• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.17-28
• /
• 2008

This study examines the ramp-up analysis techniques which have been introduced till now and presents the strength and weakness of each method. The applicability of each technique was reviewed using a case study involving the data of Cheonan-Nonsan motorway usages where seasonal variations of the data were removed. The results showed that all the techniques except F-test have the same ramp-up period of 12 months. The level of Tamp-up was 65%-72% compared to that of the real traffic volume at the beginning of opening. The demand recovered to the stabilized level as time goes on. To apply the methodology to practical demand forecasts actual surveys of real data of traffic demand should be performed. With these efforts to the patronage ramp-up, more reliable demand analyses can be accompanied.

• IE interfaces
• /
• v.10 no.1
• /
• pp.119-134
• /
• 1997

The management of blood inventory is very important within the medical care system. The efficient management of blood supplies and demands for transfusions is of great economic and social importance to both hospitals and patients. For any blood type, there is a complex interaction among the optimal inventory level, daily demand level, daily supply level, transfusion to crossmatch ratio, crossmatch release period, issuing policy and the age of arriving units that determine the shortage and outdate rate. In this paper, we develop an efficient decision rule for blood inventory management in a hospital blood bank which can support efficient hospital blood inventory management using simulation. The primary use of the efficient decision rule will be to establish minimum cost function which consists of inventory levels, period in inventory, outdate and shortage rate for whole blood and various component inventories for a hospital blood bank or a transfusion service. If the administrator compute the mean daily demand for each blood type, the mean daily supply for each blood type, the length of the crossmatch release period and the average transfusion to crossmatch ratio, then it is possible to apply the efficient decision rule to compute the optimal inventory level, inventory period, outdate and shortage rate. This rule can also be used as a decision support system that allows the blood bank administrator to do sensitivity analysis related to controllable blood inventory parameters.

• Korean System Dynamics Review
• /
• v.5 no.1
• /
• pp.49-71
• /
• 2004

Demand-side Management can be defined as'any utility activity aimed at modifying customers' use of energy to produce desired changes in the utility's load shape'. Customers benefit by being able to control energy costs and improve quality of life and become more productive. Utilities benefit from DSM's value as a resource that enhances asset utilization and reduces both fuel costs and environmental emissions. The scope of DSM includes load management through rate schedules and conservation by improving energy effciency and using electricity consumption effectively. This paper study the DSM resource evaluation and customer behavior analysis todesign the DSM Program plan in response to customer needs. We develop basic system dynamics model to analysis the customer behavior based on a survey research. The DSM Program participants in the Hi- efficiency Inverter, Electric motor and efficient lighting applicancies operating by Conservation program 2002 become the survey objects. DSM resource evaluation evaluate firstt the distribution potentialities of each machine and then forecast the degree of diffusion. We apply the system dynamic approach to simulate the dynamic DSM market situation at the domestic beginning. This model will give the energy Planner the opportunity to create different scenarios for DSM program planning. Also it will lead to increased understanding of the dynamic DSM market

• Journal of the Korea Society for Simulation
• /
• v.5 no.1
• /
• pp.13-27
• /
• 1996

The management of blood inventory is very important within the medical care system. The efficient management of blood supplies and demands for transfusion is of great economic and social importance to both hospitals and patients. Fro any blood type, there is a complex interaction among the optimal inventory level, daily demand level , daily supply level, transfusion to crossmatch ratio, crossmatch release period, issuing policy and the age of arriving units that determine the shortage and outdate rate. In this paper, we develop an efficient decision rule for blood inventory management in a hospital blood bank which can support efficient hospital blood inventory management using simulation, The primary use of the efficient decision rule will be to establish minimum cost function which consists of inventory levels , period in inventory, outdate and shortage rate for whole blood and various component inventories for a hospital blood bank or a transfusion service, If the adminstrator compute the mean daily demand for each blood type, the mean daily supply for each blood type, the length of the crossmatch release period and the average transfusion to crossmatch ratio , then it is possible to apply the efficient decision rule to compute the optimal inventory level, inventory period , outdate and shortage rate. This rule can also be used as a decision support system that allows the blood bank adminstrator to do sensitivity analysis related to controlled blood inventory parameters.

• International Journal of Railway
• /
• v.5 no.4
• /
• pp.139-143
• /
• 2012

In Korea, almost 700 industrial parks are under operation. Generally, industrial parks consist of national industrial parks and local industrial parks which are managed by a central government and by local governments respectively. The developing countries such as Korea, China and Vietnam etc. have constructed many industrial parks, which result in the change of land use pattern and also affect future trip demands. Therefore, in estimating traffic demands, it is very important to consider the industrial park development. This study aims to improve the methodology in estimating a freight trip generation rate with the data based on a nationwide commodity freight survey. The result showed that it is desirable to apply freight trip generation rate by the industry sector in estimating freight trip generations and using the production area of firm as an indicator. Specially, the reliability of the rates through a survey could be made sure because a sample rate based on firms in industrial parks was over 25% and the response rate was over 67%. The sample rate and response rate are very superior as compared to surveys conducted in many other countries. Because industrial parks have significant effects on forecasting transportation demand in pre-feasibility studies of transport and logistics projects, it is expected that the accuracy of freight trip demands would be improved through the results of this study.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.349-367
• /
• 2013

In MANET, the AODV routing protocol with on-demand method has a problem in large control packet overhead. In order to improve this, we first need a comprehensive analysis of correlation between performance metrics and factors affecting the performance of AODV. Selected parameters based on this analysis make it enable to be a more accurate and fair performance analysis, as well as to reduce the time and effort when constructing a scenario for performance analysis. In this paper, various scenarios are configured to apply AODV by varying the values of factors affecting the performance with network simulator QualNet 5.0, and then the results are analysed using performance metrics proposed by IETF MANET working group. This paper also founds a correlation between performance metrics and factors affecting the performance for AODV routing protocol, choosing the values of factors that represent many of the most maximum and minimum values of each performance metrics, and proposes optimal simulation parameters for a more accurate performance evaluation of routing protocols with minimal scenario in experiments. Next, performance comparison of AODV, DSR and DYMO routing protocols based on the proposed simulation parameters is shown which provides a comparative analysis on the performance of on-demand routing protocols. Results of this paper could be very useful for the researcher or service provider who wants to find nice simulation environment or select a proper routing protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.837-840
• /
• 2009

In recent years, Item Level RFID market, attaching RFID instead of barcodes to individual units for item rather than box and pallet units, is expected to expand both domestically and internationally in the future. In this study, by analyzing the demand for Item Level RFID services which apply RFID to the individual units, we would like to come by strategies that promote and develop RFID industry. This study consists of the following contents. First, we analyzed trends in domestic and overseas markets of Item Level RFID. Second, we surveyed the RFID demanding companies and analyzed Item Level RFID promising service sector, the expected leading field of market, the leading field of dissemination, and the obstacles of its introduction. Finally, on the basis of the results of the empirical study, we presented the strategies to promote Item Level RFID.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.489-499
• /
• 2010

The securing of raw material is an important requirement for economic development. Many countries, including Korea, actively seek out a stable supply of minerals such as manganese. Manganese nodules are rock concretions on the sea bottom formed of concentric layers of iron and manganese hydroxides around a core and include several strategic minerals necessary for economic development. In particular, the manganese nodule development project (MNDP) plays an important role in the Korean national economy. This study attempts to apply input-output (I-O) analysis in investigating the economic impacts of the MNDP in the Korean national economy. A static I-O framework was employed, focusing on four topics in its application; the production-inducing impacts, the value-added-inducing impacts, the employment-inducing impacts and R&D-inducing impacts of MNDP investments on other sectors. To this end, several versions of the demand-driven models are utilized. In addition, inter-industry linkage analysis is performed to obtain information on the forward and backward linkage effects of industries, including MNDP, to quantify the strength of causation among these industries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.300.2-300.2
• /
• 2016

Increasing of the demand for energy savings for buildings, thermal barrier films have more attracted. In particular, as heat loss through the windows have been pointed out to major problems in the construction and automobile industries, the research is consistently conducted for improving the thermal blocking performance for windows. The main theory of the technology is reflect the infrared rays to help the cut off the inflow of the solar energy in summer and outflow of the heat from indoors in winter to save the energy on cooling and heating. Furthermore, this is well known for prevent glare, reduces fading caused by harmful ultraviolet radiation and easy to apply on constructed buildings if it made as a film. In addition to these advantages, apply the transparent electrode to eliminate condensation by heating. Generally ITO is used as a transparent electrode, but is has a low stability in environmental factors. In this study, ITO and its alternative, ATO, is deposited by sputtering system and then the characteristic is evaluated each material based thermal barrier thin film. The optical property was measured on wide range of wavelength (200 nm 2500 nm) to know the transparency in visible wavelength and reflectivity in IR wavelength range. The electrical property was judged by sheet resistivity. Finally the changes of the temperature and current of the deposited film was observed while applying a DC power.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.18-30
• /
• 2015

As the speed of networks that subscribers can use has greatly increased, demand for high-quality broadcast content, such as from Internet Protocol Television (IPTV) and Video on Demand (VoD), is likewise increasing. Therefore, while broadcasters are increasing content and channels, they are striving to improve consumer quality of experience (QoE) to differentiate themselves from competitors, including by producing higher physical-quality content. Recently, subjective measurement methods have been internationally standardized as the most reliable approach for measuring and evaluating IPTV QoE. However, a majority of these methods are performed in experimental environments and are based on the extremely brief viewing period of approximately ten seconds using original reference videos. It is actually difficult to apply standard evaluation methods based on a ten-second viewing interval to assess real broadcast watching of IPTV or other services that involve a longer time (i.e., more than thirty minutes). In this paper, we therefore propose a method that accommodates actual viewing environments. Using the mean opinion score, we experimentally analyze the effects of evaluation interval changes under actual conditions in which IPTV service is provided. In addition, we propose improvements by applying the results into actual live broadcast IPTV service and by analyzing consumer service QoE.