• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1407-1413
• /
• 2019

In this paper, we assume that another transmitter can transmit its data signal in the same frequency band in order to maximize the frequency efficiency of non-orthogonal multiple access(NOMA) systems. We also focus on the improvement in fairness performance of receiver's data rates, not the maximization of sum data rate for NOMA systems. Thus, in this paper, we propose a power allocation scheme to enhance the fairness performance of average data rates of receivers considering the NOMA systems in the presence of interference. Assuming Rayleigh fading channels, the average data rates of receivers are defined, and the power allocation coefficients to improve the data-rate fairness are derived by using high signal-to-noise power ratio approximation. In addition, through simulations, it is shown that the proposed power allocation scheme can improve the data-rate fairness in the NOMA system with interference.

• Analytical Science and Technology
• /
• v.35 no.5
• /
• pp.212-217
• /
• 2022

In this study, ozone (O₃) samples were prepared for investigating the heterogeneous reactions between O₃ and tropospheric aerosols and were characterized by spectroscopic methods. O₃ generated from an ozone generator was purified by selective adsorption on refrigerated silica gel, followed by transfer to a sample bulb. The amount of UV light (λ = 256 nm) absorbed by O₃ was measured as a function of time at two different temperatures (room temperature and 50 ℃) and under different irradiation conditions. A correlation plot of 1/[O₃] versus time showed that O₃ decomposition follows the 2^nd order reaction rate under a steady-state approximation. The initial concentration of O₃, observed rate constants (k_obs), and the half-life of O₃ in the sample stored at room temperature were determined to be 2.74 [±0.14] × 10¹⁶ molecules·cm^-3, 4.47 [±0.64] × 10^-23 molecules^-1·cm³·s^-1, and 9.5 [±1.4] days, respectively. The evaluation of O₃ stability under various conditions indicated that special care should be taken to prevent the exposure of the O₃ samples to hightemperature environment and/or UV radiation. This study established a protocol for the preparation of highly purified O₃ samples and confirmed that the O₃ samples can be stored for a day after preparation for further experiments.

• Nutrition Research and Practice
• /
• v.16 no.6
• /
• pp.765-774
• /
• 2022

BACKGROUND/OBJECTİVES: It is important to determine Dysfunctional eating behaviors such as dietary restraint and overeating tendencies in order to provide weight management and acquire the right habits in children. The purpose of this study was to test the reliability and validity of Dutch Eating Behaviour Questionnaire Children (DEBQ-C) with Turkish preadolescent children. MATERIALS/METHODS: This research included 440 preadolescents (9.3 ± 6.9 years and 235 girls, 205 boys). The instrument is divided into three subscales, each with 20 items. Emotional eating, restrained eating, and external eating are the three subscales. Confirmatory factor analysis (CFA) was used to assess the construct validity of the Turkish version of the DEBQ-C, and Cronbach α values were computed to evaluate the subscale reliabilities. There were 20 observable variables and three latent variables in the hypothesized model. RESULTS: Fit indices for the hypothesized model were good (×2/degree of freedom = 1.96; root mean square error of approximation = 0.05; comparative fit index = 0.95; goodness of fit index = 0.93). These findings revealed that the Turkish version of the DEBQ-C has a factor structure that was identical to the three-factor structure of the original scale. The Turkish version of the DEBQ-C subscales has internal consistency coefficients ranging from 0.72 (external eating) to 0.86. (emotional eating). CONCLUSIONS: The DEBQ-C Turkish version is a viable and reliable tool for measuring overeating tendencies in Turkish preadolescents, according to the findings.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.55-64
• /
• 2023

Gas turbine engines are widely used as prime movers of generator and propulsion system in warships. This study addresses the problem of designing a DS-based PID controller for speed control of the LM-2500 gas turbine engine used for propulsion in warships. To this end, we first derive a dynamic model of the LM-2500 using actual sea trail data. Next, the PRC (process reaction curve) method is used to approximate the first-order plus time delay (FOPTD) model, and the DS-based PID controller design technique is proposed according to approximation of the time delay term. The proposed controller conducts set-point tracking simulation using MATLAB (2016b), and evaluates and compares the performance index with the existing control methods. As a result of simulation at each operating point, the proposed controller showed the smallest in %OS, which means that the rpm does not change rapidly. In addition, IAE and IAC were also the smallest, showing the best result in error performance and controller effort.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.439-446
• /
• 2006

In the present study, we applied wavelet transform to decompose the hydro-meteorological data such as precipitation and temperature into the components with different return periods with a primary objective for extraction of nonlinear dynamical component. For the transform, we used the Daubechies wavelet of order 9 ('db9') as a basis function. Also, we applied the correlation dimension analysis to determine whether or not the detail and approximation components at the respective decomposition stage with the increasing of scale in the wavelet transform reveal the nonlinear dynamical characteristics. In other words, we proposed the combined use of the wavelet transform and the correlation dimension analysis as methodology to extract the nonlinear dynamical component from the hydro-meteorological data. The derived result has shown the method proposed in the present study is suitable for the segregation and extraction of the nonlinear dynamical component which is, in general, difficult to reveal by using the raw data.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.113-127
• /
• 2022

The undrained shear strength of soil is considered one of the engineering parameters of utmost significance in geotechnical design methods. In-situ experiments like cone penetration tests (CPT) have been used in the last several years to estimate the undrained shear strength depending on the characteristics of the soil. Nevertheless, the majority of these techniques rely on correlation presumptions, which may lead to uneven accuracy. This research's general aim is to extend a new united soft computing model, which is a combination of random forest (RF) with grasshopper optimization algorithm (GOA) to the pile set-up parameters' better approximation from CPT, based on two different types of data as inputs. Data type 1 contains pile parameters, and data type 2 consists of soil properties. The contribution of this article is that hybrid GOA - RF for the first time, was suggested to forecast the pile set-up parameter from CPT. In order to do this, CPT data and related bore log data were gathered from 70 various locations across Louisiana. With an R² greater than 0.9098, which denotes the permissible relationship between measured and anticipated values, the results demonstrated that both models perform well in forecasting the set-up parameter. It is comprehensible that, in the training and testing step, the model with data type 2 has finer capability than the model using data type 1, with R² and RMSE are 0.9272 and 0.0305 for the training step and 0.9182 and 0.0415 for the testing step. All in all, the models' results depict that the A parameter could be forecasted with adequate precision from the CPT data with the usage of hybrid GOA - RF models. However, the RF model with soil features as input parameters results in a finer commentary of pile set-up parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.339-345
• /
• 2006

We suggest new 2D two-way Parabolic equation algorithm for multiple scattering. Our method is based on the successive performance of the single scattering approach. First. as the single scattering algorithm, the reflected and transmitted fields are calculated at the vertical interface of a range independent sector. Then. the reflected field is saved and the transmitted field Propagated to the next vertical interface with the split-step Pade method. After one step ends, the same Process is repeatedly performed with the change of the Propagation direction until the reflected field at the vertical interface is close to zero. Final incoming and outgoing fields are obtained as the sum of the wave fields obtained for each step. Our algorithm is relatively simple for the numerical implementation and requires less computational resources than the existing algorithm for multiple scattering

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.119-128
• /
• 2008

This paper analyzes the relationship between two representative statistical methods for bandwidth extension (BWE): Gaussian Mixture Model (GMM) and Hidden Markov Model (HMM) ones, and compares their performances. The HMM method is a memory-based system which was developed to take advantage of the inter-frame dependency of speech signals. Therefore, it could be expected to estimate better the transitional information of the original spectra from frame to frame. To verify it, a dynamic measure that is an approximation of the 1st-order derivative of spectral function over time was introduced in addition to a static measure. The comparison result shows that the two methods are similar in the static measure, while, in the dynamic measure, the HMM method outperforms explicitly the GMM one. Moreover, this difference increases in proportion to the number of states of HMM model. This indicates that the HMM method would be more appropriate at least for the 'blind BWE' problem. On the other hand, nevertheless, the GMM method could be treated as a preferable alternative of the HMM one in some applications where the static performance and algorithm complexity are critical.

• KDI Journal of Economic Policy
• /
• v.34 no.1
• /
• pp.135-168
• /
• 2012

This study analyzes ways to detect protest responses (hereafter, PR zero-bid) in the contingent valuation method (CVM). In order to distinguish PR zero-bids from true zero-bids (non-PR zero bids), this study adopts the concept of the implicit willingness to pay employing the Hicksian compensating surplus and the Taylor's 1st order approximation. When a respondent proposes a zero-bid (i.e., WTP=0) and chooses a PR filtering item to indicate that her implicit WTP is not necessary zero, her response is identified as a PR zero bid. PR filtering items falling into the PR zero bids category include the uncertainty of information, distrust in the government and project achievement, disagreement to project plans, discontent with the fairness of public works and their payment method and animosity against the CVM itself. The empirical analysis shows that PR zero bids take place systematically in particular respondent groups: respondents who have never used similar facilities before nor plans to use the facility provided by the public project, the employed, and low income groups. In conclusion, the study suggests that a CVM questionnaire needs to be designed carefully to minimize problems associated with PR zero bids and the potential risks of having sample selection bias should be concerned.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.374-384
• /
• 2012

Utilizing artificial noise (AN) is a good means to guarantee security against eavesdropping in a multi-inputmulti-output system, where the AN is designed to lie in the null space of the legitimate receiver's channel direction information (CDI). However, imperfect CDI will lead to noise leakage at the legitimate receiver and cause significant loss in the achievable secrecy rate. In this paper, we consider a delayed feedback system, and investigate the impact of delayed CDI on security by using a transmit beamforming and AN scheme. By exploiting the Gauss-Markov fading spectrum to model the feedback delay, we derive a closed-form expression of the upper bound on the secrecy rate loss, where $N_t$ = 2. For a moderate number of antennas where $N_t$ > 2, two special cases, based on the first-order statistics of the noise leakage and large number theory, are explored to approximate the respective upper bounds. In addition, to maintain a constant signal-to-interferenceplus-noise ratio degradation, we analyze the corresponding delay constraint. Furthermore, based on the obtained closed-form expression of the lower bound on the achievable secrecy rate, we investigate an optimal power allocation strategy between the information signal and the AN. The analytical and numerical results obtained based on first-order statistics can be regarded as a good approximation of the capacity that can be achieved at the legitimate receiver with a certain number of antennas, $N_t$. In addition, for a given delay, we show that optimal power allocation is not sensitive to the number of antennas in a high signal-to-noise ratio regime. The simulation results further indicate that the achievable secrecy rate with optimal power allocation can be improved significantly as compared to that with fixed power allocation. In addition, as the delay increases, the ratio of power allocated to the AN should be decreased to reduce the secrecy rate degradation.