• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.281-292
• /
• 2008

Prefabricated Board Drains (PBDs) recently become more widely used than conventional sand drains in improving soft ground because the PBD is more time and cost effective. The performance of PBDs is affected by disturbance in the adjacent soil formation during inserting mandrels, the intrusion of fine particles into filter fabric, and necking of the drain by excessive lateral pressure especially occurring in very deep clay formation such as the Busan New Port site. In this study, the PBD with double-core is introduced, which seems to overcome the shortcomings of usual single-core PBDs. An in-situ test program was established in the Busan New Port site, in which a set of the double-core PBDs and the single-core PBDs was installed to compare the efficiency of each of the drains. The discharge capacity of the double-core and the single-core PBDs was compared for various confining pressures in the modified Delft test and the chamber test. A series of CRS consolidation tests was performed in order to obtain profiles of void ratio-effective stress and void ratio-permeability relationships in the Busan New Port site that are used as input date in performing a numerical program ILLICON. The numerically simulated settlements of ground surface in the test site are in good agreement with those of in-situ measurements. In addition, the performance of the double-core and single-core PBDs has been experimentally and numerically compared in this paper.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1475-1486
• /
• 2008

Bentonite-based grouting has been popularly used to seal a borehole installed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because its high swelling potential. However, if the bentonite-based grouting is conducted in coastal areas, the salinity of groundwater changes in the mineral fabric of bentontie. In order words, an increase of cation concentration in groundwater leads to a reduction in the diffuse double-layer thickness in the bentonite mineral structure, and thus the volume of bentointe-based grouts will decrease proportional to the salinity of groundwater. In this paper, the effect of salinity (i.e., NaCl 0.5M, 0.25M, and 0.1M) on the change of swelling potential for bentonite-based grouts has been quantitatively evaluated for seven bentonite grouts from different product sources. In addition, in case of using addictives such as a silica sand to increase the thermal conductivity of bentonite-based grouts, the possibility of particle segregation has been studied considering the viscosity of grouts and salinity of groundwater.

• 대한전자공학회논문지SD
• /
• 제49권4호
• /
• pp.15-25
• /
• 2012

FPGA용 CAD툴에 대한 학계의 연구는 상용 FPGA에 적용하기에는 단순하고 비효율적인 아키텍처를 가정하고 있기 때문에 실용성 측면에서 뒤처져 왔다. 최근 상용 FPGA 아키텍처의 배치 위치 및 배선 그래프 데이터베이스를 구축하고 인터페이스를 제공함으로써 상용 FPGA에 적용할 수 있는 배치 배선 툴의 개발을 가능하게 하려는 시도가 있었다. 본 논문은 신규 FPGA 아키텍처로 개발되고 있는 K-FPGA의 경쟁력을 벤치마킹 할 수 있는 툴킷 개발에 대해 기술한다. 이는 학계 CAD 툴의 실용성 한계를 한층 더 확장하고 있다. 기존 상용 툴과 매핑, 패킹, 배치, 배선 각 단계 별로 데이터를 교환할 수 있어 세부 툴별 비교 평가가 가능하며 이전 단계의 결과물을 기다리거나 결과의 질에 영향을 받지 않으면서 각 단계를 독립적으로 개발할 수 있는 체계를 구축하였다. 또한, 상용 FPGA의 아키텍처를 추출하여 단위 셀 라이브러리를 구축함으로써 FPGA 아키텍처의 신규 개발 시 참조 설계 역할을 할 뿐만 아니라 상시 벤치마킹 환경을 제공하도록 하였다. 특히, 아키텍처 정보를 툴 내에 하드 코딩하지 않고 하드웨어 설계자에게 익숙한 표준 HDL 형식으로 기술하여 읽어 들일 수 있도록 함으로써 아키텍처에 수시로 다양한 변경을 시도하면서 최적화해도 툴이 유연하게 수용할 수 있는 데이터 구동 방식의 툴 개발을 추구하였다. 실험을 통해 단위 셀 라이브러리 및 툴 기능을 검증하였으며 개발 중에 변경되고 있는 FPGA 아키텍처 상에서 임의의 설계를 매핑해 보고 정상 동작할 지 시뮬레이션으로 검증할 수 있음을 확인하였다. 배치 및 배선 툴이 개발 중이며 이들이 완성되면 실용적이고 다양한 신규 FPGA 아키텍처들을 개발하고 그 경쟁력을 평가할 수 있게 될 뿐만 아니라 신규 아키텍처를 위한 최적화 CAD 툴 개발 연구가 활발해지는 시너지 효과도 기대할 수 있다.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.291-298
• /
• 2012

For cold weather concreting, frost damage at early age is generated in the concrete, and problems such as delaying of setting and hardening and lowering of strength manifestation emerge due to the low outside air temperature at the early stage of pouring, making the selection of an effective curing method critically important. Unfortunately, the tent sheet currently used as the curing film for heating insulation at work sites, not only has the problems of inferior permeability and extremely deteriorated airtightness, but a phenomenon of continuous fracturing is also generated along the direction of fabric of the material itself, presenting difficult circumstances for maintaining adequate curing temperature. The aim of this study was to develop an improved bubble sheet type curing film for heating insulation of cold weather concrete by combining mesh-tarpaulin, which has excellent tension properties, with bubble sheet, which offers superior insulation performance. The analysis showed that the improved curing film in which BBS1 is stacked to MT was a suitable replacement for curing films currently in use, as it has better permeability, tension property, and insulation performance than the T type film used at work sites today.

• Architectural research
• /
• 제24권2호
• /
• pp.29-40
• /
• 2022

The transition from manufacturing to service-based economies in highly developed societies during the post-industrial period resulted in the decline of the industrial landscape, leaving it abandoned or underutilized. In pursuit of revitalizing the obsolete industrial space, innovative design techniques based on adaptive reuse are applied to retrofit modern functions to create a new cultural space and preserve the historical, symbolic, and cultural importance of the abandoned industrial facilities. Design considerations based on facade redesign have proven to be one of the most adopted techniques that can help in recreating a new function for the vacant industrial buildings and integrating them into the present-day urban fabric. This paper examines the facade renovation elements used for the adaptive reuse of 15 abandoned industrial buildings presently used as multi-purpose facilities in South Korea. Through a questionnaire survey, this study analyzes the respondents' preference for different facade renovation elements in the 15 sites according to age and gender. The study found that both genders showed similar preference patterns between most elements. But on some elements, females were keener and expressed a stronger opinion than males. There were much more females than males who perceived color and material as the most important exterior elements. The findings of this study can be used for the adaptive reuse of industrial buildings according to user preferences for different facade renovation elements.

• 건축역사연구
• /
• 제32권3호
• /
• pp.77-88
• /
• 2023

In the late Joseon Dynasty, the floor of the royal palace was covered with grass mat called ji-ui. Ji-ui was produced by connecting several mats named seokja(席子) and trimming the edge with narrow fabric named seon(縇). The standard manufacturing technique was to connect the shorter sides of the seokjas by overstitching them. A room was covered with either single or multiple ji-uis, depending on the case. In the case of the main and the subsidiary halls (jeong-jeon and pyeon-jeon, respectively) where the king conducted official meetings with the civil servants, multiple ji-uis were laid out to signify the division of space, which reflected the ceremonial aspects of the governing acts. The most essential division was the distinction of yeong-wae(楹外) and yeong-nae(楹內), with the jeon-goju (a tall frontal pillar inside the hall) functioning as the breakpoint. Jeong-jeon was divided into four spaces each covered with one ji-ui: yeong-nae, yeong-wae, and the left and the right sides of the royal seat named jwa-tap(座榻). Pyeon-jeon was covered with three ji-uis that divided the hall into three spaces: yeong-nae, yeong-wae, and hu-twae(後退) (the hind section) where the royal seat was placed on.

• 한국의상디자인학회지
• /
• 제12권1호
• /
• pp.25-34
• /
• 2010

Design in the 21st Century requires showing extraordinary and revolutionary possibilities by merging multiple cultures or different art forms. 21C fashion also increases its's complexity through the blending in of other design field's styles and forms. In other words, 21C's fashion design involves not only clothing, but combines techniques, aspects and functions fulled from various design categories. As a result, Current fashion design becomes more unique, and shows various styles. From this point of view, this study focuses on creating and suggesting unique textile designs through the understanding of design processes of textiles, which are inspired by high tech architectural structures. The fundamental shape of the architectural structures were simplified into thick lines and geometric shapes. these design elements were then transferred into textile designs. As a result, unique textile looks were created, and were applied to the apparel designs by CAD to see 3d simulations. Exchanging or merging ideas of different design categories leads innovative and fresh looks. 21C is rapidly changing, and designers need to continually introduce new looks every season. Incorporating 21st Century consumption patterns, designers must understand the process of creating original designs through various methods. The innovative fabric designs for this study involved a creative process of drawing from a step by step breakdown of two separate design fields, which were then merged into one finished design. The data and research from this study can be used as a reference tool for any further applicable fashion and textile designs in the future.

• 한국실내디자인학회논문집
• /
• 제25호
• /
• pp.229-235
• /
• 2000

Although Frank Lloyd Wright represents himself as one of the greatest American master architect, the master architects contribution towards the advancement in the modern history of architecture goes beyond just creating landmark buildings. Through out his life, he was the leading architect not only in the area or architectural design but showed his talent in interior architecture, furniture, fabric, lighting fixture, art glasses, tablewares, silver wares as well as in graphic design which should cover all the elements related to the "total design" in architecture. As seen in his architectural design, the "total design" concept also reflects both beauty and logic of the nature and strengthens his theory of the organic architecture design. The research began with finding out the relationship between his architecture, nature and the supporting design elements mentioned above. the purpose of the research is to analyze the relationship of the spatial organization and the design elements in Frank Lloyd Wrights architectural works from the point of "total design" view and provide the valuable guide line for the development of the modern interior design. His design theory, based on the fundamental ideas of the nature, his organic architecture design, and reference materials to support total design concept will be discussed on chapter 2. And on chapter 3, application of the total design in his actual project will be analyzed. The data and analyzation have been completed based on written references and actual visit to the project sites. Frank Lloyd Wright placed highest value on the human beings and enjoyed presenting new ideas and forms to create better environment for the humans through his architecture and interior design projects. While he was presenting new ideas he continued to support design for democracy which has close relationship to the new frontier spirit of America. He was the master architect for the general society with accurate understanding of the life style of the public with design sensitivity shown in his concept of the total design.s concept of the total design.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.17-23
• /
• 2016

막구조물은 코팅된 직물을 주재료로 하는 구조로 연성을 가진 막을 사용하여 외부하중에 대해 안정된 형태를 유지하는 구조물을 말한다. 막에 의한 구조시스템은 대공간 시공이 가능하고 가벼우며 빛을 투과할 수 있는 등 자원 및 관리비용 절감 면에서 많은 이점을 가지고 있어 다양한 용도의 구조물에 적용되며 그 사용용도가 점차 확대되고 있는 실정이다. 하지만 막구조 건축물 및 막재가 다양해짐에도 불구하고 화재안전을 고려한 막재의 성능에 대한 기준은 미비한 실정이며 다양한 용도에 적합한 난연성능이 우수한 막재의 개발이 요구되고 있다. 따라서 본 연구에서는 시판되는 건축용 막재인 PTFE, PVDF와 PVF, ETFE 필름 막재의 방염 및 난연성능 시험 등을 통해 건축용 막재의 난연특성을 확인하였다.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.