• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.117-119
• /
• 2003

The $Pb(Zr_{0.3}Ti_{0.7)O_3/Pb(Zr_{0.7}/Ti_{0.3})O_3$ [PZT(30/70)/(70/30)] heterolayered thin films were deposited by RF sputtering method on the $Pt/TiO_2/SiO_2/Si$ substrate. Sputter gas ratio(AR/O2) was changed form 90/10 to 50/50. The structural properties and electrical properties of the PZT(30/70)/ (70/30) heterolayered thin films were studied. The relative dielectric constant and dielectric loss at 100Hz of the PZT(30/70)/PZT(70/30) heterolayered thin films with Ar/$O_2$(80/20) ratio were about 982 and 0.036, respectively.

• 대한전자공학회논문지SD
• /
• 제38권12호
• /
• pp.8-13
• /
• 2001

$CeO_2$ 박막은 강유전체 메모리 디바이스 응용을 위한 금속-강유전체-절연체-실리콘 전계효과 트랜지스터 구조에서의 강유전체 박막과 실리콘 기판 사이의 완충층으로서 제안되어지고 있다. 본 논문에서는 $CeO_2$ 박막을 유도 결합 플라즈마를 이용하여 $Cl_2$/Ar 가스 혼합비에 따라 식각하였다. 식각 특성을 알아보기 위한 실험조건으로는 RF 전력 600 W, dc 바이어스 전압 -200 V, 반응로 압력 15 mTorr로 고정하였고 $Cl_2$($Cl_2$+Ar) 가스 혼합비를 변화시키면서 실험하였다. $Cl_2$/($Cl_2$+Ar) 가스 혼합비가 0.2일때 $CeO_2$ 박막의 식각속도는 230 ${\AA}$/min으로 가장 높았으며 또한 $YMnO_3$에 대한 $CeO_2$의 선택비는 1.83이였다. 식각된 $CeO_2$ 박막의 표면반응은 XPS와 SIMS를 통해서 분석하였다. XPS 분석 결과 $CeO_2$ 박막의 표면에 Ce와 Cl의 화학적 반응에 의해 CeCl 결합이 존재함을 확인하였고, 또한 SIMS 분석 결과로 CeCl 결합을 확인하였다. $CeO_2$ 박막의 식각은 Cl 라디칼의 화학적 반응의 도움을 받으며 Ce 원자는 Cl과 반응을 하여 CeCl과 같은 혼합물로 $CeO_2$ 박막 표면에 존재하며 이들 CeCl 혼합물은 Ar 이온들의 충격에 의해 물리적으로 식각 되어진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1586-1588
• /
• 2003

The Pb$(Zr{_{0.7}}Ti_{0.3})O_3$[PZT(70/30)] thin films were fabricated on Pt/$TiO_2/SiO_2$/Si substrate by RF sputtering method. The effects of Ar/$O_2$ ratio on the structural and dielectric properties of PZT thin fillms were investigated. In the case of the PZT thin films deposited with condition of 50/50$(Ar/O_2) $ ratio, the grain of the PZT thin films were fine and uniform. Increasing of $O_2$ ratio, the dielectric constant was increased. In this case the dielectirc constant and dielectric loss of PZT thin fims were about 627 and 0.010, respectively.

• 마이크로전자및패키징학회지
• /
• 제8권2호
• /
• pp.31-36
• /
• 2001

Plasma Polymerization를 이용하여 Teflon-like 불화 유기 박막을 Si, $SiO_2$, Al, TEOS 위에 증착하였다. Difluoromethane $(CH_2F_2$)에 Ar, $O_2$, 그리고 $CH_4$를 첨가하여 첨가 가스에 따른 불화 유기 박막의 특성을 평가하였다. 각각의 첨가가스에 대하여 압력, 온도, 그리고 첨가가스의 비율을 변화시켜 박막을 증착하여 정접촉각 통한 표면의 친수성 (hydrophilicity)과 소수성(hydrophobicity) 정도를 관찰하였다. Ar을 첨가한 경우 Ar 첨가량과 power의 증가에 따라 정접촉각의 감소를 관찰하였다. 그러나 증착압력이 증가함에 따라 정접촉각이 증가하였다. Ar 첨가시 2 Torr이상의 증착압력에서 분말형태의 초소수성 불화 유기박막을 얻을 수 있었다. $O_2$를 첨가한 경우, $O_2$의 첨가량과 증착압력이 증가함에 따라 정접촉각은 감소하였다. 약 100W까지의 power에서는 정접촉각은 일정하였지만 power의 증가에 따라 정접촉각은 감소하여 200W에서는 천수성표면을 얻을 수 있었다. $CH_4$를 첨가하여 불화유기박막을 증착하였을 경우 $CH_4/CH_2F_2$비율이 5까지 급격한 증가를 나타내었고, 비율이 5이상인 경우에서는 일정한 정접촉각을 나타내었다. 화학기상증착에 의해 제조된 박막보다 plasma polymerization으로 제작된 불화유기박막이 히스테리시스(hysteresis)가 낮은 불화유기박막을 형성하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.25.1-28
• /
• 2000

In this study, $Y_2O_3$ thin films were etched with inductively coupled plasma (ICP). The etch rate of $Y_2O_3$ , and the selectivity of $Y_2O_3$ to YMnO$_3$were investigated by varying $Cl_2$/($Cl_2$+Ar) gas mixing ratio. The maximum etch rate of $Y_2O_3$ , and the selectivity of $Y_2O_3$ to YMnO$_3$ were 302/min, and 2.4 at $Cl_2$/($Cl_2$+Ar) gas mixing ratio of 0.2 repetitively. In x-ray photoelectron spectroscopy (XPS) analysis, $Y_2O_3$ thin film was dominantly etched by Ar ion bombardment, and was assisted by chemical reaction of Cl radical. These results were confirmed by secondary ion mass spectroscopy(SIMS) analysis. YCl, and $YC_3$ existed at 126.03 a.m.u, and 192.3 a.m.u, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.25-28
• /
• 2000

In this study, $Y_2$O$_3$ thin films were etched with inductively coupled plasma (ICP). The etch rate of $Y_2$O$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were investigated by varying Cl$_2$/(Cl$_2$+Ar) gas mixing ratio. The maximum etch rate of $Y_2$O$_3$, and the selectivity Of $Y_2$O$_3$ to YMnO$_3$ were 302/min, and 2.4 at Cl$_2$/(Cl$_2$+Ar) gas mixing ratio of 0.2 repectively. In x-ray photoelectron spectroscopy (XPS) analysis, $Y_2$O$_3$ thin film was dominantly etched by Ar ion bombardment, and was assisted by chemical reaction of Cl radical. These results were confirmed by secondary ion mass spectroscopy(SIMS) analysis. YCI, and YCl$_3$ existed at 126.03 a.m.u, and 192.3 a.m.u, respectively

• 한국광학회지
• /
• 제13권3호
• /
• pp.204-208
• /
• 2002

본 논문에서는 ITO박막의 면저항과 투과율의 최적 상태를 얻기 위해 이온총에 주입된 Ar:O$_2$혼합비율과 이온빔 발산 각안으로 도입된 $O_2$에 따른 변화를 연구하였다. 기판은 이온빔 발산 각 외부에 위치시켰고, 박막은 상온에서 전자빔으로 증발시킨 ITO와 이온 mixing하여 제작하였다. XRD 측정 결과, 상온에서 제작된 ITO 박막은 모두 비정질이었다. 3$\times$$10^{-5}$ Torr의 산소 분위기에서 이온총에 주입된 Ar:O$_2$비율이 40:60일 때 85%로 가장 높은 투과율을 보였고, 1$\times$$10^{-5}$ Torr에서 Ar:O$_2$비율이 40:60일 때 132 $\Omega$/$\square$ 의 가장 낮은 면 저항을 보였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.29-32
• /
• 2000

Cerium oxide thin film has been proposed as a buffer layer between the ferroelectric film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS ) structures for ferroelectric random access memory (FRAM) applications. In this study, CeO$_2$thin films were etched with Cl$_2$/Ar gas combination in an inductively coupled plasma (ICP). The highest etch rate of CeO$_2$film is 230 $\AA$/min at Cl$_2$/(Cl$_2$+Ar) gas mixing ratio of 0.2. This result confirms that CeO$_2$thin film is dominantly etched by Ar ions bombardment and is assisted by chemical reaction of Cl radicals. The selectivity of CeO$_2$to YMnO$_3$was 1.83. As a XPS analysis, the surface of etched CeO$_2$thin films was existed in Ce-Cl bond by chemical reaction between Ce and Cl. The results of XPS analysis were confirmed by SIMS analysis. The existence of Ce-Cl bonding was proven at 176.15 (a.m.u.).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.29-32
• /
• 2000

Cerium oxide thin film has been proposed as a buffer layer between the ferroelectric film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS ) structures for ferroelectric random access memory (FRAM) applications. In this study, CeO$_2$ thin films were etched with Cl$_2$/Ar gas combination in an inductively coupled plasma (ICP). The highest etch rate of CeO$_2$ film is 230 $\AA$/min at Cl$_2$/(Cl$_2$+Ar) gas mixing ratio of 0.2. This result confirms that CeO$_2$ thin film is dominantly etched by Ar ions bombardment and is assisted by chemical reaction of Cl radicals. The selectivity of CeO$_2$ to YMnO$_3$ was 1.83. As a XPS analysis, the surface of etched CeO$_2$ thin films was existed in Ce-Cl bond by chemical reaction between Ce and Cl. The results of XPS analysis were confirmed by SIMS analysis. The existence of Ce-Cl bonding was proven at 176.15 (a.m.u.).

• 한국재료학회지
• /
• 제12권6호
• /
• pp.452-457
• /
• 2002

Titanium oxide films were prepared by RF reactive magnetron sputtering. The effect of sputtering conditions on structural and optical properties was investigated systemically as a function of sputtering pressure(5~20 mTorr) and $O_2/Ar$ flow ratio(0.08~0.4). The results of the X-ray diffraction showed that all films had only the anatase $TiO_2$ phase. At low sputtering pressure and $O_2/Ar$ flow ratio, the films had preferred orientations along [101] and [200] directions. As the sputtering pressure and $O_2/Ar$ flow ratio increased, the intensity of the 101 and 200 diffraction peaks decreased gradually. The microstructure of the sputtered films showed the fine grain size (20nm~50nm) and columnar microcrystals perpendicular to the substrate. With increasing the sputtering pressure and decreasing $O_2/Ar$ flow ratio, the sputtered films showed the more porous columnar structure. XPS analysis showed that stoichiometric $TiO_2$ films were deposited at 7 mTorr sputtering pressure and 0.2 $O_2/Ar$ flow ratio. The results of the X-ray diffraction showed that all films had only the anatase $TiO_2$ phase. Ellipsometeric analysis showed that the refractive index increased from 2.32 to 2.46 as the sputtering pressure decreased. The packing density calculated using the refractive index varied from 0.923 to 0.976, indicating that $TiO_2$films became denser as the sputtering pressure decreased.