• 무역상무연구
• /
• 제37권
• /
• pp.89-106
• /
• 2008

Since the implementation of International Standard Banking Practice(ISBP) in 2003, ICC Publication No. 645 has become an invaluable help to the documentary credit practitioners including banks, companies, transportation and insurance companies etc. However, with the approval of UCP 600 in October 2006, it has become necessary to provide an updated version of the ISBP. It should be emphasized that this ISBP is an updated version as opposed to a revision of ICC Publication No. 645. The new ISBP has been implemented concurrently with UCP 600 since July 1st, 2007. The first necessity was to replace UCP 500 article numbers with those of UCP 600. Second, where it was felt proper, the contents of some paragraphs that appear in ICC Publication No. 645 and that have been covered in UCP 600 have been removed from the updated version of the ISBP. This explains the reduction in the number of paragraphs from 200 to 185. The international standard banking practices documented in the new ISBP are consistent with UCP 600. This ISBP does not amend UCP 600. It explains how the practices articulated in UCP 600 are applied by documentary practitioners. The new ISBP and the UCP 600 should be read in their entirety and not in isolation. It should be kept in mind that any terms in a documentary credit which modifies or excludes the applicability of a provision of UCP 600 may also have an impact on the international standard banking practices. Consequently, when parties concerned must take into account any terms in a documentary credit that expressly modifies or excludes a rule contained in UCP 600.

• 재활복지공학회논문지
• /
• 제3권1호
• /
• pp.41-47
• /
• 2009

본 논문에서는 중추신경계나 대뇌피질의 운동 및 감각기능을 검사하는 근전도계 및 유발성응답기의 안전 요구사항 및 시헙방법을 기술한다. 국제 기준에 부합화하는 안전 요구사항을 설정하고, 국제 표준에 따른 시험방법 및 표준 시험절차서를 제시하였다. 그러나 장비의 개별 성능 요구사항은 특정하지 않고, 제조사에서 제시하는 성능이나 출력이 가능하도록 규정하였다. 시중에 유통되고 있는 근전도계 장비를 이용하여 제시된 시험방법에 대한 유효성을 확인하였다. 이 연구의 결과는 식품의약품안전청에서 의료기기 인허가시 적용되는 기준규격으로서 사용될 수 있을 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.383-390
• /
• 2010

This study is currently giving priority to developing the ship's ballast water treatment system using ozone (Ozone BWTS). The Ozone BWTS was tested in a full scale land-based mobile barge to evaluate performance according to the IMO G8 Guidelines. Test cycles using the mobile-barge were conducted in seawater and brackish water in the vicinity of the Port of Busan and Nakdong River, Republic of Korea. All tests were conducted according to the requirements of the G8 Guidelines. Test results show that the Ozone BWTS meets the Ballast Water Performance Standard contained in Regulation D-2 of the IMO Ballast Water Management Convention, as well as all of the operational, safety, and environmental testing requirements of the G8 Guidelines, as required for type approval of IMO. The study results show that the Ozone BWTS is capable of meeting the Ballast Water Performance Standard under Regulation D-2 of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments, and also the more stringent standards being proposed under US legislation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.212-217
• /
• 2000

This first ISO/CD 7475 is a proposed revision of ISO 7475-1984, which specifies requirements for enclosures and other safety measures used to minimize mechanical hazards produced by the rotor in the measuring station of centrifugal (rotational) balancing machines. The hazards are associated with the operation of balancing machines under a variety of rotor and balancing conditions. This standard defines different classes of protection that enclosures and other protective features have to provide and describes the limits of applicability for each class of protection. At the meeting held at AFNOR in Paris in June 1999, ISO/TC 108/SC1/WG 12 agreed to prepare a first ISO Committee Draft (CD) and circulate to the member bodies for vote and comment by 3 March 2000 since publication as an International Standard requires approval by at least 75% of the member bodies casting a vote. The results of the ballot on this first ISO/CD 7475 was positive so that it will be prepared as an ISO/DIS (ISO/DIS 7475) and discussed in a meeting of ISO/TC 108/SC1 at BSI, London, u.K. in March 2000. Contents of this ISO/CD 7475 with some member comments accounted is briefly described in what follows.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.1-9
• /
• 2008

This report contains the results of structural analysis for the verification of the optimum offset range on the top of T-Bar with stiffener and BKT using at DSME Offset range as $6.0{\sim}10.0mm$ based on the 3-D FE analysis and experimental results of angie type stiffener as described in Annex 1 has been used as yard standard over ten (10) years under all Classification approval. Recently, Owner and Class have requested the confirmation for the misalignment based on the Yard's Standard so that a couple of locations for LNGC and LPGC has been investigated the structural strength by FE method using the offset ranges from 0.0 to 18.0 mm.

• 한국임상약학회지
• /
• 제26권2호
• /
• pp.137-149
• /
• 2016

Objective: Online pharmacies were introduced in some countries such as United States of America or Canada. They can provide benefits to consumer because they can buy and take conveniently drugs without limitation of location or time. In Korea, online pharmacies are illegal and only pharmacists can sell drugs to consumers or patients. Therefore, we investigated the knowledge of online pharmacy and the possible problem in Korea to survey pharmacists. Methods: We developed questionnaire based on previous articles about online pharmacy and surveyed nation-wide pharmacists by mail or e-mail. The data was analyzed by SPSS and Microsoft Excel. P-values less than 0.05 were statistically significant. Results: 175 pharmacists involved in this study. About introduction of online pharmacies, 53.1% were opposition while 10.3% were approval and 36.6% were conditional. Although online pharmacies were introduced, 46.3% pharmacists do not have a plan to start online pharmacy. However, the approval and tends about starting online pharmacies were higher in younger pharmacists (20s, 30s) (p < 0.05). The criteria of permission about opening online pharmacies were 100% pharmacist license regardless of holding off-line pharmacy. 53.7% pharmacists responded education about taking medication is impossible. When online pharmacies are introduced, 65.1% pharmacists responded traditional pharmacies are affected negatively. Pharmacists concerned that the competition with large-sized distribution corporations, reduced reliance between pharmacists and patients, illegal transaction of counterfeit drugs, increased misuse of drugs. Conclusion: These results showed that Korea pharmacists have negative standard on online pharmacies. Therefore it is required to be more cautious before introducing online pharmacy and it need strict watching system and continuous education and study for safety after introducing online pharmacy.

• 인터넷정보학회논문지
• /
• 제15권2호
• /
• pp.129-142
• /
• 2014

최근 지능형 전력망 사업에서 가장 큰 이슈로 부각되고 있는 것이 지능형 전력량계의 보안과 미래 기능을 만족하기 위한 SW 업그레이드 기능이다. 그러나, 일반 기기와 달리 법정계량기에 속하는 지능형 전력량계는 공정한 상거래기반의 확립을 위해 그 기능 및 변경이 법으로 엄격히 제한되고 있다. 따라서 본 논문에서는 지능형 전력량계의 SW업그레이드와 관련된 요구사항을 분석하여, 법정 계량기 요건에 준한 미래 지능형전력량계의 기능 개선을 위해 배포되는 SW이미지에 대한 인증을 통한 배포방안을 제시하고, 스마트카드를 이용한 지능형 전력량계의 보안기능을 구현하는 방법을 제안한다.

• 분석과 대안
• /
• 제4권2호
• /
• pp.103-132
• /
• 2020

The purpose of this study is to observe whether intergenerational differences exist in support among major Korean political parties and, if so, how they exist, based on the results of the survey conducted nationwide. To achieve the purpose of the study, a questionnaire was prepared based on conjoint analysis, and the collected data was analyzed by applying a random parameter logit model. The main results of model analysis are summarized as follows. First, among the policy variables, statistically significant results were observed in the generation of 20s and 30s for the education variable. It was found that both 20s and 30s aimed for equal education at a higher level than other generations. Especially, the highest intensity aim for equal education culture was observed in the 20s. Second, the coefficients of major political parties were observed with a high level of statistical significance. This appears to be a result suggesting that voters decide on their voting behavior through thorough policy comparisons in addition to comprehensive consideration on various current issues. Third, a clear support for conservative parties was observed in the generation of 20s. A clear and intense distribution of preference for political parties classified as conservatives was observed in the 20s generation, which can be said to be mainly college students. This seems to be a profound founding related to the issue of "conservatization of the 20s," which has recently become a hot topic in Korean society. Fourth, a high level of support for progressive parties was observed in the 30s and 40s. The Justice Party can be classified as a minority party in the National Assembly House as of January 2019. Nevertheless, it was maintained at a relatively high level in national recognition, and it is presumed that the background was high level of support from the 30s and 40s. Fifth, a large level of standard deviation was observed in the preference for conservative parties in the 50s. This means that some respondents who are in their 50s or older strongly support the Liberty Korea Party, and some respondents in the same generation strongly disapprove it. Due to this countervailing power, it seems that the average support level for the Liberal Korean Party is low in the generations of 50s and older.?

• 한국항공우주학회지
• /
• 제50권9호
• /
• pp.647-655
• /
• 2022

러시아 정부는 세계 3위의 민간항공기 생산 강국을 목표로 민간항공기 제작기술 및 첨단 소재 확보를 위해 외국과 생산 제휴 등 전략적 협력을 확대하는 중이다. 또한 러시아 정부는 항공기 제작산업의 발전을 지원하고 항공 인증 조직을 개편하여 체계적인 항공안전 확보를 추구하고 항공제품 수출을 위한 국제협력과 인증활동에 많은 노력을 기울이고 있다. 국가 간에 민간항공기 안전 및 인증분야의 협력체계를 구축하기 위해서는 전반적인 인증시스템에 대한 상호간의 이해와 신뢰를 구축하는 과정이 요구된다. 따라서 본 연구에서 러시아의 항공기 인증조직, 법령체계, 인증절차를 분석하여 러시아의 항공기 인증체계에 대한 이해를 돕고자 하였다.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.821-827
• /
• 2023

본 연구에서는 국내 및 미국의 항공기 기술기준과 기술표준품 표준서를 분석하여 수송류 항공기용 금속계 제동패드의 비행시험 인증을 위한 합치성 증명 시 요구되는 다이나모시험절차를 도출하였다. 제동장치의 설계개조는 중대한 변경으로 분류되어 부가형식증명 및 부품등제작증명이 동시에 요구된다. 다이나모시험 항목은 미국의 제동장치 기술표준품 표준서인 TSO-C135a 규정에 따라 비행시험의 적합성을 판단하는 기준으로 비행시험 시 요구되는 주요 시험항목 중 설계착륙-정지 시험, 가속-정지 시험 및 최대 하중상태의 착륙-정지 시험을 선정하였다. 다이나모시험 조건은 항공기 제조사가 제공하는 주요 사양에 따라 정해지며, 제동패드의 조건, 감속도 및 시험횟수 등은 TSO-C135a 규정에 따라 정의하였다.