• 한국항공우주학회지
• /
• 제42권3호
• /
• pp.229-236
• /
• 2014

본 논문에서는 유도형 활공 탄약의 유도 법칙 및 제어기에 대해서 연구하였다. 기존의 유도형 탄약은 활공 없이 목표물을 타격하기 위한 유도 단계만 있지만, 유도형 활공 탄약은 사거리 증가를 위한 날개를 장착하고 활공하기 때문에 활공 유도 단계가 추가 되어야 한다. 본 논문에서는 벡터필드를 이용하여 탄약의 진입각을 만족시키기 위한 경로점까지 유도하였고, 종말 유도에서는 목표물 타격을 위해 비례항법유도 기법을 적용하였다. 또한 각 활공 영역별로 운동 모델을 선형화하고 각각에 맞는 제어기를 설계한 후, 선형 보간법을 이용하여 제어기의 이득 값을 계산한 뒤 제어에 사용하였다.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.98-104
• /
• 2016

With the development of modern science and technology, weapon systems such as tanks, submarines, combat planes, radar are also dramatically advanced. Among these weapon systems, the ballistic missile, one of the asymmetric forces, could be considered as a very economical means to attack the core facilities of the other country in order to achieve the strategic goals of the country during the war. Because of the current ballistic missile threat from the North Korea, establishing a missile defense (MD) system becomes one of the major national defense issues. This study focused on the optimization of air defense artillery units' deployment for effective ballistic missile defense. To optimize the deployment of the units, firstly this study examined the possibility of defense, according to the presence of orbital coordinates of ballistic missiles in the limited defense range of air defense artillery units. This constraint on the defense range is originated from the characteristics of anti-ballistic missiles (ABMs) such as PATRIOT. Secondly, this study proposed the optimized mathematical model considering the total covering problem of binary integer programming, as an optimal deployment of air defense artillery units for defending every core defense facility with the least number of such units. Finally, numerical experiments were conducted to show how the suggested approach works. Assuming the current state of the Korean peninsula, the study arbitrarily set ballistic missile bases of the North Korea and core defense facilities of the South Korea. Under these conditions, numerical experiments were executed by utilizing MATLAB R2010a of the MathWorks, Inc.

• 한국시뮬레이션학회논문지
• /
• 제20권3호
• /
• pp.11-18
• /
• 2011

한국 육군은 K-9자주포용 탄약보급 장비로 K-10 탄약운반 장갑차를 운용하고 있으며, K-55 자주포용 탄약운반 장갑차의 전력화를 검토하고 있다. K-55용 탄약운반 장갑차는 현재 시제장비로 개발 된 상태로, 이 장비의 전력화 여부 및 소요대수를 결정하기 위해서는 사전에 이 장비의 운용효과를 분석할 필요가 있다. 이에 본 연구에서는 시뮬레이션을 이용하여 K-55용 탄약 운반장갑차의 운용효과를 제시하였다. 시뮬레이션 모델은 육군의 화포 편성 및 기타 포병무기체계 작전계획 분석 등을 위해 사용되는 워게임 모델인 화력운용분석모델을 활용하였다. 화력운용분석모델 모의결과에 따른 K-55 자주포용 탄약운반차의 운용효과는 탄약운반장갑차의 전력화 여부에 대한 의사 결정에 활용할 수 있을 것이라 판단된다.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.43-52
• /
• 2021

In weapon assignment studies to defend against threats such as ballistic missiles and long range artillery, threat assessment was partially lacking in analysis of various threat attributes, and considering the threat characteristics of warheads, which are difficult to judge in the early flight stages, it is very important to apply more reliable optimal solutions than approximate solution using LP model, Meta heuristics Genetic Algorithm, Tabu search and Particle swarm optimization etc. Our studies suggest Generic Rule based threat evaluation and weapon assignment algorithm in the basis of various attributes of threats. First job of studies analyzes information on Various attributes such as the type of target, Flight trajectory and flight time, range and intercept altitude of the intercept system, etc. Second job of studies propose Rule based threat evaluation and weapon assignment algorithm were applied to obtain a more reliable solution by reflection the importance of the interception system. It analyzes ballistic missiles and long-range artillery was assigned to multiple intercept system by real time threat assessment reflecting various threat information. The results of this study are provided reliable solution for Weapon Assignment problem as well as considered to be applicable to establishing a missile and long range artillery defense system.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.58-65
• /
• 2016

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.5-13
• /
• 2007

The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2008년도 추계학술대회 및 정기총회
• /
• pp.359-363
• /
• 2008

In recent warfare, importance of counter-fire is increased. New weapon system and counter-fire have critical impact on defeating of the enemy. At an initial battle counter-fire, we need to study about striking plan against the enemy mine artillery. In this paper, we studied, using MANA(agent based model), how much cannon's hit probability and UAV-based target acquisition have influence on striking the mine artillery. We constructed MANA model based on the characteristics of a regional database of Korean peninsula. If we develop detail database of the ROK Army, the proposed MANA model can be used as a war-game model for the regimental level of the Army.

• 산업기술연구
• /
• 제35권
• /
• pp.9-13
• /
• 2015

In this paper, a new excitation scheme is developed to increase the output torque of the sensorless BLDC(Brushless DC) motor(BLDCM), which drives fins to control the flight attitude of a guided artillery munition. The proposed scheme is based on a 12-step excitation strategy combining two-phase and three-phase excitations. The proposed 12-step excitation scheme can produce more torque than a typical 6-step scheme for the start-up and synchronous operation in the sensorless BLDCM drive. The simulation and experimental results on the sensorless BLDCM drive system to control the fin were verified the validity of the proposed scheme.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.88-89
• /
• 2013

For the purpose of launching strikes, initial survivability of self-propelled artilleries is of crucial importance despite the fact that they are mobility weapon systems. This study identifies the combat placement possibility of the reinforced concrete box-type artillery positions, which might enable the replacement of the current igloo-types, in terms of cost and protection capability. In the numerical analysis the obtained numerical values have proved that these facilities have sufficient protection capability. In addition, it could be concluded that these facilities are also cost-competitive, if more than five positions are constructed simultaneously.

• 대한산업공학회지
• /
• 제37권3호
• /
• pp.171-179
• /
• 2011

In this paper, we deal with the vehicle routing problem that could establish operational plan of military engineer for survivability support of artillery position construction. We propose VRPTW(vehicle routing problem with time-window) model of special form that considered service level to reflect the characteristics of military operations rather than the logic of economic efficiencies in the objective function. Furthermore we suggest modified particle swarm optimization algorithm for service based vehicle routing problem solution that can be possible to search in complicated and uncertain area and control relation softly between global and local search.