• Honam Mathematical Journal
• /
• v.44 no.2
• /
• pp.244-258
• /
• 2022

In this work, by using an integral identity together with both the Hölder and the power-mean integral inequalities we establish several new inequalities for n-times differentiable arithmetic-harmonically-convex function. Then, using this inequalities, we obtain some new inequalities connected with means. In special cases, the results obtained coincide with the well-known results in the literature.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.145-149
• /
• 2015

A reconfigurable lighting engine for widely used lighting models is proposed for low-power GPU shaders. Conventionally, lighting operations that involve many complex arithmetic operations were calculated by the shader programs on the GPU, which led to a significant energy overhead. In this letter, we propose a lighting engine to improve the energy-efficiency by supporting the widely used advanced lighting models in hardware. It supports the Blinn-Phong, Oren-Nayar, and Cook-Torrance models, by exploiting the logarithmic arithmetic and optimizing the trigonometric function evaluations for the energy-efficiency. Experimental results demonstrate 12.7%, 42.5%, and 35.5% reductions in terms of power-delay product from the shader program implementations for each lighting model. Moreover, our work shows 10.1% higher energy-efficiency for the Blinn-Phong model compared to the prior art.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.678-682
• /
• 2005

IETF suggested AAA for safe and reliable user authentication on various network and protocol caused by development in internet and increase in users. Diameter standard authentication system does not provide mutual authentication and non-repudiation. AAA authentication system using public key was suggested to supplement such Diameter authentication but application in mobile service control nodes is difficult due to overhead of communication and arithmetic. ID based AAA authentication system was suggested to overcome such weak point but it still has the weak point against collusion attack or forgery attack. In this thesis, new ID based AAA authentication system is suggested which is safe against collusion attack and forgery attack and reduces arithmetic quantity of mobile nodes with insufficient arithmetic and power performance. In this thesis, cryptological safety and arithmetical efficiency is tested to test the suggested system through comparison and assessment of current systems. Suggested system uses two random numbers to provide stability at authentication of mobile nodes. Also, in terms of power, it provides the advantage of seamless service by reducing authentication executing time by the performance of server through improving efficiency with reduced arithmetic at nodes.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1338-1348
• /
• 2017

In this study, a modified ripple correlation control (RCC) maximum-power point-tracking (MPPT) algorithm is proposed for a single-stage single-phase voltage source inverter (VSI) on a grid-connected photovoltaic system (GCPVS). Unlike classic RCC methods, the proposed algorithm does not require high-pass and low-pass filters or the increment of the AC component filter function in the voltage control loop. A simple arithmetic mean function is used to calculate the average value of the photovoltaic (PV) voltage, PV power, and PV voltage ripples for the MPPT of the RCC method. Furthermore, a high-accuracy and high-precision MPPT is achieved. The performance of the proposed algorithm for the single-stage single-phase VSI GCPVS is investigated through simulation and experimental results.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.219-225
• /
• 2010

Purpose: Usefulness in predicting the power of spherical rigid gas-pearmeable (RGP) lenses prescription using dioptric power matrices and arithmetic calculations was evaluated in this study. Noncycloplegic refractive errors and over-refractions were performed on 110 eyes of 55 subjects (36 males and 19 females, aged $24.60{\pm}1.55$years) in twenties objectively with an auto-refractometer (with keratometer) and subjectively. Tear lenses were calculated from keratometric readings and base curves of RGP lenses, and the power of RGP lenses were computed by a dioptric power matrix and an arithmetic calculation from the manifest refraction and the tear lens, and were compared with those by over-refractions in terms of spherical (Sph), spherical quivalent (SE) and astigmatic power. Results: The mean difference (MD) and 95% limits of agreement (LOA=$MD{\pm}1.96SD$) were better for SE (0.26D, $0.26{\pm}0.70D$) than for Sph (0.61D, $0.61{\pm}0.86D$). The mean difference and agreement of the cylindrical power between matrix and arithmetic calculation (-0.13D, $-0.13{\pm}0.53D$) were better than between the others (-0.24D, $0.24{\pm}0.84D$ between matrix and over-refraction; -0.12D, $0.12{\pm}1.00D$ between arithmetic calculation and over-refraction). The fitness of spherical RGP lenses were 54.5% for matrix, 66.4% for arithmetic calculation and 91.8% for over-refraction. Arithmetic calculation was close to the over-refraction. Conclusions: In predicting indications and powers of spherical RGP lens fitting, although there are the differences of axis between total (spectacle) astigmatism and corneal astigmatism, Spherical equivalent using an arithmetic calculation provides a more useful application than using a dioptric power matrix.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.630-635
• /
• 2014

In this paper, hardware architecture of BAE (binary arithmetic encoder) was proposed for HEVC (high efficiency video coding) CABAC (context-based adaptive binary arithmetic coding) encoder. It can encode each bin in a single cycle. It consists of controller, regular encoding engine, bypass encoding engine, and termination engine. The proposed BAE was designed in Verilog HDL, and it was implemented in 180 nm technology. Its operating speed, gate count, and power consumption are 180 MHz, 3,690 gates, and 2.88 mW, respectively.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.488-499
• /
• 1997

The measurements of the moderator temperature coefficient (MTC) are performed to demonstrate that the calculational model produces results that are consistent with the measurements. Since negative MTC is also a technical specification value that may limit the cycle length, it is important to measure it as accurately as possible. In this report, preferred choice of test method depending on the time in cycle, best power indication and temperature definition in MTC calculation were determined based on the MTC test results taken during initial startup testing and at 2/3 cycle burnup in the Yonggwang nuclear power plant. The results show that the ratio and rodded methods provided good agreement with the predictions during initial startup testing. However, near end-of-cycle the depletion method gives better results, and so is suggested to be used in the MTC measurements at 2/3 cycle burnup. The use of primary Delta T power as a power indicator in the MTC calculations is highly advisable since it responds with good consistent results very quickly to changes unlike secondary calorimetric power. For the appropriate temperature definitions used in the MTC calculations, it is considered that the arithmetic average temperature measured simply by inlet and outlet thermocouples is preferred. Although volumetric average temperature provides better results, the improvement is not sufficient to compensate for the simplicity of calculations by arithmetic average temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.857-864
• /
• 2006

This paper describes a design of low-power/small-area arithmetic circuits which are vector processing unit powering nit, divider unit and square-root unit for mobile 3D graphic accelerator. To achieve area-efficient and low-power implementation that is an essential consideration for mobile environment, the fixed-point f[mat of 16.16 is adopted instead of conventional floating-point format. The vector processing unit is designed using redundant binary(RB) arithmetic. As a result, it can operate 30% faster and obtained gate count reduction of 10%, compared to the conventional methods which consist of four multipliers and three adders. The powering nit, divider unit and square-root nit are based on logarithm number system. The binary-to-logarithm converter is designed using combinational logic based on six-region approximation method. So, the powering mit, divider unit and square-root unit reduce gate count when compared with lookup table implementation.

• The Pure and Applied Mathematics
• /
• v.19 no.3
• /
• pp.305-313
• /
• 2012

In this note we study Nesbitt's Inequality and modify it to make several inequalities. We prove some inequalities by using power series and Cauchy-Schwarz Inequality.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.218-220
• /
• 2004

Orthogonal frequency division multiplexing(OFDM) is one of the most promising technique for next generation wireless broadband communication systems. In this paper, we propose a new bit allocation algorithm in multiuser OFDM. The proposed algorithm is derived from the geometric progression of the additional transmit power of subcarriers and the arithmetic-geometric means inequality. The simulation shows that this algorithm has similar performance to the conventional adaptive bit allocation algorithm and lower computational complexity than the existing algorithms.