• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.207-223
• /
• 2013

Practical seismic assessment and design of retrofit for the multitude of small ecclesiastical monuments that abound in the Balkans is the subject of this work. Application of the proposed procedures and methodologies are illustrated in an example case study, a small byzantine church located in Western Greece, which is the region with the highest seismicity in Europe. The church, known as the Fragavilla Monastery, had remained almost undamaged for 800 years, until 1993 when the Pyrgos earthquake caused critical damage mainly in the vaults. Linear elastic analysis to the recorded ground motion, capped by a biaxial failure criterion reproduced the developed damage. The same modelling and analysis procedure was subsequently used for assessment of the intended retrofitting measures. Proposed retrofitting measures included mitigation of the undesirable implications of past interventions along with a combination of strengthening schemes with externally bonded AFRPs strategically placed in the structure. The effectiveness of the proposed solutions is gauged by successful reduction of stress intensity in the critical regions and mitigation of stress localization throughout the structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.469-474
• /
• 2002

Recently fiber sheets are used for strengthening the damaged concrete structures due to its many advantages such as its durability, non-corrosive nature, low weight, ease of application, cost saving, control of crack propagation, strength to thickness ratio, high tensile strength, serviceability and aesthetic. However, the lack of analytical procedures for predicting the nominal moment capacity by the fiber sheet reinforcement leads to difficulties in the effective process of decisions of the factors in the strengthening procedure. In this work, flexural strengthening effects by fiber sheets bonded on soffit and web of the member are theoretically studied for the reinforced concrete T beam. The analytical solutions are compared with experimental results of several references to verify the proposed approach.

• 전산구조공학
• /
• 제4권2호
• /
• pp.77-85
• /
• 1991

선형탄성파괴역학에서 특히 균열 쉘의 응력집중계수 산정을 위해 p-version 유한요소법에 기초한 선진유한요소기법이 제안되었다. 세가지 균열된 쉘 예제를 통해 응력집중계수 산정은 종래의 h-version 유한요소모델에 비하여 p-version 유한요소 모델이 수렴성과 정확도 면에서 훨씬 더 적합함을 보여주고 있다. 이 기법의 주요 이점은 근사해의 정확도가 요소분할이나 균열선단요소 또는 혼합형 변분원리등의 특별고려가 없이 확보될 수 있다는데 있다.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 International Conference on Digital Policy & Management
• /
• pp.13-24
• /
• 2004

Administrative procedures are the heart of the activity in each Town Council. Citizens do transactions every day and, sometimes, they do not understand what they must do or the steps to follow. We are developing a Web-based system to help citizens with this task in an easy way. The application is integrated a four year project called Albacete[Digital] that began in 2002 with the purpose of building an e-government system in Albacete, a city with over 150.000 citizens. This Administrative Information Centre is the result of the Administration study in the first year of the project and it will continue with the on-line transaction in the following years.

• 대한산업공학회지
• /
• 제7권2호
• /
• pp.55-59
• /
• 1981

An Application of Experimental Designs to Improve the quality of Industrial product : optimization Methodology of statistical model. The primary object of this paper is to aid scientists and Engineers, in applying response surface procedures to obtain operating conditions for many technical fields, particularly for industrial manufacturing processes. The problem considered in this paper is to select technically and scientifically some important factors affecting the quality of products through the experimental design and analysis of response surface. Even though the mathematical model is unknown these statistical analysis can be applicable to control the quality of industrial products and to determine optimum operating conditions for many technical fields, particularly, for industrial manufacturing processes. This paper proposes a method to obtain the optimum operating condition, and how to find the condition by using table of orthogonal array experiments, and optimization methodology of statistical model.

• The Journal of Korean Physical Therapy
• /
• 제10권1호
• /
• pp.181-191
• /
• 1998

The age of specialization is upon physical therapy, as evidenced by the many special interest group. One of the special interest is manual therapy, which is the study of neurology, biomechanic, behavior science and pathology as well as the application of evaluative and treatment techniques of the neuromusculoskeletal system. Trend of manual therapy cover the whole medical in Europe. but America has two categories which is the neurologic manual therapy and the orthopedic manual therapy. The neurologic manual therapy was integrated with theory of PNF, Bobath technique, Vojta which is neurophysiologic approach concept. It is called motor control. A key aspect of the motor control requires a through knowledge of neurobiologic, biomechanic, and behavioral science. The orthopedic manual therapy runs to the evaluation and treatment of joints and their surrounding structures increase or decrease mobility and Fain control. In this article has to define and clarify the basic concepts of orthopedic manual therapy by comparing the general concepts, evaluation schemes, and treatment procedures of John McM Mennell, James Cyriax, Geoffrey Maitland, Freddy Kaltenborn and Ola Grimsby.

• Journal of the Korean Statistical Society
• /
• 제36권2호
• /
• pp.209-228
• /
• 2007

Given scattered surface air temperatures observed by a network of weather stations, it is an important problem to estimate the entire temperature field for every location on the globe. Recently, a multi-scale spherical basis function (SBF) representation was proposed by Li (1999) for representing scattered data on the sphere. However, for a successful application of Li (1999)'s method, some practical issues such as network design, bandwidth selection of SBFs and initial coefficients are to be resolved. This paper proposes automatic procedures to design network and to select bandwidths. This paper also considers a preprocessing problem to obtain a stable initial coefficients from scattered data. Experiments with real temperature data demonstrate the promising empirical properties of the proposed approaches.

• Journal of the Korean Data and Information Science Society
• /
• 제7권1호
• /
• pp.1-12
• /
• 1996

The Gibbs sampler is a substantially powerful tool in Bayesian analysis. However, it is necerssary to choose the numbert of iterations and the size of random samples. This problem has been studied by many researchers. The proposed procedures by them are generally difficult to apply to a practical problem. The attraction of the sampling based approaches is their conceptual simplicity and ease of implementation for users with available computing resources but without numerical analytic efforts. In this paper we consider the problem of determining the number of iterations t, which is simple to application.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.165-168
• /
• 2002

In most shipyards, the measurement of 3-dimensional relative position of pipes should be connected in the block depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper describes the development results of pipe measurement system including system concepts, measuring procedures, system calibration, and its accuracy and productivity. And also, the possibility and things to be improved for application in shipyard are discussed in this paper.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.792-797
• /
• 2002

In the following paper two algorithms, suitable for the analysis of panchromatic data as provided by KOMPSAT-1 will be presented. One is a texture analysis which will be used to create a settlement mask based on the variations of gray values. The other is a fusion algorithm which allows the combination of high resolution panchromatic data with medium resolution multispectral data. The procedure developed for this purpose uses the spatial information present in the high resolution image to spatially enhance the low resolution image, while keeping the distortion of the multispectral information to a minimum. This makes it possible to use the fusion results for standard multispecatral classification routines. The procedures presented here can be automated to large extent, making them suitable for a standard processing routine of satellite data.