• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1624-1629
• /
• 2008

The governing equations in generalized curvilinear coordinates for a 3D pulsatile flow are the Incompressible Navier-Stokes (INS) equations with the artificial dissipative terms and continuity equation discretized using a second-order accurate, finite volume method on the nonstaggered computational grid. This method adopts a dual or pseudo time-stepping Artificial Compressibility (AC) method integrated in pseudo-time. The computational technique implements the implicit approximate factorization method of the Beam and Warming method (1978), which is the extension of the Alternate Direction Implicit (ADI) method. The algorithm yields practically identical velocity profiles and secondary flows that are in excellent overall agreement with an experimental measurement (Rindt & Steenhoven, 1991).

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.131-167
• /
• 2009

Global warming is regarded as one of the most critical issues that should be taken care of by the entire global community as it threatens the survival of mankind. South Korea, in particular, undergoes faster warming than the average rate of global warming. South Korea has revealed various warming rates and trends being surrounded by sea on three sides and having complex terrains dominated by mountains. The rates vary according to regions and their urbanization and industrialization. Differences also derive from seasons and weather elements. Changes to the highest, mean, and lowest temperature are also different according to the characteristics of regions and observatories, which is more apparent where the force of artificial weather applies. In an urban area, temperature gaps tend to decrease as the lowest temperature rises more than the highest temperature. Meanwhile, temperature gaps grow further in a coastal or country region where the force of artificial weather is small and the force of natural weather prevails. In this study, the investigator analyzed the changes to the weather elements of 11 observation spots that had gone through no changes in terms of observation environment since 1961, were consecutively observed, and had the quality of their observation data monitored on an ongoing basis. Using the results, I tried to identify natural and artificial causes affecting certain spots. Located on the east coast of the Asian Continent, South Korea sees weather changing very dynamically. Having huge influences on our weather, China has achieved very rapid industrialization for the last 30 years and produced more and more greenhouse gases and air pollution due to large-size development projects. All those phenomena affect our weather system in significant ways. Global warming continues due to various reasons with regional change differences. Thus the analysis results of the study will hopefully serve as basic data of weather statistics with which to set up countermeasures against climate changes.

• 한국농림기상학회지
• /
• 제16권3호
• /
• pp.219-226
• /
• 2014

기후변화 대응 산림 관리 방법을 개발하기 위해서는 온난화에 따른 수목의 반응을 예측하는 것이 중요하다. 본 연구는 우리나라 주요 활엽수종인 거제수나무(Betula costata), 물푸레나무(Fraxinus rhynchophylla), 굴참나무(Quercus variabilis) 묘목의 실외 인위적 온난화에 대한 생장 반응을 알아보기 위하여 수행되었다. 이를 위해 적외선등을 이용하여 지속적으로 기온을 $3^{\circ}C$ 증가시킬 수 있는 실외 인위적 온난화 시스템을 구축하고, 활엽수 3개 수종을 파종한 후, 온도 증가에 대한 발아 당년 묘목의 생장, 생물량 분배 및 순광합성률의 반응을 분석하였다. 연구 결과, 거제수나무, 물푸레나무, 굴참나무 묘목의 생장은 실외 인위적 온난화 처리에 대하여 수종과 시기에 따라 서로 다른 반응을 나타냈다. 즉 거제수나무는 온난화 처리에 따라 근원경 대비 묘고 비율, 총 생물량, 지상부 대비 뿌리 중량 비율, 순광합성률 등이 감소한 반면, 굴참나무는 근원경, 묘고, 총 생물량, 순광합성률 등이 증가하였으며, 물푸레나무는 다른 수종에 비하여 생장 반응이 뚜렷하지 않았다. 시기별 반응으로는, 7월에는 모든 수종에 대하여 온난화 처리에 따른 변화가 나타나지 않았으나 11월에는 굴참나무의 근원경, 묘고, H/D율이 증가한 반면 거제수나무의 H/D율이 감소하였다. 온난화에 대한 수종별 생장 반응의 차이는 순광합성률 및 생물량 분배의 수종별 반응과 유사하게 나타나, 온도 증가에 의한 순광합성률과 생물량 분배의 수종별 차이가 생장에 영향을 미친 것으로 생각된다. 한편, 여름에 비하여 가을에 더 두드러지게 나타난 생장 반응은 온난화에 의한 식물 계절 특성의 변화에 의한 것으로 보인다. 활엽수 3개 수종에 대하여 온난화에 의한 수종 특이적 생장 반응을 밝힌 본 연구 결과는 기후변화에 대응한 산림 관리 정책 개발에 활용될 수 있을 것으로 사료된다.

• 한국지구과학회지
• /
• 제36권6호
• /
• pp.501-511
• /
• 2015

본 연구에서는 북극과 남극에서 기온과 수온이 영하임에도 불구하고 얼음이 없는 광범위한 지역(인공증빙가능역)이 존재하는 것에 주목하여, 이 지역에 인공적으로 해빙을 생성하여 지구 표면의 알베도를 높이는 방식으로 지구온난화를 완화하는 방법을 제안하였다. 대략 $4.09{\times}10^6km^2$의 해빙면적이 추가되면 지구온난화 효과로 가정되는 약 $0.85Wm^{-2}$ 에너지가 상쇄된다고 계산되었다. 또한, 인공적으로 해빙을 생성하기 위한 세 가지 빙판 생성 방법(배로 물 뿌리기, 빙판생성장치 운용, 수면에 GCF부유물질 띄우기)을 제안하였다. 간단한 에너지평형모형 실험에 따르면, 3개월 (9, 10, 11월) 동안 인공증빙가능역에 해빙을 최대로 생성할 경우, 다음해에 대략 $0.11^{\circ}C$의 지구표면온도 하강이 기대되었다. 반면에 모든 계절을 통해 생성할 경우, 오히려 지구 냉각화를 초래할 위험성도 발견되었다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4282-4286
• /
• 2023

Nuclear energy is estimated by the machine learning method as the mathematical quantifications where neural networking is the major algorithm of the data propagations from input to output. As the aspect of nuclear energy, the other energy sources of the traditional carbon emission-characterized oil and coal are compared. The artificial intelligence (AI) oriented algorithm like the intelligence of a robot is applied to the modeling in which the mimicking of biological neurons is utilized in the mathematical calculations. There are graphs for nuclear priority weighted by climate factor and for carbon dioxide mitigation weighted by climate factor in which the carbon dioxide quantities are divided by the weighting that produces some results. Nuclear Priority and CO2 Mitigation values give the dimensionless values that are the comparative quantities with the normalization in 2010. The values are 1.0 in 2010 of the graphs which are changed to 24.318 and 0.0657 in 2040, respectively. So, the carbon dioxide emissions could be reduced in this study.

• 한국수자원학회논문집
• /
• 제38권7호
• /
• pp.575-584
• /
• 2005

수질오염 사고를 판단하기위한 경보모형은 다중퍼셉트론과 다층신경망, 뉴로-퍼지 모형들로 구성되었으며, 개발된 기준축에 따른 안정, 주의, 경고 상태를 학습하였다. 수질예측 모형에 유출예측 모형을 연계하고 경보모형을 결합하여 인공지능 시스템을 구축하였으며, 구축된 시스템을 GUI로 구현하였다. GUI 화면은 초기화면, 자료 전처리 과정, 유량예측 과정, 수질예측 과정, 경보시스템의 순으로 진행된다. 수질오염 사고에 대한 시나리오를 작성하여 시스템의 적용성을 검토하였으며, 인공지능 경보시스템은 이상수질에 대하여 위험 및 안정 상태를 적합하게 구별하는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.171-172
• /
• 2015

Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, the waste porcelain is applied to the artificial stone and the durability property of the artificial stone according to it tries to be investigated.

• 한국환경과학회지
• /
• 제12권7호
• /
• pp.705-713
• /
• 2003

In mid-August 2002, under clear summer pressure patterns, we carried out an intensive meteorological observation to examine the warming effects due to artificial constructions in a large housing complex. We set an automatic weather system(AWS) at two places in a bare soil surface within a limited development district and an asphalt surface within a large apartment residence area, respectively. As a result of observation, it became clear that the difference of the surface air(ground) temperature between the bare soil surface and its peripheral asphalt area reached about 4$^{\circ}C$(13$^{\circ}C$) at the maximum from diurnal variation of surface temperatures on AWS data. Through the heat balance analysis using measurement data, it became clear that the thermal conditions at two places are dependent on the properties of surface material. The latent heat flux over the bare soil surface reached to about 300 W/㎡, which is more than a half of net radiation during the daytime. On the other hand, it was nearly zero over the asphalt surface. Hence, the sensible heat flux over the asphalt surface was far more than that of the bare soil surface. The sensible heat flux over the asphalt surface showed about 20∼30 W/㎡ during the night. It was released from asphalt surface which have far more heat capacity than that of bare soil surface.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.51-52
• /
• 2014

Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, because of being the magnesia phosphate ceramics, the waste porcelain is applied and the anti-wearing character of the artificial stone according to it tries to be investigated.