• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.113-116
• /
• 1996

A model of a photovoltaic array written in PSPICE is presented in this paper. PSPICE is used to display array characteristics (I-V, P-V curve) as a function of parameters such as insulation and temperature. This paper is display in detail through a example of SM-50 model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.989-992
• /
• 2001

(Ba$\sub$0.6-x/Sr$\sub$0.4/Ca$\sub$x/)TiO$_3$(x=0.10, 0.15, 0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of the composition ratio and sintering temperature were studied. The BSCT(50/40/10) specimen sintered at 1500$^{\circ}C$ showed the highest average grain size(18.25 ${\mu}$m). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 1450$^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively. Dielectric constant at room temperature decreased with increasing an applied field, tunability of the BSCT(50/40/10) sintered at 1300$^{\circ}C$ was 18%.

• 한국광학회지
• /
• 제20권2호
• /
• pp.118-122
• /
• 2009

PET 필름 위에 LCD 백라이트의 프리즘 집광시트의 역할을 대체 할 수 있는 microlens array(MLA) 시트를 설계하고 제작하였다. Photoresist thermal reflow 공정으로 두께 $100{\mu}m$ PET 필름 위에 MLA를 제작하였고, 노광 시간과 reflow의 온도, 시간 등의 변수에 따른 MLA의 형상 변화를 측정하였다.

• 한국재료학회지
• /
• 제24권9호
• /
• pp.451-457
• /
• 2014

We developed a high-performance methane gas sensor based on a $SnO_2$ hollow hemisphere array structure of nano-thickness. The sensor structures were fabricated by sputter deposition of Sn metal over an array of polystyrene spheres distributed on a planar substrate, followed by an oxidation process to oxidize the Sn to $SnO_2$ while removing the polystyrene template cores. The surface morphology and structural properties were examined by scanning electron microscopy. An optimization of the structure for methane sensing was also carried out. The effects of oxidation temperature, film thickness, gold doping, and morphology were examined. An impressive response of ~220% was observed for a 200 ppm concentration of $CH_4$ gas at an operating temperature of $400^{\circ}C$ for a sample fabricated by 30 sec sputtering of Sn, and oxidation at $800^{\circ}C$ for 2 hr in air. This high response was enabled by the open structure of the hemisphere array thin films.

• 설비공학논문집
• /
• 제30권1호
• /
• pp.1-9
• /
• 2018

Thermal performance of a heat sink for an inverter power stack was analyzed in terms of array and installation location of an Insulated Gate Bipolar Transistor (IGBT). Thermal flow around the heat sink was calculated with a numerical model that could simulate forced convection. Thermal performance was calculated depending on the array and location of high- and low-power IGBTs considering the maximum temperature of IGBT. The optimum array and installation location were found and causes were analyzed based on results of numerical analysis. For the numerical analysis, experiment design considered the installation location of IGBT, ratio of heat generation rates of high- and low-power IGBTs, and velocity of the inlet air as design variables. Based on numerical results, a correlation that could calculate thermal performance of the heat sink was suggested and the maximum temperature of the IGBT could be predicted depending on the installation method.

• Journal of Radiation Protection and Research
• /
• 제45권1호
• /
• pp.35-44
• /
• 2020

Background: Cadmium zinc telluride (CZT) is a promising material because of a high detection efficiency, good energy resolution, and operability at room temperature. However, the cost of CZT dramatically increases as its size increases. In this study, to achieve a large effective volume with relatively low cost, an array structure comprised of individual virtual Frisch-grid CZT detectors was proposed. Materials and Methods: The prototype consisted of 2 × 2 CZTs, a holder, anode and cathode printed circuit boards (PCBs), and an application-specific integrated circuit (ASIC). CZTs were used and the non-contacting shielding electrode method was applied for virtual Frisch-grid effect. An ASIC was used, and the holder and the PCBs were fabricated. In the current system, because the CZTs formed a common cathode, a total of 5 channels were assigned for data processing. Results and Discussion: An experiment using ¹³⁷Cs at room temperature was conducted for 10 minutes. Energy and timing information was acquired and the depth of interaction was calculated by the timing difference between the signals of both electrodes. Based on obtained three-dimensional position information, the energy correction was carried out, and as a result the energy spectra showed the improvements. In addition, a Compton image was reconstructed using the iterative method. Conclusion: The virtual Frisch-grid CZT detector based on the array structure was developed and the energy spectra and the Compton image were successfully acquired.

• 한국태양에너지학회 논문집
• /
• 제35권2호
• /
• pp.43-52
• /
• 2015

The performance of a photovoltaic array is affected by temperature, solar insolation, partial shading effect, and array configuration. Maximum power point tracking(MPPT) techniques are employed in photovoltaic systems to make full utilization of the PV array output power which depends on solar irradiation and ambient temperature. As much as MPPT is important in photovoltaic systems, many MPPT techniques have been developed. In this paper, several major existing MPPT methods are comparatively analyzed and novel hybrid MPPT algorithm is proposed. The proposed hybrid MPPT algorithm is developed in combination with traditional MPPT methods to complement each other for improving performance and mitigating partial shading effects. The proposed algorithm is implemented and validated using MATLAB/Simulink simulation tool.

• 한국추진공학회지
• /
• 제21권5호
• /
• pp.29-36
• /
• 2017

본 연구에서는 수치해석을 통해 장기체공 무인기(HALE UAV)에 사용되는 태양전지에 대해 유동 및 열전달 해석을 수행하였다. 무인기가 운용되는 성층권에서는 강한 태양복사에너지가 유입되며, 자연대류에 의한 열전달이 감소하고 주위 유동에 의한 강제대류의 지배를 받는다. 이러한 환경에서의 태양전지 온도범위를 예측하기 위해 주익에 부착되어 있는 태양전지모듈을 대상으로 복합열전달 해석을 수행하였으며, 성층권 환경에서 시간에 따른 태양복사에너지, 비행속도, 밀도, 온도 등의 외기환경이 태양전지의 온도분포와 열전달 특성에 미치는 영향을 분석하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.581-586
• /
• 2002

The development of 2-D radiometer is a new technical challenge for space borne remote sensing area. The Y-type antenna array has been proposed as a most efficient configuration because a large alias free FOV and a small-synthesized beam-width can be achieved compared to L-, T-type under the fixed antenna spacing. New configuration of antenna array, which is called sub-Y type configuration, is proposed to obtain a higher angular resolution than the case of Y-type array in the paper. The sub-Y type array is consisted of basic arrays, which are the Y-type array of four antenna elements. To analyze characteristics of the proposed configuration, the synthesized beam pattern is simulated through simulation. The secondary effect of the sub-Y-type is that the reconstructed image is suffered from the alias effect is appeared around the real target. The ghost targets in the reconstructed image can be reduced by the alias suppression algorithm introduced in this paper. In conclusion, the performance evaluation by use of array factor simulation shows more than 37.5% improvement in average for angular resolution and almost similar performance for temperature resolution.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.1-5
• /
• 1985

본 연구에서는 단일모드 광섬유에서의 온도에 의한 위상변조 현상을 분석하고 단일모드 광섬유 간섭계를 이용한 온도센서를 설계. 제작하여 그 온도특성을 조사하였다. 설계한 fiber-optic온도센서는 Mach-Zehnder 간섭계를 이용한 위상감지형 고감도 센서로서 온도변화는 간섭무의의 이동으로써 측정되어졌다. 간섭계에 의한 측정에서 중요한 문제중의 하나는 온도분만 아니라 모든 피측정 물리량의 변화방향에 따른 간섭무의의 이동갯수와 이동방향을 동시에 측정하는 것이다. 이를 위해 다중모드 광섬유를 이용한 배열 검출기를 제작하여 매우 간편하게 간섭무늬의 이동갯수와 이동방향을 측정하였다.