• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.203-215
• /
• 2007

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.97-136
• /
• 2004

The Northeast Asian air cargo market has expanded tremendously as a result of the opening up of the Chinese market. The importance of the Asia-Pacific region in the global air transport has also increased. The exchange of human and material resources, services, and information in Northeast Asia, which is expected to increase in the near future, requires that the airlines operating within this region adopt a more liberalized approach. This paper introduced alternatives which can be applied to the Northeast Asian airlines industry so as to bring about the integration of regional air transport: First, this paper found a need for individual Northeast Asian nations to alter their policies towards the airlines industry. Second, each country should further liberalize their respective domestic air transport. Third, there is a need for freer air service agreements to be signed between the nations of Northeast Asia. Fourth, the strategic alliances between the airlines operating in Northeast Asia should be further strengthened. Fifth, this liberalization process should be carried out in an incremental manner, beginning with more competitive airports and routes, or with less-in-demand routes. Sixth, there is a need for a shuttle system to be put into place between the main airports in China, Korea, and Japan. Seventh, these three nations jointly develop aviation safety and security systems that are in accordance with international standards. Eighth, the liberalization process of the aviation industry should be undertaken in conjunction with other related fields. Ninth, organizations linking together civil aviation organization in the Asia-Pacific area should be formed, as should each government linking together. By doing so, these countries will be able to establish regular venues through which to exchange opinions on the integration and liberalization of the air cargo market so as to induce the gradual liberalization of the actual market. The liberalization of the air transport in Northeast Asia will prove to be a daunting task in the short term. However, if the Chinese airlines continue to exhibit continuous growth and Japanese airlines are able to complete their move towards a low-cost structure, this process could be completed earlier than expected. Over the last twenty five years the air transport has undergone tremendous changes. The most important factor behind these changes has been the increased liberalization of the market. As a result, rates have decreased while demand has increased. This has resulted in turning the air transport industry, which was long perceived as an industry in decline, into a high-growth industry. The only method of increasing regional exchanges in the air transport is to pursue further liberalization. The country which implements this liberalization process at the earliest date may very well emerge as a leading force within the air transport industry.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.375-402
• /
• 2020

The adoption and entering into force of the Registration Convention was another achievement in expanding and strengthening the corpus iuris spatialis. It was the fourth treaty negotiated by the member states of the UNCOPUOS and it elaborates further Articles 5 and 8 of the Outer Space Treaty(OST). The Registration Convention also complements and strengthens the Article 11 of the OST, which stipulates an obligation of state parties to inform the UN Secretary-General of the nature, conduct, locations, and results of their space activities in order to promote international cooperation. The prevailing purposes of the Registration Convention is the clarification of "jurisdiction and control" as a comprehensive concept mentioned in Article 5 8 of the OST. In addition to its overriding objective, the Registration Convention also contributes to the promotion and the exploration and use of outer space for peaceful purposes. Establishing and maintaining a public register reduces the possibility of the existence of unidentified space objects and thereby lowers the risk such as, for example, putting the weapons of mass destruction secretly into orbit. And furthermore it could serve for a better space traffic management. The Registration Convention is a treaty established to implement Article 5 of OST for the rescue and return of astronaut in more detail. In this respect, if OST is a general law, the Registration Convention would be said to be in a special law. If two laws conflict the principle of lex specialis will be applied. Countries that have not joined the Registration Convention will have to follow the rules concerning the registration of paragraph 7 of the Declaration by the United Nations General Assembly resolution 1721 (X V I) in 1961. UN Resolution 1721 (XVI) is essentially non-binding, but appears to have evolved into the norm of customary international law requiring all States launching space objects into orbit or beyond to promptly provide information about their launchings for registration to the United Nations. However, the nature and scope of the information to be supplied is left to the discretion of the notifying State. The Registration Convention is a treaty created for compulsory registration of space objects by nations, but in reality it is a treaty that does not deviate from existing practice because it is based on voluntary registration. With the situation of dealing with new problems due to the commercialization and privatization of the space market, issues related to the definition of a 'space object', including matter of the registry state of new state that purchased space objects and space debris matter caused by the suspension of space objects launched by the registry state should be considered as matters when amendments, additional protocols or new Registration Convention are established. Also the question of registration of a flight vehicle in the commercial space market using a space vehicle traveling in a sub-orbital in a short time should be considered.

• Journal of Korean Academy of Nursing
• /
• v.23 no.1
• /
• pp.118-129
• /
• 1993

In order to approach the nursing care of clients who are using oriental medicine and to understand the perception of the client who uses oriental medicine practices and the need to develop a model of nursing related to oriental medicine it is important to examine the major nursing concepts as they are found in oriental medicine and as they are differently defined according to the basic thought, theory and philosophical perspectives between East and West. Oriental medicine developed based on Sung Confucianism the teachings of Chut-zu, especially Tai-Chi-Tu Shuo and energy thought which are similar to traditional Korean Sasang Constitutional medicine. The basic theory on which oriental medicine is build is the theory of the five elements of Yin / Eum-Yang Theory(cosmic dual forces) and Meridian Theory. The most important attribute of Yin Yang is the concept of duality, confrontation and dependence, within Yin Yang but which do not exist separately. That is, the universe is a vast, indivisible entity within which all things exist in harmonious interdependence and balance. Harmony is achieved only when the two primorial forces, Yin and Yang, are brought into perfect balance. Each is contained within the other and there is a continuing interchange between the two. This also applies to the human body including human health which is defined as balanced harmony. The most universal connection of Yin and Yang is found in the universe where the five elements of life, fire, water, earth, wood and metal can be explained as having either Yin or Yang and therefore being in a state of connectedness but systematically circulating between the two, that is essentalilly one (the control of the unified ) or as coexistant poles of individual wholes (the pluralism of Yin Yang Theory) so that it is all unified(balanced) in the Great Absoulte. Human beings also maintain a balance of Yin and Yang in the five elements and this relationship is very important in approaching ·oriental medicine, The meridians are the channels in the body through which the life force flow throughout the body. In oriental medicine the meridians are seen as the railroad, the acupuncture points on the meridians as the stations and energy as the train. In the normal healthy organism, all are maintained in balance and in a contiuous circulation of energy. illness is the result of the energy flow becoming disarranged. Although practitioners of oriental medicine approach the client differently than do practitioners of Western medicine and their method of examining the patient is different, the basic objectives of the examination are the same for practitioners of both types of medicine. Therefore if each could be used to supplement the defiencies in the other and achieve a harmonious cooperation between the two, a higher level of care which is culturally appropriate to korean culture could be achieved. The traditional korean concept of health is a naturalistic view which emphasizes being in harmony with nature. Any manifestation of disease is considered a sign that the body is in a state of disequilibrium and is thus no longer in harmony with the universe. The wholistic view of the world held by practitioners of oriental medicine can be used by nursing in the development of a world view of nursing in which the human being is seen within the macrocosm as part of the natural phenomenon of the universe and but also as a microcosm of the universe, a universe which is a vast and indivisible entity within which all things exist in harmonious interdependence and balance. Interaction between human beings and their environment and the relationship of this interaction to health are concepts that are also found in nursing. Nursing views human brings, not as an accumulation of separate cells and organs but, as unified wholes interacted in very close relationship nth their environment. Nursing also maintains a view of human beings in which emphasis is placed on the role of the mind in explaining the concepts of harmony and balance in health. Although there are differences between oriental medicine and nursing in approaches to clients, the basic point of view and philosophy have many fundamental similarites. An understanding of the basic thought and philosophy of oriental medicine if applied to nursing, would allow for the development, not only of nursing related to oriental medicine, but of a nursing theory appropriate to the korean context.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.268-276
• /
• 2010

Earthquake Hazard Mitigation Law was activated into force on March 2009. By the law, the obligation to monitor the effect of earthquake on the facilities was extended to many organizations such as gas company and local governments. Based on the estimation of National Emergency Management Agency (NEMA), the number of free-surface acceleration stations would be expanded to more than 400. The advent of internet protocol and the more simplified operation have allowed the quick and easy installation of seismic stations. In addition, the dynamic range of seismic instruments has been continuously improved enough to evaluate damage intensity and to alert alarm directly for earthquake hazard mitigation. For direct visualization of damage intensity and area, Real Time Intensity COlor Mapping (RTICOM) is explained in detail. RTICOM would be used to retrieve the essential information for damage evaluation, Peak Ground Acceleration (PGA). Destructive earthquake damage is usually due to surface waves which just follow S wave. The peak amplitude of surface wave would be pre-estimated from the amplitude and frequency content of first arrival P wave. Earthquake Early Warning (EEW) system is conventionally defined to estimate local magnitude from P wave. The status of EEW is reviewed and the application of EEW to Odesan earthquake is exampled with ShakeMap in order to make clear its appearance. In the sense of rapidity, the earthquake announcement of Korea Meteorological Agency (KMA) might be dramatically improved by the adaption of EEW. In order to realize hazard mitigation, EEW should be applied to the local crucial facilities such as nuclear power plants and fragile semi-conduct plant. The distributed EEW is introduced with the application example of Uljin earthquake. Not only Nation-wide but also locally distributed EEW applications, all relevant information is needed to be shared in real time. The plan of extension of Korea Integrated Seismic System (KISS) is briefly explained in order to future cooperation of data sharing and utilization.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.73-81
• /
• 1999

Midpalatal suture expansion is often used for patients haying narrow maxillary arch, cleft palate, respiratory handicap with narrow nasal cavity. CGRP has been known as a modulator of pain transmission in central nervous system and a local effector to peripheral tissue causing vasodilation, increase of blood flow, modulation of immune system, regulation of macrophagic function and stimulation of bone formation. To investigate changes of CGRP-immunoreactive nerve fibers in midpalatal suture during the expansion, immunohistochemical study was performed by using rats. Experimental rats (10 weeks, 250 gm) were divided into five groups (control, 1, 4, 7, 14 days group (each n=4) and applied orthodontic force (approximately 200gm) to upper anterior incisors. Frozen sections of midpalatal suture area were immunostained by using rabbit antisera. The results were as follows. ${\cdot}$ The CGRP-immunoreactive nerve fibers were hardly observed in control group. ${\cdot}$ In 1 day group, the CGRP-immunoreactive nerve fibers were more increased around the vessels than control group. ${\cdot}$ In 4 days group, the CGRP-immunoreactive nerve fibers were more increased than control group, but not more increased than 1 day group. Vascular diameter was more enlarged. ${\cdot}$ In 7 days group, especially, hematoxilin affinity of cells was remarkable and cells were arranged along the bone margin. The CGRP-immunoreactive nerve fibers were more reduced than 4 days group and vascular diameter was also reduced. ${\cdot}$ In 14 days group, the CGRP-immunoreactive nerve fibers were similar to those of 7 days group and the irregularity of bone margin was almost recoverd. In Conclusion, the CGRP-immunoreactive nerve fibers nay be related to initial neurogenic inflammatory reaction in expanding mid-palatal suture.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.416-426
• /
• 2008

The purpose of this study was to evaluate the mobility and ratio of the bone-implant contact (BIC) of a sandblasted, large grit and acid-etched (SLA) orthodontic micro-implant. Methods: Ninety-six micro-implants (48 SLA and 48 machined) were implanted in the upper and lower buccal alveolar bone, and palatal bone of four beagle dogs. Two weeks after surgery, orthodontic force (150-200 g) was applied. Two beagles were sacrificed at 4-weeks and the other two at 12-weeks. Histomorphometric comparisons were made between the SLA experimental group and the machined micro-implant as a control group to determine the ratio of contact between the bone and implant. Micro-implant mobility was also evaluated using $Periotest^{(R)}$. Results: Periotest values showed no statistically significant difference in the upper alveolar and palatal bone between groups except for the lower buccal area. BIC in the upper buccal area showed no significant difference between groups both at 4-weeks and 12-weeks. However, both the groups showed a significant difference in BIC ratio in the rest of the experimental areas between 4 weeks and 12 weeks. The experimental group showed active bone remodeling around the bone-implant interface compared to the control group. Conclusions: There were significant differences in the BIC and the Periotest values between the surface-treated and machined micro-implants according to bone quality in the early stage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.