• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.473-478
• /
• 2000

The TiO2 powder with the values of the large specific surface area more than 150$m^2$/g has been prepared with the homogeneous precipitation process below 5$0^{\circ}C$ and its formation mechanism was investigated using the SEM, TEM and Raman Spectroscopy. With the spontaneous hydrolysis of aqueous TiOCl2 solutions, all the precipitates were fully and homogeneously crystallized with the rutile TiO2 phase simply by heating, which as transformed to the anatase TiO2 phase as increasing the addition of SO42- ions to the aqueous TiOCl2 solution. The precipitates were formed with spherical secondary particles which consisted of acicular, spherical and mixed primary particles corresponding to the rutile, anatase and mixed phases, respectively. It can be thought that the formation and phase determination of crystalline TiO2 powders even at ambient temperature would be related with the existence of the capillary force. This force might be varied depending on the shape change of the primary particles.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.96-104
• /
• 1998

It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5％ of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5％ of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0％ in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85％ of glucose was added selectively within inner aqueous phase.

• Korean Journal of Microbiology
• /
• v.46 no.3
• /
• pp.291-295
• /
• 2010

A novel bacteriocin produced by Streptococcus parauberis Z49 strain was characterized and efficiently extracted from fermented cultures by use of aqueous two-phase systems. The nisin-like bacteriocin, which was active even after a heat treatment at $121^{\circ}C$ for 15 min and in the broad pH range from 2 to 12, showed inhibition of bacterial growth of Micrococcus luteus, Lactobacillus spp., Lactobacillus fermentum, Enterococcus faecium, Listereia monocytogenes, and Pseudomonas fluorescens. Optimal conditions of PEG 600/$Na_2SO_4$ aqueous two-phase systems for the simple and rapid extraction of a novel bacteriocin were determined to be PEG 600 15%, $Na_2SO_4$ 30%, and NaCl 8%, where the bacteriocin was concentrated in PEG layer.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.4
• /
• pp.1-7
• /
• 2021

The removal of PCBs (Polychlorinated biphenyls) in aqueous phase was investigated in the ultraviolet (UV) process, ultrasonics (US) process and ultraviolet/ultrasonic (UV/US) process using PCB No.7 and Aroclor 1260. For PCB No.7 relatively high removal efficiency over 90% was obtained during 20 min in the UV process and UV/US process. On the other hand, lower removal efficiency of 50 - 70% was achieved for it consisted of individual congeners of PCBs containing 3~8 of chlorine atom. It was found that the dechlorination reaction (the photolytic cleavage of C-Cl bond) was considered as a main removal mechanism in the UV process while PCBs were removed by cavitation-induced radical reaction in the US process. No significant dechlorination occurred in the US process. Consequently, it was suggested that the UV process or UV/US process was applicable for the removal of PCBs in aqueous phase in terms of the removal efficiency and operation time. In addition, the application of saturating gas such as Ar and Air could be considered to control redox condition and enhance the severity of acoustic cavitation for the removal of PCBs.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2669-2674
• /
• 2012

Crown ether is one of well-known host molecules and able to selectively sequester metal cation. We employed M06-2X density functional theory with IEFPCM and SMD continuum solvation models to study selectivity of dibenzo-18-crown-6-ether (DB18C6) for alkaline earth dications, $Ba^{2+}$, $Sr^{2+}$, $Ca^{2+}$, and $Mg^{2+}$ in the gas phase and in aqueous solution. $Mg^{2+}$ showed predominantly strong binding affinity in the gas phase because of strong polarization of CO bonds by cation. In aqueous solution, binding free energy differences became smaller among these dications. However, $Mg^{2+}$ had the best binding, being incompatible with experimental observations in aqueous solution. The enthalpies of the dication exchange reaction between DB18C6 and water cluster molecules were computed as another estimation of selectivity in aqueous solution. These results also demonstrated that $Mg^{2+}$ bound to DB18C6 better than $Ba^{2+}$. We speculated that the species determining selectivity in water could be 2:1 complexes of two DB18C6s and one dication.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.37-42
• /
• 2011

The rheological properties of the aqueous solution of scleroglucan industrially produced by Sclerotium rolfsii at concentrations ranging from 0.1 % to 2 % (w/w) were determined by using brookfield viscometer and rheometer. Gel matrices of scleroglucans were stable over a wide range of pH and ionic strength in the aqueous medium. In the oil dispersion with phytosqualane in oil phase and three kinds of thickening agent in aqueous phase, scleroglucan showed the highest dispersion properties. The synergistic effect between scleroglucan and locust bean gum was also examined. The highest viscosity was obtained for the solution mixture at scleroglucan/locust bean gum weight ratio of 5 : 5. The results of this study suggest the potential of scleroglucan as thickner for a wide variety of cosmetic formulations.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.555-561
• /
• 2008

In air stripping of ammonia from the aqueous solution, a new removal model was presented considering the equilibrium principles for the ammonia in aqueous solution and between the aqueous and air phase. The effects of pH, temperature and airflow rate on the ammonia removal were evaluated with the model. In addition, the saturation degree of ammonia in air was defined and used to evaluate the effect of each experimental factor on the removal rate. As pH (8.9 to 11.9) or temperature (20 to 50 oC) was increased, the overall removal rate constants in all cases were appeared to be increased. Our presented model shows that the degrees of saturation were about the same (0.45) in all cases when the airflow condition remains the same. This result indicates that the effect of pH and temperature were directly taken into consideration in the model equation. As the airflow increases, the overall removal rate constants were increased in all cases as expected. However, the saturation degree was exponentially decreased with increasing the airflow rate in the air phase (or above-surface) aeration. In the subsurface aeration the saturation degree remains a constant value of 0.65 even though the airflow rate was increased. These results indicate that the degree of saturation is affected mainly by the turbulence of the aqueous solution and remains the same above a certain airflow rate.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1029-1035
• /
• 2014

The protolytic dissociation process of hydrochloric acid (HCl) and hydrofluoric acid (HF) is studied using the B3LYP and MP2 methods with the 6-311+G(d,p) basis set in the gas phase and in aqueous solution. To study the phenomena in detail, discrete and discrete/continuum models were applied by placing water molecules in various positions around the acid. The dissociation process was studied using the thermodynamic cycle involving the structures optimized both in the gas phase and in aqueous solution and was analyzed with two key energy factors, relaxation free energy (${\Delta}G_{Rex(g)}$) and solvation free energy (${\Delta}G_s$). Based on the results, we could understand the dissociation mechanism and wish to propose the best way to study acid dissociation process using the CPCM methodology in aqueous solution.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.5
• /
• pp.360-369
• /
• 2016

Background: Cylindrocarpon destructans (Zins) Scholten is an important pathogenic fungus that causes ginseng root rot in many ginseng growing areas in China. Although C. destructans have been studied worldwide, research on its chemotaxis towards ginseng (Panax ginseng C. A. Meyer) root exudates in the rhizosphere remains limited. Methods and Results: In this study, we collected ginseng root exudates with three different polarities from three-year-old ginseng roots, and performed chemotaxis and spore germination assays to investigate the ability of these exudates to induce the response in C. destructans. The results showed that, compared with other conditions, when C. destructans cultivated at $20^{\circ}C$ and a pH of 6 exhibited a strong positive chemotactic response toward $2mg/{\ell}$ aqueous phase, $20mg/{\ell}$ butanol phase, and $0.2mg/{\ell}$ petroleum ether from ginseng root exudates, the chemotactic moving indexes were 0.1581, 0.1638 and 0.1441, respectively. In addition, the spore germination rate with optimal chemotactic parameters were 48%, 53%, and 41% in the aqueous phase, butanol phase and petroleum ether groups, respectiviely, which were significantly higher than that in the control group (23%) (p < 0.05). The mycelial growth rate with optimal chemotactic parameters increased with culture time, and the maximum growth rates in the aqueous phase, butanol phase and petroleum ether groups were 0.425, 0.406 and 0.364 respectively, on the 4th day. The optimal chemotactic parameters were $39.73mg/50mg/{\ell}$, $48.93mg/50mg/{\ell}$, and $31.43mg/50mg/{\ell}$, in aqueous phase, butanol phase and petroleum ether respectively, from ginseng root exudates, compared with $5.5mg/50mg/{\ell}$, in the control group. Conclusions: The present study revealed that certain ginseng root exudates containing chemical attractants act as nutritional sources or signals for C. destructans and support its colonization of ginseng roots.