• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.513-521
• /
• 2006

Many studies have been conducted on the high tension bolt friction connection in the view of the field practice. Those effort, however, unfortunately have not been appropriately applied in the design specifications. Recently, particularly for steel bridges, rationalization of design takes greater attention from designers and hence, demand on rationalization of high tension connection becomes more significant. The purpose of this study is to suggest direction for the rationalization of high tension bolt connection and to also provide fundamental information for the improvement of the design specifications. In order to accomplish the purposes, the design specifications in Korea was analyzed and compared with other specification from abroad, and was studied one of the most important factors including slip coefficient, and the specifications on the size of bolt holes. The effect of over-sized bolt hole and the reduction of axial force on bolt was evaluated through the experimental studies on the slippage of the high tension bolt connections. Other research topics included herein includes the difference of slip coefficients, the effect of over-sized bolt holes and the gap distance of members, and the application of filler plate and corrosion protected bolts. From the research results, it is known that the specifications in Korea apply a constant slip coefficient with respect to the contacted surface conditions while various coefficients are available depending on the contacted surface conditions. Therefore, it is recommended that the specifications in Korea also develop and detail the slip coefficient which can appropriately take account of the variation of the contacted surface conditions. It is also suggested that the limitation abroad on the over-sized bolt hole may be applied for enhancing the effectiveness of construction.

• Science of Emotion and Sensibility
• /
• v.9 no.spc3
• /
• pp.209-224
• /
• 2006

Hierarchy which is often named as the tree-structure is used to reduce complexity and show primitive structures of complicated information. This paper aims at explaining information-visualization methods using hierarchies in multimedia domains and prospecting the possible applications by examining how they affect the user's tasks involved in information-seeking activities. As a result, four types of information visualization methods named Treemap, Hyperbolic, Cone Tree and DOI Tree employed in multimedia domain, are presented and pros and cons of each method are explained in this paper. Another important part is defining the core tasks and other related-tasks in information-seeking activities, such as, overview, zoom, filter, details-on-demand, relate, history, and extract. Followings are major findings. Treemap uses 'overview' as the core task, which makes user to gain a overall meaning of the whole information cluster. Hyperbolic and DOI Tree apply 'Boom' task through the function of focus+context or by the function of meaningful scaling to magnify or downsize each node. Cone Tree, also, makes the information organizer to classify the patterns of information acquired in the process of users' information-seeking activities by using 'extract' task. Through this study, it is finally found out that the information-visualization methods using hierarchies in multimedia domains should incorporate the wide variety of functional needs related to users' information-seeking behaviors beyond the visual representation of information.

• Journal of Service Research and Studies
• /
• v.7 no.3
• /
• pp.21-36
• /
• 2017

Recently in information business, managing and auditing are getting more difficult because of enlargement, intellectualization and convergence. In addition, ordering organizations have been having a difficult time choosing a service because not only there is a huge overlap between information audit system and PMO but also the work boundaries of those two are not clear enough. As the demand that a business managing and auditing frame work need to be more developed in terms of independence, quality, economic feasibility and responsibility has been increased, the Korea Association Of Information Systems Audit has been attempting to improve business management and audit system by proposing Unified Project Management Framework whose process is approximately constructed. This study introduces Unified Project Management Framework which is all-encompassing from the ordering at the very beginning of business to the operating in the post-processing step and then verifies its work scope through a comparative analysis with existing management systems. Also, this thesis examines the necessity of unification of audit system and PMO by analysing existing similar systems. At the end, this study, analyses the suitability of Unified Project Management Framework by evaluating it with IT goal frame of COBIT5 which is constructed based on BSC performance management index. The result of the analysis is expected to help people in charge understanding the features of Unified Project Management Framework before they apply it to practical business.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.175-193
• /
• 2010

This paper has two objectives. One is to understand status of the distribution industry in Korea and compare it with industrialized countries. The other is an attempt to apply input-output(I-O) analysis to investigate the economic impacts of the distribution industry in the national economy for the year 2008. In the economy as a whole, the distribution industry represented about around 15 per cent employment and accounted for near 8 percent in GDP. The employment portion of the distribution in overall industry is almost same that of US, UK, and Japan, but shared portion in GDP is at least 3 per cent below these countries. Next, a static I-O framework is employed, focusing on two topics in its application. First, the impacts of the product or investment in the distribution industry on the product, value-added, and employment of other sectors are explored by using demand-driven model. Second, the national economic impacts of the distribution industry in Korea are looked into by using open model and inter-industry analysis. It can be summarized that the distribution industry has a high production-inducing effect, more worker and employment-inducing effect, a high forward and a low backward linkage effect. Finally, the implications and limitations of this study are discussed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.22-30
• /
• 2019

The demand for National Woodland Burial Grounds is expected to increase as interest in natural burial, including woodland burial, is increasing. This study was performed to provide evaluation criteria applying weighting factors to the evaluation for location selection. Through literature review, location selection evaluation factors for forest facilities, similar to forest welfare facilities, were reviewed and analyzed. As a result of the analysis, 74 preliminary evaluation criteria were selected. Based on the results, three expert groups (public servants in central and local governments and other public agencies in charge of forest welfare facility, related field researchers, and civil experts) reviewed the preliminary evaluation factors. Evaluation factors were classified into two categories, 6 sub-categories, and 22 segments. The selected evaluation factors were layered for the second preference survey. They were classified into Forest Environment and Human Environment, and those categories were further classified into three categories. Then they were further classified into segments. After segmentation, the experts who participated in the first survey checked the differences in the significance of the layered factors by utilizing AHP. The site evaluation criteria table was prepared using the evaluation criteria and the significance of each layer. In order to apply it to the candidate sites, 10 sites including the existing National Woodland Burial Grounds and 9 candidate sites considered in the previous studies were compared and analyzed including Ulju County Ulsan City, Suncheon City Jeollanam-do and Janggun-myeon Sejeong City.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.617-625
• /
• 2008

In low-density areas where travel pattern is widely dispersed and travel demand is relatively low, transit operators find it very difficult to provide a reasonable level of service at a reasonable cost. Timed-transfer system or network, if designed properly, can provide a reasonable level of service for passengers using transit systems serving low-density areas. The paper intends to apply a timed-transfer system for bus lines serving Yangsan City area and to assess the effects resulted from the application. The concept of a timed-transfer network/system is briefly described, and the present conditions of bus systems in Yangsan City area are discussed, focusing on the aspects of network type and the related problems. The bus timed-transfer network for the area is then developed by adjusting the existing routes and network with the consideration of travel time, route alignments, headways and transfer centers. One must note that developing a timed-transfer network presumes that network and schedule should be developed together. The effects of the developed time-transfer system on the passengers and operators are found substantially so as to justify its introduction to the City. The results of this study will be of considerable use for planners to design the transit systems in low density areas, where in general travel activities are widely dispersed and travel demands are low, so that provision of good quality of transit services are difficult.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.145-149
• /
• 2003

Manufacturing facilities of the pharmaceuticals must meet certain level of the cleanness required so that foreign substances such as dust, moisture, heat, microorganism, or virus do not contaminate the product. In case of radiopharmaceuticals for medical treatment and diagnosis, not only should the operators and environment be protected from radiation but also need to be isolated from the foreign contaminant. Therefore, manufacturing facilities for radiopharmaceuticals must satisfy the design standards of both hot cell and clean room which are specified by GMP. However, standards of maintaining negative pressure for preventing spread of radioactive contaminant in isolated facilities conflict with the standards of maintaining positive pressure for keeping cleanness. To solve this problem, air pressure of hot cell was designed lower than in the adjacent area to meet standards of the radiation safety. To keep higher cleanness in certain part of the hot cell for filling, minimal relative positive pressure allows. In order to effectively maintain the cleanness that is required for production of Tc-99m generator, which takes 70% of whole demand of radiopharmaceuticals, the rooms placed in each side of production room are used as a buffer area and three lead hot cells are installed in production room. In this research, we established the appropriate engineered design concept for Tc-99m generator manufacturing facility, which satisfies both GMP cleanness standard for preventing particles, bacteria, other contaminants and the regulations of radiation safety for supervising and controlling the amount of radiation exposure and exhausted radioactivity. And the concept of multi-barrier buffer zones is introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.13-20
• /
• 2009

There have been increasing interests in the odor generation problems as concerns about the quality of life has been increased recently. Especially, approximately 67% of the odor complaints from environmental facilities are those from sewage treatment facilities and food waste treatment facilities. Moreover, sewage ocean dumping will be prohibited from 2012 by the international and domestic ocean laws, and thus, demand for alternative management plans is increasing. Therefore, it was first selected 5 sewage treatment facilities and 5 food waste treatment facilities where the amounts of waste are relatively immense in Busan, and collect their sludge samples. Then it was investigated the samples' physical and chemical characteristics through proximate analysis, elemental analysis, XRF analysis, and calorific value analysis. Finally, estimate the $H_2S$ emission rates were estimated in order to apply the results as the basic data for providing the fundamental solution for the oder complaints. As a result, the concentration of $H_2S$ in sewage sludge and in food waste treatment facility were 57.3 mg/kg and 19.7 mg/kg in average, respectively. Finally, the units of $H_2S$ in wastes stored in total 10 waste treatment facilities was estimated 16,017,910.0 mg/d.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.132-137
• /
• 2001

Recently, the demand for notebook PC with lithium ion batteries has steadily increased and consumers require them to adopt a SBP(smart battery pack) able to predict the remaining capacity and the run time of batteries precisely. The SBP is composed of a protection If, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. The protection IC shut abmormal current down by using overcharge/overdischarge FET. A SBS(smart battery system) is composed of a system host, a smart battery and a smart battery charger. The smart ICs for SBP will be required to provide a low cost, low current consumption and small size. There will need to develop a microcomputer control type IC and an optimum algorism which is able to predict the residual capacity and the residual run time precisely. SBS will apply to many kinds of industry fields such as an electric bicycle, an electric vehicle, a load levelling and a military.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.99-109
• /
• 2020

What sports have in common is that they must use their bodies to play and lead to victory. The use of the body differs in many ways depending on the event, which part should be used as the focus. The commonality of all sports is that sports can achieve the best results by using and using parts of the body in harmony. The use of strength or muscles varies depending on the type of sport or the type of sport, so the use of the body or the results of athletic events also varies. Sports are premised on the organic use of the body, but the implications of sports can be found in that the degree of organic use does not apply equally to all sports. Sports demand organic balance and flexibility. Depending on the type of sport, you can explore which organic harmony produces more effective effects and find out which events are more beneficial to the human body. This study aimed to find out whether the organic harmony of the body actively contributes to the development of sports and a healthy mental culture. In this study, we proposed the hypothesis that the modern Pentathlon will induce the most desirable organic harmony as a global Olympic sport, and tried to verify that the hypothesis is valid and verifiable. In order to do this study, I tried to find out the organic viewpoints centered on the Miletos school, re-examine the meaning of the modern Pentathlon of games as an Olympic event, and conduct organic harmony and exploration of the modern Pentathlon of games in terms of sports.