• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.73-82
• /
• 1983

The author studied on the dental arch widths and lengths and height of palates at 3 groups of dentition: mixed dentition, early permanent dentition, young adult, having normal occlusion and dentition. The models of the 336 maxillary and mandibular case, made from alginate-base hydrocolloid impressions were measured and analyzed statistically. The result as follows; 1. The upper intercanine width increased between the mixed dentition group and early permanent dentition group but there was no change in the young adult group in both sexes. The lower intercanine width increased between the mixed dentition group and early permanent dention group in the male. 2. The upper and lower 1st bimolar width increased slightly with age in the male but there was no change in the female. 3, The sex difference found in this study was one of absolute size, the female being slightly smaller than the male in the early permanent dentition group and young adult. 4. The arch length had no notable sexual differences and decreased between the mixed dentition group and early permanent dentition group. There was no change in the arch length in the young adult. 5. The height of palate increased gradually with age.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.43-54
• /
• 1992

The purpose of this study was to obtain the guides of establishing vertical dimension by analyzing the facial and oral landmarks of Korean adults. The following conclusions were obtained from this study. 1. The ratio of bizygomatic width to dental arch width was 3.26 : 1 in male and 3.21 : 1 in female, and the ratio of vertical dimension to dental arch length was 2.49 : 1 in male and 2.39 : 1 in female. 2. It was obtained by analysis of multiple regression that the corelative formula, vertical dimension$=23.37+0.24{\times}bizygomatic$ $width+0.29{\times}dental$ arch length. 3. There was no statistically significant difference between the results of vertical dimension acquired by means of Hayakawa's prediction($68.04{\pm}3.16mm$ in male, $64.38{\pm}3.00mm$ in female) and that of vertical dimension by this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.131-141
• /
• 1989

This study was designed to investigate the fitness of stock tray in Korean adults. 107 dental students (male: 87, female: 20) who have normal occlusion and symmetric facial fom were selected. The upper and lower stock tray (Osungtray, Osung Co., Korea) fit with dental arch were selected for taking irreversible hydrocolloid impression. The author measured the thickness of impression material about two items, that is, width and length on the flange of stock tray. Several measuring points on the dental arches and palatal area were checked with Goldman Fox prove (Hu-Friedy, U.S.A.). The obtained results were as follows: 1. The width of impression material on buccal flange of upper and lower trays were narrower than any other measuring point, but the thickness of impression material on the palatal area of upper stock tray was the widest of all measuring points. 2. The length on buccal flange of lower stock tray was shorter, but the length on tray flange of lower stock tray at lingual frenum area was longer. 3. On upper dental arch, the upper extra-large tray was used in 53% of subjects, but upper small tray was not used. 4. On lower dental arch, the large tray was used in 55% of subjects. 5. There was not adequate tray on upper dental arch in 4 subjects.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.205-215
• /
• 2021

PURPOSE. The purpose of this study was to compare the accuracy of three intraoral scanner (IOS) systems with three different dental arch widths. MATERIALS AND METHODS. Three dental models with different intermolar widths (small, medium, and large) were attached to metal bars of different lengths (30, 40, and 50 mm). The bars were measured with a coordinate measuring machine and used as references. Three IOSs were compared: TRIOS 3 (TRI), True Definition (TD), and Dental Wings (DW). The relative length and angular deviation of both ends of the metal bars from the scan data set (n = 15) were calculated and analyzed. RESULTS. Comparing among scanners in terms of trueness, the relative length deviation of DW in the small (1.28%) and medium (1.08%) arches were significantly higher than TRI (0.46% and 0.48%) and TD (0.33% and 0.18%). The angular deviation of DW in the small (1.75°) and medium (1.83°) arches were also significantly greater than TRI (0.63° and 0.40°) and TD (0.55° and 0.89°). Comparing within scanner, the large arch of DW showed better accuracy than other arch sizes (P < .05). On the other hand, the larger arch of TD presented a greater tendency of angular deviation in terms of trueness. No significant differences were found in terms of trueness between the arch widths of TRI group. CONCLUSION. The different widths of the dental arches can affect the accuracy of some intraoral scanners in full arch scan.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.397-406
• /
• 2002

The purpose of this study was to clarify the palatal arch length, width and volume in the primary and permanent dentition. Samples were consisted of normal occlusion in the primary dentition(50 males and 50 females) and permanent dentition(43 males and 43 females). Their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve, loft surface and fit and horizontal plane were made for measuring the palatal arch length, width and volume(Surfacer 10.0, Imageware, U.S.A.). Correlation coefficients were calculated separately for males and females in each group(SPSS 10.0). The results were as follows : 1. Average distance from the fit plane to the points(tooth-tooth-palate) was greater in the permanent dentition than those of primary dentition. 2. Palatal volume was greater more than 3 times in the permanent dentition, especially it was greater in male compared to female with significance(p<0.05). 3. Palatal width of male was greater in the primary and permanent dentition but palatal length, only in the permanent dentition than that of female(P<0.05). 4. Correlation coefficients were statistically most significant between the palatal volume and size of posterior palatal width and total palatal length(r=0.401, r=0.450, r=0.678, r=0.654).

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.225-239
• /
• 1996

This study was carried out as a part of the semi-longitudinal study on growth and development of Korean children, with purpose of observing the growth change in arch form., 736 pairs, of study models were taken for 3 years. Mesio-distal diameter of each tooth, intercanine width, intermolar width, canine arch depth, molar arch depth and arch perimeters were measured. Afterwards, mean value and each standard deviation of each age group and each gender were obtained, and corresponding graphs were drawn. The following conclusions were obtained : 1. Mesio-distal diameters of maxillary central incisor, maxillary 2nd molar, mandibular canine, and mandibular 2nd molar showed statistical difierences between boys and girls. 2. Intercanine width shows a gradual increase until age of 11. 3. Intermolar width in maxilla shows continuous increase, and the tendency of increase is more apparent between age of 9 and 14. In mandible, various pattern was shown until age of 9, and after, a slight increase. 4. Canine arch depth shows the increasing tendency until age of 13 in maxilla and 11 in mandible. 5. Molar arch depth shows the pattern of increase until age of 10 in male and 9 in female, which is more apparent in maxilla. After age of 9 or 10,dereasing pattrn was significantly shown until age of 15 in maxilla and age of 12 in mandible. 6. Arch perimeters in maxilla and mandible showed gradual increase until age of 10, and the tendency of increase was more apparent in maxilla; however, between the age of 10 and 14, arch perimeters of maxilla and mandible showed gradual decrease which was more apparent in mandible.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.488-496
• /
• 2004

The purpose of the present study was to investigate the relationship of dental crowding to tooth size and arch dimension in Korean subjects. Two groups of dental casts with Class I molar relationship, were selected on the basis of crowding. One group, consisting of 82 pairs of study cast (29 males and 53 females), exhibited at least 7 millimeters of crowding in each arch. A second group, consisting of 82 sets of study cast (37 males and 45 females), exhibited normal occlusion with little or no crowding. Mesiodistal tooth diameters, and buccal and lingual dental arch widths were measured and compared between the crowding and normal occlusion groups. Significant differences were observed between the two groups not only in arch widths but also in tooth sizes. The results of the present study suggest that both extraction and expansion can be used as a treatment approach for the crowding cases.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• Imaging Science in Dentistry
• /
• v.48 no.3
• /
• pp.191-199
• /
• 2018

Purpose: This study classified alveolar arch forms and evaluated differences in alveolar bone thickness among arch forms in the anterior esthetic region using cone-beam computed tomography (CBCT) images. Materials and Methods: Axial views of 113 CBCT images were assessed at the level of 3 mm below the cementoenamel junction (CEJ) of the right and left canines. The root center points of teeth in the anterior esthetic region were used as reference points. Arch forms were classified according to their transverse dimensions and the intercanine width-to-depth ratio. The buccolingual alveolar bone thickness of each tooth was measured at 3 mm below the CEJ and at the mid-root level. Differences in the mean thicknesses among arch forms were analyzed. Results: Anterior maxillary arches could be classified as long narrow, short medium, long medium, and long wide arches. Significant differences in buccolingual alveolar bone thickness among the arch groups were found at both levels. The long wide arches presented the greatest bone thickness, followed by the long medium arches, while the long narrow and short medium arches were the thinnest. Conclusion: Arch forms were classified as long narrow, short medium, long medium, and long wide. The buccolingual alveolar bone thickness exhibited significant differences among the arch forms.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.155-163
• /
• 1988

The purpose of this study was to evaluate and compare frictional forces generated between orthodontic brackets and arch wires. Independent variables were chosen for study: arch wire size and shape, arch wire material, bracket width, and second-order angulation between bracket and arch wire. Kinetic frictional forces of stainless steel (0.014', 0.016', 0.018', 0.016' ${\times}$ 0.022', 0.018' ${\times}$ 0.022'), $\beta-titanium$ (0.016' ${\times}}$ 0.022') arch wires were measured on wide and junior edgewise twin brackets (0.018' ${\times}$ 0.022' slot). Instron was used to pull arch wires while $0^{\circ},\;3^{\circ},\;6^{\circ},\;or\;9^{\circ}$ angulation between and wire and bracket was given. The results were as follows: 1. The frictional force of $\beta-titanium$ wire was larger than that of stainless steel wire. 2. The frictional force was generally increased as the size of wire is increased. 3. The frictional force of rectangular wire was larger than that of round wire. 4. As second order angulation was increased, the frictional force was also increased. 5. The frictional force was larger on a wide bracket than on a junior bracket.