• Journal of Astronomy and Space Sciences
• /
• v.30 no.3
• /
• pp.145-152
• /
• 2013

Rotation-powered pulsars are excellent laboratories for studying particle acceleration as well as fundamental physics of strong gravity, strong magnetic fields and relativity. Particle acceleration and high-energy emission from the polar caps is expected to occur in connection with electron-positron pair cascades. I will review acceleration and gamma-ray emission from the pulsar polar cap and associated slot gap. Predictions of these models can be tested with the data set on pulsars collected by the Large Area Telescope on the Fermi Gamma-Ray Telescope over the last four years, using both detailed light curve fitting, population synthesis and phase-resolved spectroscopy.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.226-227
• /
• 2003

광자 크리스탈 (Photonic Crystals)은 서로 다른 유전체의 주기적인 구조로 이루어져 있으며, 전자기파가 특정한 주파수 범위에서 전파하지 못하고 차단되는 영역인 광자 밴드갭 (Photonic Band Gap)이 존재한다. 이러한 광자 밴드갭의 존재로 인하여 빛의 흐름을 조절할 수 있다는 점 때문에 반사거울, 휘어진 도파로(bent waveguide), 레이저, 채널 드롭핑 필터(channel dropping filter) 등 여러 가지 다양한 분야에 응용될 수 있다. (중략)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1779-1785
• /
• 2010

The experiment is designed to create some useful data on the dressed shapes that contribute to simulating the adaptability of clothes. We studied the dressed shapes of blouse with above-elbow sleeves and sleeveless according to five types of arm movement (basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture. Experiments were conducted to understand the dressed shape through 3-D measurement Vivid 910 and to investigate the width, depth, area distribution and gap of the shape of blouses on the section map with a software program for 3-D shape analysis, Rapid Form 2004. The Data were analyzed by factor analysis. The results of this study are as follows: The ratio of depth per width in the stand-posture was lower than other arm movements and the reach lateral was higher than the reach forward. The gap of the upper body was a briefed 4 factor; front, front-side, back, and back-side. It was higher than the sleeveless with a change of the gap in the dressed blouse with above-elbow sleeves by arm movements per stand-posture. The divisional gap shows the adaptability of clothes according to the types of blouse and arm movements in the change of the ratio.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.3
• /
• pp.207-214
• /
• 1997

We collected airborne complex mixtures in a industrial area of Yeochun, and examined whether these complex mixtures could affect gap junctional intercellular communication (GJIC) in a cultured WBF-344 rat liver epithelial cells (LEC). Since the reduction of GJIC plays an important role in chemical carcinogenesis, measurement of changes of GJIC is a meaningful method to screen carcinogenicity of these mixtures. High and low volume samples were dissolved in dimethyl sulfoxide (DMSO) and tested. Blank filter extractions were also examined for exclud-ing possible toxicity of filter itself, and TPA (12-O-tetradecanoylphorbol-13-acetate) and DMSO were used as positive and negative control, respectively. When the cells were exposed to samples at concentration below that required to maintain rather than 85% cell viability based on the result of neutral red uptake assay, maximal inhibition of GJIC was observed at 1hr after treatment with both high and low volume samples by scrape-loading dye transfer assay. In fluorescence recovery after photobleaching assay, recovery rates via gap junctions were 33%/min in high volume sample and 62%/min in low volume sample. In together, airborne samples collected in Yeochun inhibited GJIC in a cultured WBF-344 rat LEC. These results suggest airborne samples tested in this experiment may attribute to cause a certain type and degree of cancers in in vivo when exposured for some periods.

• Tribology and Lubricants
• /
• v.13 no.2
• /
• pp.52-59
• /
• 1997

An experimental study is presented for the characteristics of the high temperature superconductor as an application of the repulsive type magnetic bearing. A ring shaped YBCO type superconductor and Neodium permanent magnets are employed for the experiment. For the case of field cooling, superconductor shows strong repulsive force, which is due to the Meissner effect, as the gap between the superconductor and the magnet gets closer. The repulsive force variation with respect to the gap change shows hysterisis characteristics. The area of the loop of the hysterisis curve represents the dissipation of energy, which reveals that the magnetic bearing with superconductor has large damping. The effect of the initial gap and the magnetic flux density on the repulsive force is analyzed experimentally and the static stiffness variation is calculated from the measured repulsive force variation. The relative sliding velocity between the superconductor and the magnet has little effect on the repulsive force which is quite different from the usual sliding element bearing. As the initial gap for the field cooling becomes larger, the maximum repulsive force at the minimum gap increases and approaches to the value for the case of zero field cooling.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.125-134
• /
• 2012

In the construction industry, "Green" is emerging as a keyword of new growth engine. Since green construction competitiveness is essential for contractors' survival and growth, it is important to understand what constitutes green construction competitiveness. The objective of the study is to identify elements of green construction competitiveness and to discuss relationships between their importance and current level based on the Gap analysis. A better understanding of the elements of green construction competitiveness assists contractors in formulating green strategies. It also provides insight into what motivates contractors in establishing related policies and regulations. The study identifies that in general there exists a gap between the importance and current level of green construction competitiveness. It also demonstrates that CEO' competence shows a less gap between the importance and current level but firms' competence is an area of weakness. Finally a substantial gap is observed in the field of green R&D strategies and sub-contracting partners.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1179-1181
• /
• 2004

We have studied a single gap transflective liquid crystal display (LCD) associated with in-plane switching (IPS) mode. In the transmissive IPS cell, the transmittance of electrodes and above electrodes is different, that is, the degree of rotation of the LC director between electrodes and above electrodes is 45 $^{\circ}$ and 22.5 $^{\circ}$ , respectively. Utilizing the different rotating angle of the LC director and in-cell retarder with a quarter-wave plate used below the LC layer, the IPS transflective LCD is realized such that the area between electrodes is used as a transmissive part and the area above electrodes is used as a reflective part.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.9
• /
• pp.1085-1094
• /
• 1992

A variable-spacing cesium thermionic energy conversion test station is designed and fabricated for the study of power generation. The diode is in the form of a guard-ringed plane-parallel geometry in which a polycrystalline rhenium emitter of 2 cmS02T area faces a radiation-cooled polycrystalline rhenium collector of 1.9 cmS02T area. The emission of plasma from heated refractory electrode metal is the driving reaction in the direct conversion of heat to electricity by thermionic energy conversion. The plasma is produced from electrons and positive ions formed simultaneously by thermionic emission and surface ionization of cesium atoms incident on the hot emitter from the cesium vapor in the diode. And high plasma density causes plasma multiplication within the gap due to volume ionization that results in high power output. The variation of the saturation current of a Knudsen converter is investigated at an emitter-collector gap of 0.1 mm and an emitter temperatures. A maximum power output of 13.47 watta/cmS02T is observed at a collector temperature of 963 K and a cesium reservoir temperature of 603 K.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.453-458
• /
• 2004

A capacitate sensor is a proper device for measuring high small displacement. General design parameters and procedure are discussed and a test sensor was built to have a measuring range of 100$\mu\textrm{m}$ and a sensitivity about 30nm. This sensor has too opposing electrode of comparably large area and has nominal gap distance about 150$\mu\textrm{m}$. So as to achieve a nano order displacement sensitivity, both sensor and target system have to be considered. This is important for the sensitivity can be achieved by minimizing a system total noise level in electronic type sensor application. Typical performance of the developed sensor is demonstrated in precision moving stage having 0.1$\mu\textrm{m}$ moving resolution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.254-259
• /
• 2002

A variable air-gap type system is widely used for inductive precision position measurement systems. This type transducer has high sensitivity but lacks a linear measurement range due to structural nonlinearity. Furthermore, as measurement range increases, linearity error is also increased. The alternative is a variable overlap-area type system. The sensitivity of this type is determined by the initial air-gap dimension, keeps the original value and does not deteriorate linearity in spite of the variations of the measuring range.