• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.221-227
• /
• 2002

Tapping is a machining process that makes a female screw on parts to be assembly together. Recently, as the number of small and compact products increases the radius of tap as small as 1 mm is not unusual and more accurate tapping is needed. In complying with those needs, some high-speed tapping machines with synchronizing function have been developed. This paper describes the development of an ultra high-speed tapping machine up to 10,000rpm. The key factors in the tapping speed are the acceleration/deceleration and the synchronizing errors between spindle motor and fred motor. To minimize the acceleration/deceleration time, a low inertia spindle with a synchronous built-in servo motor was developed. To minimize the synchronizing errors, the tapping cycle algorithm was optimized on an open architecture CNC. The developed tapping machine has the acceleration/deceleration time of 0.13sec/10,000rpm for rigid tapping and the synchronizing error below 4.4%. The cycle time for tapping a female screw of M3 and depth 2 times diameter was 0.55sec.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.84-92
• /
• 2013

Blinds are a common type of shading device and are increasingly operated automatically to overcome the limitations of manual operation. Automated blinds need to be controlled to maximize benefits of daylight in the point of occupant comfort and energy consumption. However, the previous control methods could cause occupant's distractions by the undesirable control time interval and amount of blind movement. A few researches suggested the control concept for minimizing occupant's distractions by automatic blind control, but they did not provide optimal control algorithm to be useful in practice. In this paper, we propose an optimal control algorithm for automated blinds that can maximize not only visual comfort but also sunlight penetration into buildings based on occupants' preferences on blind movement and sunlight. The proposed control algorithm can prevent solar glare on workplane and minimize occupant's distractions to maximize occupants' visual comfort.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.949-952
• /
• 2005

We propose the hardwired distributed arithmetic which is applied to multiple constant multiplications and the fixed data path in the inner product of fixed coefficient as a result of variable radix-2 multi-bit coding. Variable radix-2 multi-bit coding is to reduce the partial product in constant multiplication and minimize the number of addition and shifts. At results, this procedure reduces the number of partial products that the required multiplication timing is shortened, whereas the area reduced relative to the DA architecture. Also, this architecture shows the best performance for DCT/IDCT and DWT architecture in the point of area reduction up to 20% from reducing the partial products up to 40% maximally.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.407-418
• /
• 2014

As the high-throughput requirement in the next generation communication system increases, it becomes essential to implement high-throughput SISO (Soft-Input Soft-Output) decoder with minimal hardware resources. In this paper, we present the comparison results between cascaded radix-4 ACS (Add-Compare-Select) and LUT (Look-Up Table)-based radix-4 ACS in terms of delay, area, and power consumption. The hardware overhead incurred from the retiming technique used for high speed radix-4 ACS operation is also analyzed. According to the various analysis results, high-throughput radix-4 SISO decoding architecture based on simple path metric recovery circuit is proposed to minimize the hardware resources. The proposed architecture is implemented in 65 nm CMOS process and memory requirement and power consumption can be reduced up to 78% and 32%, respectively, while achieving high-throughput requirement.

• 대한임베디드공학회논문지
• /
• 제5권1호
• /
• pp.18-22
• /
• 2010

In real-time embedded systems, the responsibility is the most important thing because it is related to human life. Context switching is a part of which can slow down the responsibility. We therefore should minimize the amount of state that needs to be saved during context switching. In this paper, we introduce a new architecture (Register Farm) for context switching which can exchange two contexts in one cycle time. Although it might increase the cost of MCU design and the complexity of circuit, it cannot miss any interrupt during context switching. Consequently, Register Farm architecture can make embedded systems spread out in human life because it can increase reliability and responsibility in real time embedded systems.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.634-646
• /
• 2015

Coarse-Grained Reconfigurable Architecture (CGRA) is a very promising platform that provides fast turn-around-time as well as very high energy efficiency for multimedia applications. One of the problems with CGRAs, however, is application mapping, which currently does not scale well with geometrically increasing numbers of cores. To mitigate the scalability problem, this paper discusses how to use the SIMD (Single Instruction Multiple Data) paradigm for CGRAs. While the idea of SIMD is not new, SIMD can complicate the mapping problem by adding an additional dimension of iteration mapping to the already complex problem of operation and data mapping, which are all interdependent, and can thus significantly affect performance through memory bank conflicts. In this paper, based on a new architecture called SIMD reconfigurable architecture, which allows SIMD execution at multiple levels of granularity, we present how to minimize bank conflicts considering all three related sub-problems, for various RA organizations. We also present data tiling and evaluate a conflict-free scheduling algorithm as a way to eliminate bank conflicts for a certain class of mapping problem.

• Earthquakes and Structures
• /
• 제5권3호
• /
• pp.261-276
• /
• 2013

Oil, hysteretic and inertial mass dampers are representatives of passive dampers used for smart enhancement of seismic performance of building structures. Since oil dampers have a nonlinear relief mechanism and hysteretic dampers possess nonlinear restoring-force characteristics, several difficulties arise in the evaluation of buildings including such dampers. The purpose of this paper is to propose a practical method for simultaneous optimal use of such dampers. The optimum design problem is formulated so as to minimize the maximum interstory drift under design earthquakes in terms of a set of damper quantities subject to an equality constraint on the total cost of dampers. The proposed method to solve the optimum design problem is a successive procedure which consists of two steps. The first step is a sensitivity analysis by using nonlinear time-history response analyses, and the second step is a modification of the set of damper quantities based upon the sensitivity analysis. Numerical examples are conducted to demonstrate the effectiveness and validity of the proposed design method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.162-174
• /
• 2014

Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate) that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.578-595
• /
• 2020

Submarine pressure hulls must withstand high hydraulic pressure and be free of defects. To improve the precision of defect detection, we herein examined different probes for optimal defect assessment by applying the Phased Array Ultrasonic Testing (PAUT) method. Two sets of probe design parameters were selected by considering pressure hull characteristics and analyzed through modeling. PAUT probes were applied, and defect assessment results were compared based on ultrasonic signals of various simulated defects in specimens designed to be the same as actual pressure hulls. The final selected design parameters for the submarine probe, which were designed to minimize the grating lobe of wave interference effect and improve the ultrasonic resolution of pressure hull welds, were identified through the experiment. The improvement in the probe's ability to detect defects in a pressure hull was verified. Furthermore, the accuracy of defect length measurement was improved, enhancing the applicability of the technique.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.96-102
• /
• 2020

The construction industry remains serious accidents, injuries, and fatalities due to it's unique, dynamic, and temporary nature. On workplace sites, Safety pre-task planning is one of the efforts to minimize injuries and help construction personnel to identify potential hazards. However, the working conditions are complicated. Many activities, including tasks or job steps, are executing at the same time and place. It may lead to an increase in the risks from simultaneous tasks. This paper contributes to addressing this issue by introducing a safety risk interaction analyzing framework. To accomplish this objective, accident reports of the Occupational Safety and Health Administration (OSHA) are investigated. The pairs of task incompatibility, which have time-space conflicts and lead to incidents, are found. Ontology technology is applied to build the risk database, in which the information is acquired, structuralized. The proposed system is expected to improve pre-task planning efficiency and relieve the burdens encountered by safety managers. A user scenario is also discussed to demonstrate how the ontology supports pre-task planning in practice.