• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.206-206
• /
• 2011

Nanoparticles have been received great attention from many researchers for several decades because of their good and unique properties. In particular, researches in the field of synthesis of bimetallic nanoparticles showed good results for the past ten years. In this research, Pd thinlayer on Au nanoparticles were synthesized by electrochemical deposition method. Well-defined Au(111) nanoparticles were synthesized by solution based reduction method. Electrochemical deposition conditions for Pd thinlayer on Au(111) nanoparticles surface were carefully regulated by controlling parameters of cyclic voltammetry. To calculate exact mass and surface area catalytic activities of deposited Pd thinlayer on Au(111) nanoparticle, electrochemically active surface area (ECSA) and mass of the deposited Pd thinlayer were measured by cyclic voltammetry in 0.1 M HClO4 solution. Afterward, catalytic activities of the deposited Pd thinlayer were measured in 0.1 M HClO4 + 0.2 M formic acid solution. In case of less negative deposition potential, the amounts of deposited Pd mass and surface area were small. However, mass and ECSA activity of the deposited Pd to oxidize formic acid were increased.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.147-158
• /
• 2017

Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

• 한국조경학회지
• /
• 제51권6호
• /
• pp.75-87
• /
• 2023

본 연구는 조경·정원분야 기후변화 대응을 위한 역할로서 자연기반해법의 실증을 위한 실험적 설계를 제시하고, 탄소중립 사회를 위한 공간 전략적 방안과 문화 산업으로서의 역할을 제시하는 목적으로 진행되었다. 환경 보호와 탄소중립 사회 형성을 목표로 저 관리형 정원으로서의 탄소저감 효과를 위한 전략을 제시하고자 한다. 이를 위해 본 연구에서는 모델정원의 기능과 공간 요소, 탄소중립과 관련된 내용들을 보다 과학적인 데이터로 수집할 수 있도록 실질적 모델정원을 설계하고 조성하였다. 대상지는 국립세종수목원 내에 위치한다. 탄소저감 기능을 측정하는 실험구를 중심적으로 배치하며, 그 외 공간은 드라이가든과 커뮤니티 가든, 초화원 등으로 전시와 휴식을 할 수 있는 공간을 두었다. 실험구는 바이오차 부설 양, 식재밀도, 식재 수종에 따른 탄소저감 효과를 분석할 수 있게 타입을 구분하였다. 탄소저감을 위한 시설 적용과 시공 방식은 '지구를 위한 10가지 탄소정원 가꾸기'의 방식을 적용하였다. 대표적으로 빗물의 활용시설, 저탄소 인증 목재 활용, 인근지역 자재 사용을 적용하였다. 또한 각각의 시설 및 시공 방식에 따른 탄소저감 효과를 비교하여 제시하였다. 이 결과는 탄소중립 사회를 실현하기 위한 대응 방안을 모색하는 데에 중요한 기초 연구가 될 것으로 기대되며, 정원 산업 등 지속 가능한 발전이 필요한 다양한 분야에서의 참고가 될 것으로 기대한다.

• 대한두개안면성형외과학회지
• /
• 제10권1호
• /
• pp.33-36
• /
• 2009

Purpose: Fractures of the mandibular condylar area are common injuries that account for 29% to 40% of fractures of the facial bones and represent 20% to 62% of all mandibular fractures. Currently 3 main methods are being used in the treatment of mandibular subcondylar fractures: closed reduction; open reduction and internal fixation; Endoscopic reduction and internal fixation. Each method has its proponents and opponent as well as advantages and disadvantages, and indications for each vary among surgeons. There are six approaches of open reduction: submandibular, retromandibular, preaurilcular, postauricular, intraoral, transparotid approach. Among them, transparotid approach has been described for subcondylar exposure with dissection in the direction of facial nerve fibers to expose the bone through the parotid gland. This approach carries the risk of a parotid glandular fistula as well as facial nerve injury but has the advantage of being directly over the fracture site. We report safety and efficacy of surgical treatment using a transparotid approach for direct plating. Methods: A 43-year-old man sustained multiple facial bone fractures by driver traffic accident. Mandibular subcondyle was fractured and dislocated internally. We performed open reduction and internal fixation by transparotid approach. Fractured site was fixed by titanium mini plate & screw. We applicated arch bar for approximately 3 weeks. Results: Follow-up length was about 5months. Scar of surgical incision was indistinct, there was no symptoms and signs of facial nerve and parotid gland injury, and maximal mouth opening was measured 49.5 mm. Conclusion: Transparotid approach has high risks of facial nerve and parotid gland injury, but paradoxically it is the most effective technique in saving facial nerve. Open reduction and internal fixation of mandibular subcondylar fracture by transparotid approach with precise and versed procedure, best outcome can be expected.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• 한국작물학회지
• /
• 제65권4호
• /
• pp.353-364
• /
• 2020

국내 주요 재배 콩 품종을 대상으로 수확 지연 시 강우에 따른 피해 양상 및 수확방법에 따른 종실 및 수량 특성을 분석하고자 본 실험을 수행하였으며, 결과를 요약하면 아래와 같다. 1. 품종별 탈립률의 차이가 나타났으며, 대원콩에서는 강우처리 및 예취 후 비닐피복 에서 40일 수확 지연 시 탈립률이 5.3% 증가하였으나, 풍산나물콩은 강우 무처리 및 예취 후 비닐피복에서 40일 수확 지연 시 41.8%까지 증가하였다. 2. 100립중은 강우처리 및 수확방법에 따라 수확이 지연될수록 입중이 미세하게 낮아지는 경향을 보였으나 강우처리 후 포장 수확한 경우를 제외하고 유의성이 인정되지 않았다. 3. 수량은 대원콩의 경우 강우처리 및 예취 후 비닐피복 할 경우 수량 감소가 가장 크게 나타났으며 적기 수확기 이후 40일 지연 수확할 경우 일당 평균 감수율은 0.8 kg ha^-1, 풍산나물콩은 강우 무처리 및 예취 후 비닐피복에서 적기 수확기 이후 40일 지연 수확할 경우 일당 평균 감수율은 3.4 kg ha^-1로 나타났다. 4. 강우처리 및 수확방법에 따른 이병립률은 유의한 차이가 나타났으며, 수확 지연에 따라 이병률도 증가하였으며, 강우처리 및 포장 수확에서 이병률이 가장 높았고, 40일 지연 수확 시 대원콩은 7.0%, 풍산나물콩은 4.0%로 증가하였다. 5. 강우 무처리시 포장 수확 및 예취 후 비닐피복의 수확방법에 따른 차이는 적었으며, 수확이 지연되어도 95%이상의 발아율을 유지하였다. 강우처리 시 수확 지연에 따라 발아율은 현저하게 낮아졌으며, 포장 수확의 경우 40일 수확을 지연하면 대원콩은 77.2%, 풍산나물콩은 76.5%까지 발아율이 감소하였다. 6. 조단백질 함량은 시험 품종 모두 강우처리에 따라 무처리구에서 다소 높은 것으로 나타났으며, 수확방법에서도 예취 후 비닐피복에 비하여 포장 수확에서 높은 함량을 나타냈다. 조지방 함량은 강우를 처리할 경우 다소 높게 나타났으며, 수확방법에서는 예취 후 비닐피복에서 높은 함량을 보였다. 7. 100립중은 개별 처리에 대한 효과가 적어 처리간 상호적용 효과가 적었으나, 이병립률 및 발아율은 처리간 상호작용 효과가 높았다. 8. 품종별 탈립률의 처리간 상호작용 효과는 수량의 상호작용 효과와 같은 양상을 나타내어, 탈립률이 수량에 가장 영향을 준 것으로 나타났다.

• 무역상무연구
• /
• 제45권
• /
• pp.191-238
• /
• 2010

The purpose of this paper is to make research on the trend of the worldwide medical device market, the trend of the medical device market in the major foreign countries, the present status of the medical device industry in Korea and Gangwon area, the present status of export competitive power and the SWOT analysis of competitive power of the medical device industry in Gangwon area, and the strengthening methods of export competitive power of the medical device industry in Gangwon area. As the research method, the questionaire for the strengthening of export competitive power of the medical device industry in Gangwon area was carried out from August 13 to Otober 22, 2009. The worldwide medical device market in 2008 is estimated at USD 210.2 billion, with the United States being the largest market, followed closely by Japan and Western Europe. In 2006, the worldwide export amount of medical devices recorded USD 121.1 billion and the worldwide import amount of medical devices recorded USD 126.3 billion. As of the end of 2008, the number of Korea's medical device manufacturers expanded to 1,726. The production amount of Korea's medical device industry in 2008 recorded 2,525 billion won, and the domestic market volume of medical devices in 2008 recorded 3,618 billion won. Korea's export amount of medical devices in 2008 recorded USD 1,132 million and recorded a 9.67% growth compared to the previous year, and the import amount of medical devices recorded USD 2,123 million and recorded a 1.43% reduction compared to the previous year. As of the end of 2008, the number of Gangwon area's medical device manufacturers expanded to 81. The production amount of Gangwon area's medical industry in 2008 recorded 380 billion won, and Gangwon area's export amount of medical devices recorded USD 269 million and recorded a 0.25% reduction compared to the previous year, and the import amount of medical devices recorded USD 3 million and recorded a 39.63% reduction compared to the previous year. According to the result analysis of the questionaire for the strengthening of export competitive power of medical device industry in Gangwon area(August 13~October 22, 2009), the competing country of the export medical device is the United States being the highest ranking. Comparing to the collective competitive power level 100 of the competing country, the collective competitive level of the export medical device is 60 below and 70-80 below being the highest ranking. Comparing to the quality level 100 of the United States, EU and Japan, the quality level of the export medical device is 80-90 below being the highest ranking. Comparing to the design level 100 of the United States, EU and Japan, the design level of the export medical device is 90-100 below being the highest ranking. Comparing to the technology level 100 of the United States, EU and Japan, the technology level of the export medical device is 80-90 below being the highest ranking. According to the SWOT analysis of competitive power of medical device industry in Gangwon area, the strength is the abundant expert manpower of the medical device in Wonju area. The weakness is the fragility of the brand recognition of the medical device industry. The opportunity is the demand increase of the new medical device owing to the advanced age of population. The threat is the difficulty of entry into overseas market owing to the request of the new specification certification of the medical device. In order to strengthen the export competitive power of the medical device industry in Gangwon area, the following measures should be taken by the government, local self-government body, related organization and medical device industry : the development of new technology and design, the enhancement of brand recognition. the acquisition of the foreign specification certification, the building of overseas distribution channel and after sales service channel, the positive participation in overseas medical device exhibition and opening of medical device exhibition, the training of expert manpower, the strengthening of overseas marketing, and the application of FTA and the establishment of counter measures against FTA. In conclusion, the medical device industry in Gangwon area has the difficulty in the entry into the overseas market owing to the shortage of overseas marketing capability. Therefore, the government and local self-government body should make the intensive and systematical support for overseas marketing of the medical device industry. For the support of overseas marketing, the government and local self-government body should provide positively the support of expenses for the acquisition of foreign specification certification, the support of participation in the overseas medical device exhibition, the despatch of market development mission, the increase of the support amount for R&D investment fund, and the training of expert manpower of medical devices.

• 한국정보전자통신기술학회논문지
• /
• 제13권6호
• /
• pp.461-469
• /
• 2020

본 논문에서는 손글씨 숫자 데이터셋, 얼굴 데이터셋의 중요영역 추출을 위한 PCA 기반의 특징되먹임방법을 제안한다. 이전의 LDA 기반의 특징되먹임 방법을 확장하여 PCA 기반 특징되먹임 방법이 제안된다. 제안된 방법에서 데이터에 차원 축소 머신러닝 알고리듬 중 하나인 PCA 기법을 적용하여 데이터를 중요한 특징 차원들로 축소한다. 차원 축소과정에서 도출되는 weight를 통해 축소된 각 차원 축에서의 데이터 중요 지점을 확인한다. 각 차원 축은 축의 고유값의 크기에 따라 전체 데이터에서의 가중치가 다르다. 이에 각 차원 축의 고유값의 크기에 비례하는 가중치를 부여하여 각 차원 축에서의 데이터 중요 지점을 합하는 연산 과정을 거친다. 연산 과정을 통해 얻어진 데이터에 Threshold를 적용하여 데이터의 중요 영역을 구한다. 그 후 도출된 데이터의 중요 영역에 원본데이터로 역매핑을 유도하여 원본 데이터 공간에서 중요영역을 선택한다. MNIST 데이터셋에 대한 실험 결과를 확인하고 기존의 LDA 기반의 특징되먹임 방법을 통한 결과와 비교를 하여 PCA기반 특징되먹임을 기반한 패턴 인식 방법의 유효성과 가능성을 확인한다.

• 화약ㆍ발파
• /
• 제20권3호
• /
• pp.59-71
• /
• 2002

The points of this design case are the planning and excavation method of a new double-tracked railroad tunnel which is approx. 11∼22 meters apart from existing single-tracked railroad tunnel. For the optimum excavation method some needs are required in design stage, such as the reduction of noise and vibration, public resentment, damage of buildings and construction costs. Hence the estimation and application of allowable noise and vibration criterion is important. The ground coefficient (K, n) of this site is determined by field trial blasting. The excavation method is chosen to satisfy the allowable noise and vibration criterion. In addition, in order to ensure the stability of existing single-tracked railroad tunnel, the instrumentation of maintenance level is accompanied during the construction stage. As a result of this design condition, central diaphragm excavation with line drilling and pre-large hole boring blasting is applied to the area within 15 meters apart from existing tunnel. And above 15 meters apart, pre-large hole boring blasting is designed.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.89-97
• /
• 2005

Thin plate correction of forming process that it is nowadays smile change of simple contact surface as it becomes possible that forecast dictionary numerically exactly to analyze comparative big comp displacement real industry spot problems between complicated and abnormal curved line shapes and thin plate and die more reliable and need many efforts yet economical analysis method is required and develops this efficient algorithm. This research analyzes correction of forming and examined possibility and validity of spot application using One-Step Finite Element Method. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.