• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.11-18
• /
• 2021

(1-x)BaWO₄-xBaV₂O₆(x=0.54~0.85) 조성의 새로운 초저온 동시 소성 세라믹(ULTCC)용 마이크로파 유전체 복합 재료를 BaWO₄와 BaV₂O₆의 혼합물을 소성하여 제조되었다. 수축 시험은 세라믹 복합재가 BaV₂O₆의 영향으로 500℃의 낮은 온도에서 치밀화가 시작되며, 650℃에서 상대밀도 98%로 소결될 수 있음을 보였다. X-선 회절 분석은 복합체는 BaWO₄와 BaV₂O₆이 공존하고 소결체에서 2차상이 검출되지 않음을 보였다. 이는 두 상이 서로 우수한 화학적 안정성이 있음을 의미하였다. 거의 0에 가까운 공진 주파수 온도계수(𝛕_f)는 복합체에 존재하는 두 상의 𝛕_f 값이 각각 양(+) 및 음(-)의 값임에 따라 두 상의 상대적 함량을 조절하여 얻을 수 있었다. BaV₂O₆의 함량이 x=0.53에서 0.85로 증가함에 따라 복합 재료의 𝛕_f 값은 7.54에서 14.49 ppm/℃로 증가하였고 ε_r은 10.08에서 11.17로 증가했으며 Q×f값은 47,661에서 37,131 GHz로 감소하였다. 최고의 마이크로파 유전 특성은 BaV₂O₆의 함량이 x=0.6 일 때, ε_r=10.4, Q×f=44,090 GHz 및 𝛕_f=-2.38 ppm/℃값을 얻을 수 있었다. 화학적 호환성 실험은 개발된 복합 재료가 동시 소성 과정에서 알루미늄 전극과 반응성이 없음을 보여주었다.

• 한국환경과학회지
• /
• 제31권8호
• /
• pp.677-689
• /
• 2022

In order to photocatalytically treat organic matter (COD_Cr) and chromaticity effectively, chemical coagulation and sedimentation processes were employed as a pretreatment of the leachate produced from landfill in Jeju Island. This was performed using FeCl₃·6H₂O as a coagulant. For the treated leachate, UV/TiO₂ and UV/TiO₂/H₂O₂ systems were investigated, using 4 types of UV lamps, including an ozone lamp (24 W), TiO₂ as a photocatalyst, and/or H₂O₂ as an initiator or inhibitor for photocatalytic degradation. In the chemical coagulation and sedimentation process using FeCl₃·6H₂O, optimum removal was achieved with an initial pH of 6, and a coagulant dosage of 2.0 g/L, culminating in the removal of 40% COD_Cr and 81% chromaticity. For the UV/TiO₂ system utilizing an ozone lamp and 3 g/L of TiO₂, the optimum condition was obtained at pH 5. However, the treated COD_Cr and chromaticity did not meet the emission standards (COD_Cr: 400 mg/L, chromaticity: 200 degrees) in a clean area. However, for a UV/TiO₂/H₂O₂ system using 1.54 g/L of H₂O₂ in addition to the above optimum UV/TiO₂ system, the results were 395 mg/L and 160 degrees, respectively, which were within the emission standard limits. The effect of the UV lamp on the removal of COD_Cr, and chromaticity of the leachate decreased in the order of ozone (24 W) lamp > 254 nm (24 W) lamp > ozone (14 W) lamp > 254 nm (14 W) lamp. Only COD_Cr and chromaticity treated with the ozone (24 W) lamp met the emission standards.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.400-405
• /
• 2023

Tb³⁺-doped CaNb₂O₆ (CaNb₂O₆:Tb³⁺) thin films were deposited on quartz substrates at a growth temperature of 300 ℃ using radio-frequency magnetron sputtering. The deposited thin films were annealed at several annealing temperatures for 20 min and characterized for their structural, morphological, and luminescent properties. The experimental results showed that the annealing temperature had a significant effect on the properties of the CaNb₂O₆:Tb³⁺ thin films. The crystalline structure of the as-grown CaNb₂O₆:Tb³⁺ thin films transformed from amorphous to crystalline after annealing at temperatures greater than or equal to 700 ℃. The emission spectra of the thin films under excitation at 251 nm exhibited a dominant emission band at 546 nm arising from the ⁵D₄→⁷F₅ magnetic dipole transition of Tb³⁺ and three weak emission bands at 489, 586, and 620 nm, respectively. The intensity of the ⁵D₄→⁷F₅ (546 nm) magnetic dipole transition was greater than that of the ⁵D₄→⁷F₆ (489 nm) electrical dipole transition, indicating that the Tb³⁺ ions in the host crystal were located at sites with inversion symmetry. The average transmittance at wavelengths of 370~1,100 nm decreased from 86.8 % at 700 ℃ to 80.5 % at an annealing temperature of 1,000 ℃, and a red shift was observed in the bandgap energy with increasing annealing temperature. These results suggest that the annealing temperature plays a crucial role in developing green light-emitting CaNb₂O₆:Tb³⁺ thin films for application in electroluminescent displays.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.27-32
• /
• 2003

To understand the chemical structure of sewer sludge in comparison with commercial compost and charcoal used as a soil improver, it was carried out to analyse their ash contents and metal ions, and to elucidate the chemical structure of their residuals after a sequential treatment of alcohol-benzene(1:2) extraction in Soxhlet, 3% HCl reflux and 79% H₂SO₄ hydrolysis, using CHNS analyzer and solid C-13 NMR spectrometer. The results obtained were as follows: 1. Ash content of sludge was about 46% that is higher than those of compost (17%) and charcoal (4%). 2. The residual of sludge after a sequential treatment of HCl and H₂SO₄ hydrolyses had high ash content about 23%, too. 3. The sludge seems to be suitable to the soil improver because the content of heavy metal ions in sludge was near the compost and below the organic fertilizer standard. 4. Elemental composition of sludge residual after HCl-H₂SO₄ hydrolyes was C/sub 56/H/sub 91/O/sub 12/N₂S = (C/sub 6/H/sub 10/O/sub 5/)/sub 7/(C/sub 6/H₄)/sub 7/C₂H/sub 43/O₂N₂S, similar to C/sub 103/H/sub 122/O/sub 33/N/sub 6/S = (C/sub 6/H/sub 10/O/sub 5/)/sub 6/(C/sub 6/H₄)/sub 10/C/sub 7/H/sub 22/O₃N/sub 6/S of compost. 5. The sludge residual had proved to have both considerable aliphatic and aromatic groups, but the compost residual to have mainly aliphatic groups and the charcoal to have mainly aromatic groups, through the peak analysis of solid C-13 NMR charts. 6. So, the sewer sludge is proved to have a considerable amount of aromaticity like in woody biomass containing lignin.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.313-319
• /
• 2021

Understanding of effects of changes in the particle size of the matrix material on the mullite whisker growth during the production of porous mullite is crucial for better design of new porous ceramics materials in different applications. Commercially, raw materials such as Al₂O₃/SiO₂ and Al(OH)₃/SiO₂ are used as starting materials, while AlF₃ is added to fabricate porous mullite through reaction sintering process. When Al₂O₃ is used as a starting material, a porous microstructure can be identified, but a more developed needle shaped microstructure is identified in the specimen using Al(OH)₃, which has excellent reactivity. The specimen using Al₂O₃/SiO₂ composite powder does not undergo mulliteization even at 1,400 ℃, but the specimen using the Al(OH)₃/SiO₂ composite powder had already formed complete mullite whiskers from the particle size specimen milled for 3 h at 1,100 ℃. As a result, the change in sintering temperature does not significantly affect formation of microstructures. As the particle size of the matrix materials, Al₂O₃ and Al(OH)₃, decreases, the porosity tends to decrease. In the case of the Al(OH)₃/SiO₂ composite powder, the highest porosity obtained is 75 % when the particle size passes through a milling time of 3 h. The smaller the particle size of Al(OH)₃ is and the more the long/short ratio of the mullite whisker phase decreases, the higher the density becomes.

• 센서학회지
• /
• 제25권6호
• /
• pp.440-446
• /
• 2016

This study introduces the characteristics of current-voltage (I-V) and impedance variance for $ZnO-Zn_2BiVO_6-Co_3O_4$ (ZZCo), which is sintered at $900^{\circ}C$, according to temperature changes. ZZCo varistor demonstrates dramatic improvement of non-linear coefficient, ${\alpha}=66$, with lower leakage current and higher insulating resistivity than those of ZZ ($ZnO-Zn_2BiVO_6$) from the aspect of I-V curves. While both systems are thermally stable up to $125^{\circ}C$, ZZCo represents a higher grain boundary activation energy with 1.05 eV and 0.94 eV of J-E-T and from IS & MS, respectively, than that of ZZ with 0.73 eV and 0.82 eV of J-E-T and from IS & MS, respectively, in the region above $180^{\circ}C$. It could be attributed to the formation of $V^*_o$(0.41~0.47 eV) as dominant defect in two systems, as well as the defect-induced capacitance increase from 781 pF to 1 nF in accordance with increasing temperature. On the other hand, both the grain boundary capacitances of ZZ and ZZCo are shown to decrease to 357 pF and 349 pF, respectively, while the resistances systems decreased exponentially, in accordance with increasing temperature. So, this paper suggests that the application of newly formed liquid phases as sintering additives in both $Zn_2BiVO_6$ and the ZZCo-based varistors would be helpful in developing commercialized devices such as chips, disk-type ZnO varistors in the future.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.587-592
• /
• 2023

CoCl₂·6H₂O 수용액을 결정성셀룰로오스에 함침시켜 건조한 후, 하소, 소성을 통하여 산화코발트(Co₃O₄·CoO) 초미세입자를 합성하였다. 합성된 코발트 산화물 입자의 결정구조 및 표면구조를 주사전자현미경(SEM)과 X-선회절분석(XRD)으로 조사하였다. CoCl₂·6H₂O 수용액을 함침시키는 매개체로 사용한 결정성셀룰로오스(crystalline cellulose)는 470℃ 정도에서 열분해 되었고, Co₃O₄ 결정상은 350℃에서 생성되기 시작하였다. Co₃O₄ 결정상은 500℃까지 유지되었으며, 500℃ 이상의 온도에서는 CoO 결정상으로 변화하는 것을 알 수 있었다. 열처리 온도가 증가함에 따라 산화코발트 입자의 크기가 커지는 현상이 나타났으며, 900℃ 이상의 온도에서는 입자간 용융이 일어나는 것이 관찰되었다. 하소온도 700℃ 이하의 온도에서 입자크기 2-10㎛의 Co₃O₄와 CoO의 초미세입자가 생성되는 것을 확인하였다.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.245-250
• /
• 2019

라디오주파수 분말 스퍼터링 방법으로 sapphire (0001) 기판 위에 Sn을 함유한 β-Ga₂O₃(β-Ga₂O₃ : Sn) 나노와이어를 증착하였다. 후열처리 공정의 가스 분위기가 나노와이어 형상의 변화에 미치는 영향을 연구하였다. 800℃에서 진공 중 열처리 과정에서, as-grown 나노와이어는 다공성 구조로 전이하였다. 비화학양론 Ga₂O_3-x는 화학양론 Ga₂O₃로 바뀌고, Sn원자는 응집하여 나노클러스터를 형성한다. Sn 나노클러스터는 증발하여 Sn 원자의 함량은 1.31에서 0.27 at%로 감소하였다. Sn원자의 증발로 인하여 나노와이어 표면에 다수의 기공이 형성되고, 이는 β-Ga₂O₃ : Sn 나노와이어의 체적대비 표면적 비율을 증가시킨다.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.250-254
• /
• 2023

본 연구에서는 중적외선 영역에서 투과 성능이 우수하며, 높은 굴절률을 갖는 Li₂O-BaO-Ga₂O₃-TeO₂-TiO₂-GeO₂계 유리를 합성하였으며, 각 성분의 함량 변화에 따른 열적, 광학적 특성을 분석하였다. Li₂O-BaO-Ga₂O₃-TeO₂-TiO₂-GeO₂ 계 유리에서, TeO₂의 함량이 증가함에 따라 굴절률이 증가하며 동시에 유리 전이 온도가 낮아짐을 확인하였다. 또한 BaO의 함량이 증가함에 따라 아베수의 감소 없이 굴절률이 증가하였다. IR cut-off 파장은 TeO₂ 및 BaO의 함량이 증가함에 따라 장파장으로 이동하는 것을 확인하였으며 이는 TeO₂ 및 BaO의 큰 몰질량 때문인 것으로 예상된다. Li₂O의 경우, BaO와 치환 형태로 첨가되었으며, 그 함량이 늘어날수록 굴절률의 큰 감소 없이, 유리 전이온도를 감소시킬 수 있는 것으로 확인되었다.