• Information and Communications Magazine
• /
• v.20 no.10
• /
• pp.121-130
• /
• 2003

1997년 활동을 시작한 APAN-KR (Asia Pacific Advanced Network - Korea) Technology Area 활동을 계승하여 2003년 초에 재구성된 ANF (Advanced Network Forum: 한국첨단망협회) Application Technology Area에 대한 전반적인 소개에 이어서 VoIP (voice over IP), DV/VC(digital video / video conferencing) 및 P2P(peer to peer)로 나누어진 각 세부 WG (working group)들의 소개, 활동 내용, 향후 계획 등을 살펴본다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.40-47
• /
• 2007

The objective of this study is to analyze the propriety of the Biotope Area Factor's(BAF) application and propose an improvement plan. The BAP system, initially started by Seoul metropolitan city, is being settled in Korea. The BAF originated from the Biotop $Fl{\ddot{a}}chen$ Faktor(BFF) system of Berlin Germany. It was established as part of the Landscape Plan for the ecological function recovery in the high density built-up area with a sense of environmentally friendly urban management. The study compared the BAF's present condition of Ganddong-Gu, Seoul with Seoul's BAF system. Some problems appeared from the system application. Firstly, it may cause ecological damage if the site ranges are more than current BAF system limits. Secondly, the application of the current BAF system has the possibility of general redevelopment, but the partial improvement considering current standards of the high density built-up area's paving section is impossible. Lastly, division of the application object and application type are not divided well. In addition, the Seoul BAF which is currently applied across the board is based on the destruction of the natural area and low density built-up area. Accordingly, to improve these problems requires a complementary system protecting the ecological function prior to the application of the BAF and with restricted application to high density of BAF system built-up area.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1918-1925
• /
• 2023

Objective: The objective of this study was to evaluate the effect of biogas slurry application on biomass production and the silage quality of corn. Methods: A field experiment was conducted in which corn was grown using different biogas slurry application rates. The effect of 25% to 500% biogas slurry nitrogen replacement (T1 to T14) on the yield and quality indices of corn were studied by field plot experiments. Results: The results revealed that biogas slurry application improved the stem diameter and relative feed value of corn silage in treatments T13 and T11. Moreover, the fermentation quality of corn silage was improved due to an increase in lactic acid content; in comparison with the chemical synthetic fertilizer (CF) group. The crude protein contents of corn silage had no obvious change with increasing biogas slurry application. However, the forage quality index of acid detergent fiber was decreased (p<0.05) in the T11 group compared with the CF group. In addition, higher (p<0.05) 30 h in vitro dry matter digestibility and 30 h in vitro neutral detergent fiber digestibility were observed in the T11 and T13 groups than in the CF group. Conclusion: Based on these results, it was concluded that the optimum biogas slurry application rate for corn was approximately 350% to 450% biogas slurry nitrogen replacement under the present experimental conditions.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.289-295
• /
• 2019

In this paper, we implemented a safety navigation mobile application that converged AtoN information and location-based services. When application user uses the smartphone's GPS sensor to transmit the user's vessel location data to the data server, the user receives information of which its providing range is considered, such as stored AtoN data, neighboring vessels information, danger area, and weather information in the server. Providing information is sorted based on the smartphone's direction and inclination and it will be also delivered via wireless network (5G, LTE, 3G, WiFi). Additionally the application is available to implement other functions such as information provision through voice and text alarming service when the user's vessel is either approaching or entering the danger area, and an expanded information provision service that is available in shadow area linking with data-storing methods; other linkable data such as weather and other neighboring vessels will be applied based on the lasted-saved data perceived from the non-shadow area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.209-209
• /
• 2017

The application of liquid swine manure to soil has been commonly reported to increase crop productivity by improving plant nutrient availability. This study was conducted to investigate the effect of liquid swine manure (LSM) application on yield of green manure crops in paddy. Three different application rates of LSM equivalent to 25%, 50%, and 75% of standard fertilization rate of P were applied to the paddy field after rice harvest, and two cover crops, hairy vetch (Vicia villosa Roth) and barley (Hordeum vulgare L.), were subsequently mix-seeded and cultivated. Plant height of barley was 7% higher in LSM P25% and LSM P50% compared to control treatment (no LSM application), while no significant difference was observed between LSM P75% and control. However, there were no significant differences in plant height of hairy vetch among treatments. Dry matter (DM) yield of green manure increased with LSM application rate, reaching a maximum at LSM P50% (38 and 17% yield increase over control for hairy vetch and barley, respectively), but it decreased at LSM P75% rate. Nitrogen production by green manure crops was the highest in LSM P50% treatment, where the amount of produced N was 57% higher than the optimum N fertilization level for rice ($90kg\;N\;ha^{-1}$). Excess green manure biomass above an optimum level can be removed and utilized either for incorporation into nearby cropland or for sale as fresh forage. Therefore, it is concluded that the application rate of LSM P50% is recommendable for the maximum biomass and nitrogen production from green manure crops in paddy.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.391-401
• /
• 2016

Objective: This study aims to examine domestic literature on eye-tracking in the design area, and to present new eye-tracking application directions. Background: Eye-tracking was introduced in the experimental psychology field for the first time in the 1950s. Eye-tracking has high utilization values in the design application area because eye-tracking can accumulate data on what people see, providing the quantitative values on eye movement. Method: This study examined the papers published in domestic journals, as well as the papers presented in conferences from 2000 to 2016 through DBPIA. Results: Although the use of eye-tracking technology was slightly meager in the product design area, it has been actively used for the evaluation analyses of preference and attention in architecture/public design. Eye-tracking also presented a method to design advertisement that is helpful to advertisement effect measurement, and product salesin the advertisement design area. Since detail psychological analysis is possible, the application of eye-tracking in the studies related with user interface has been active. Conclusion: The eye-tracking technology is projected to be actively used as a new interface means, such as in helping in disabled people's communication and in device control, in addition to conventional application areas. Application: This study would be of help to find future research areas of eye-tracking.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.591-598
• /
• 2002

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.242-251
• /
• 2016

Around the world, BIM application has been mandated. In Korea, an announcement was made in 2016 that BIM application will be required for all public constructions ordered by the Public Procurement Service. However, BIM cannot be used for building permits as Seumter, a building permit system, doesn't support BIM, even if it was used for building design. To utilize BIM for permit application, this study introduces a method of management for BIM-used permit application information. It was done by analyzing the data entered for new building permit application in Seumter. For the analysis, the permit application information is classified as internal BIM information and external BIM information and the required information is defined. To easily create and utilize the data types at the design stage, this study introduces a method of creating and utilizing a permit template. Also, this study developed a tool for combining the area information to add up all the related information such as gross floor area and floor area ratio. This study is significant in that it analyzes the required information for new building permit application among all the permit application types in Korea.

• Journal of Biosystems Engineering
• /
• v.35 no.4
• /
• pp.215-223
• /
• 2010

In order to develop an precision aerial pesticide application system to be attached to an unmanned helicopter which can be applied to small lots of land, this study analyzed the flowing and spraying characteristics of the spray droplets by the main rotor downwash by setting the application conditions at the flight altitude of 3 m, the diameter of main rotor of 3.1 m, the boom length of around 2.8 m, and the spraying rate of 8 L/ha. The results of this study are summarized below. Through analysis of the covering area ratio of the spray droplets by main rotor downwash by nozzle type, boom with tilt angle and height, it was found that the covering area ratio of the twin flat-fan nozzle of around 25% was more uniform than other types of nozzle, also boom with $10^{\circ}$ tilt angle and spraying height of 3 m was shown to be the appropriate conditions for aerial application of pesticides. It was found that the nozzle position to minimize the scattering loss of spray droplets due to vortex phenomenon at both ends of the main rotor was around 10 cm from the end of the main rotor. An application test for the aerial pesticide application system attached to the HUA-ACEI unmanned helicopter developed by the Rural Development Administration showed that the range of covering area ratio of the spray droplets was 10-25%, and the spraying width was approximately 7 m when over 10% of covering area ratio was considered for valid spraying.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.49-57
• /
• 2019

Purpose: This study aimed to investigate the application of temperature to balance the training by observing the effect of sensory changes in the foot sole area on dynamic equilibrium ability through change in the sole temperature. Methods: Participants (n=49), who were selected as a certain standard, applied cold and hot packs for ten minutes at two-week intervals, and the laboratory's internal temperature was maintained at $25^{\circ}C$. The subjects were measured before and after the cold and hot applications in the stable condition with bare feet. Before each experiment applied the cold and hot packs, the balance ability of the ordinary temperature was measured once by conducting a limit of stability test using Biorescue, and the changes in balance ability were observed by measuring once after applying the temperature to the foot sole by means of the ice pack and the hot pack. Results: The results of the dynamic balance test, both before and after the temperature application, were compared, and it was confirmed that the moving area before and after cold application decreased significantly, and the moving area before and after application was not significantly different. The mean of pre-post area differences was found to have decreased at a statistically significant rate in the forward, backward, rightward, leftward, and total areas for the group that received the cold application compared to the group that received the hot application. Conclusion: These findings showed that cold application to the foot sole decreased dynamic balance. There was no significant difference in the dynamic balance ability both before and after the hot application to the foot sole, so it is difficult to conclude that the hot application affected dynamic balance.