experts. Among operational tasks by phases, design review, construction plan review, making as-built drawing, etc. were categorized as major tasks. In addition, progress control, regular meeting, master schedule development, work inspection, on-site quality check, etc. were also drawn as major tasks by management areas. The results of this study will provide the useful reference for owners concerned about the introduction of new technologies.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.191-192
• /
• 2012

The BIM(Building Information Modeling) introduction of the construction and maintenance at the design phase through the life cycle of the building until it is destroyed, I will bring big changes in the process. If you are building a small action by a variety of variables difficult to manage on-site construction, but, BIM remodeling of the building by applying a small improvement in the quality of imported building and construction delays, such as design changes or re-construction by removing the elements of economic 04 to make. Since the early stages of applying BIM to complement the introduction part, but the future seems to lead to changes in the built environment, academics and practitioners of the construction industry seem to have an active research.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.21-22
• /
• 2023

In reinforced concrete constructions, reinforcing bar generates more CO₂ per unit weight than other construction materials. In particular, cutting and bending rebar is the main source of rebar waste in the construction industry. Rebar-cutting waste is inevitable during the construction of a reinforced concrete structure since the rebar is not manufactured as designed. Large amounts of waste can be avoided by utilizing optimal cutting patterns and schedules. This research provides a fundamental analysis of the automatic calculation of column rebar length using BIM-based shape codes to minimize cutting waste to near zero. By employing this approach in practice, it is possible to minimize the rate of rebar-cutting waste, reduce costs, shorten construction duration, and reduce CO₂ emissions. In addition, the development of this research will serve as a clue for the development of BIM-based rebar layout automation algorithms.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.57-62
• /
• 2010

To effectively use Building Information Modelling (BIM) dealing with semantic information including the entities of building components, the information about building components should be standardized. Like standardized modern buildings. in the past, Korean traditional houses were built according to strict procedures and formats. Therefore, if the Korean traditional house are modelled by using BIM,. not only the Korean traditional house of good quality will be built quickly and cheaply, but also spaces in the existing Korean traditional house will be easily analyzed. However, when analyzing spaces of the Korean traditional house using Space Syntax, some problems are caused in dividing outdoor space such as yard with unclear boundaries, unlike indoor space with clear boundaries surrounded by walls. These comes from the fact that researchers have subjectively divided a space in the house into convex spaces as units for Space Syntax analysis. Therefore, this study aims to develop an objective and rational spatial subdivision technique for Space Syntax analysis of a Korean traditional house modelled by using BIM. We could objectively and reasonably divide a Korean traditional house space into convex spaces by recognizing the building components in the house modelled in the form of Industry Foundation Classes(IFC). Depending on the connection of convex spaces allocated in the spatial subdivision technique, j-graph in Space Syntax could be drawn and the measurements of spatial configurations could be determinded. Through the developed technique, the social properties including the cultural and philosophical aspects of Korean people was identified by measuring the spatial configurations of Korean traditional house. The developed technique will serve as useful means to help architects to find an appropriate purpose of each space for sustainable architecture on the basis of the spatial and social relationships in buildings or urban systems.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.291-300
• /
• 2020

Newly graduated students are shown to constitute an important source of innovation within the architectural, engineering and construction (AEC) industry. In relation to digital technologies like BIM (Building Information Modelling) that is claimed to have a potential to transform the industry, newly graduated students may play a vital role in innovating with BIM. The paper aims to explore determinants for students perceived potential of BIM use (PPBU) and the role of the educational background. The aim will be achieved by analysing the results from a survey conducted among third- and fourth-year students in construction and civil engineering in Hong Kong, Sweden, and Thailand (n = 194). When the different groups are compared Swedish and Thai students perceive a significant higher PPBU than Hong Kong students. In a step-wise multiple regression analysis five predictors for PPBU were identified for Thai respectively Swedish students, and one predictor was identified for Hong Kong students. It is concluded that in the contemporary BIM-discourse it is claimed that BIM can/should transform the industry, and BIM is even seen as a disruptive technology, and newly graduated students will contribute to (digitally driven) innovation. However, from the predictors of PPBU, the question can raised if the awareness of the need for structural changes is lacking in the education, if students later in their working life should contribute to a BIM-induced transformation of the industry?

• 토지주택연구
• /
• 제10권2호
• /
• pp.59-67
• /
• 2019

The recent paradigm shift in the construction industry has led to a growing demand for industrial construction. In particular, interest in modular housing, one of the areas of industrialization architecture, is soaring. Modular housing is a construction method for completing a building by transporting factory-built modules to the site and assembling them. However, modular housing in Korea has various problems such as errors in design books, lack of factory drawings, and lack of on-site construction plans. BIM is a tool for accumulating, producing and managing various information through 3D models and is a solution to solve various problems of modular housing. In this study, problems of modular housing and BIM utilization of modular housing were presented as ways to ensure the quality of modular housing. Therefore, this study analyzed the problems that are occurring in the construction process of modular housing. And, to address the problem of modular housing, BIM utilization measures were proposed for each modular process step. However, the application of BIM in domestic modular project is currently being carried out in pilot research project. Because of this, the BIM utilize method for modular housing is limited based on the BIM use for general projects and the examples for some modular pilot projects.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1058-1067
• /
• 2015

Dweller's safety is one of the most important factors for the evaluation of building performance. The process of conventional safety design which is normally performed by the codes and designer's experiences is not enough to check the whole possibilities of unexpected accidents in the built environment. It means that the dwellers might be always exposed by the dangerous situation which should have been removed in the architectural design process. In order to solve this problem, this study intends to introduce a rule-based performance evaluation technology based on BIM(Building Information Modeling). The proposed technology focuses on the real time evaluation of dweller's safety in the ordinary life in the designed building alternatives and uses a commercial BIM tool as a design and evaluation platform.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.21-22
• /
• 2015

Productivity has been a wide-ranging challenge for the construction industry, both in Australia and globally. Particularly in Western Australia's construction and resources sectors, continuously low productivity will potentially discourage future investments. The emergence of the global marketplace necessitates that the supply chain needs to focus on the concept of the holistic efficiency. The isolated geographical position of Australia only exacerbates this phenomenon. In recent years, Building Information Modelling (BIM) has been suggested as an efficient way to help productivity improve and information management throughout supply chains. This keynote talk will focus on discussing ways of implementing BIM to enhance site productivity focusing on Western Australia's construction projects. It will show new trends of its applications to accomplish an innovative way in construction project management. The talk will also give an insightful summary of integrated methods with state-of-the-art technologies backboned by the BIM cases from construction and oil and gas industry projects.

• 한국건설관리학회논문집
• /
• 제17권2호
• /
• pp.31-38
• /
• 2016

건설사업비 중 건축물의 유지관리비용이 차지하는 비중이 초기투자비만큼이나 상당하며 국내의 경우 건설공사의 생애주기비용(LCC)관점에서 설계VE검토 업무를 시행하고 있다. 건설산업의 정보화와 고도화 급속히 진행됨에 따라 BIM에 대한 관심이 고조되고 있다. 2012년부터 조달청은 500억원 이상인 공공공사에 BIM적용을 의무화를 시작으로 2016년부터 조달청이 발주하는 모든 공공공사에 BIM적용이 의무화된다. 건축설계의 패러다임이 2D방식에서 3D, 데이터관리 관점의 BIM으로의 전환이 정책적으로 이루어지고 있는 환경에서, LCC측면에서의 BIM활용에 대한 연구는 미흡한 실정이다. 특히, LCC분석 요소 중 하나인 수선교체비 산정을 위한 BIM 소프트웨어는 부재하며 상용화된 BIM저작도구에서 수선교체비 산정을 위한 정보의 전달이 부족하다. 따라서 본 연구에서는 데이터 표준 포맷인 IFC기반 수선교체비 산정을 위한 프로세스를 제안한다. 먼저, 현재 존재하는 수선교체 기준을 분석하고 BIM기반 수선교체비 산정 요구정보를 정의한다. 정의된 요구정보는 각 정보에 해당하는 IFC를 통해 추출되고, BIM기반 수선교체비 산정 요구정보 DB에 저장된다. 이는 외부 DB인 수선교체기준DB와 단가DB와 연계하여 수선교체비를 산정한다. 본 연구가 제시하는 프로세스를 통해 BIM환경에 대응하여 BIM모델을 활용한 수선교체비 산정의 효율화를 기대하며 수선교체비 뿐만 아니라 초기공사비, 에너지비용, 유지관리비용에 이르기까지 향후 LCC분석 요소에 확장하여 적용이 가능할 것이며 BIM기반 LCC분석의 표준화에 기여할 수 있다.