• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.17-28
• /
• 2008

Favorable policies for freight vehicles (i.e., trucks), such as exclusive "Truck-ways," have been proposed, and at the same time restricted policies for freight vehicles have been suggested because transportation of goods by truck aggravates traffic congestion and environmental conditions in urban areas. This study discusses the limitations of assessment processes for freight vehicle route management systems which have been carried out from limited perspectives such as physical distribution efficiency and traffic circulation. The objective of this study is to propose an assessment method of truck route management systems in urban areas which includes more varied criteria. This research modified the two existing assessment indices of physical distribution efficiency and traffic circulation. In addition two new assessment indexes are proposed: (i) exposure indices for population directly influenced by nitrous oxide, a representative pollutant, and (ii) a friction index between trips for attending elementary school and freight vehicle trips. It was found that from the perspective of physical distribution efficiency and traffic circulation, the "before" alternative is better than "after". However, from the aspect of traffic safety and environmental impacts the "after" alternative is better than "before". It is expected that the proposed evaluation method in this study would be useful when identifying reasonable policies for truck route management in urban areas.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.225-232
• /
• 2011

Reactive ion etching (RIE) technique for maskless surface texturing of mc-silicon solar wafers has been applied and succeed in fabricating a grass-like black-silicon with an average reflectance of $4{\pm}1%$ in a wavelength range of 300~1,200 nm. In order to investigate the optimized texturing conditions for mass production of high quantum efficiency solar cell Surface characteristics such as the spatial distribution of average reflectance, micrscopic surface morphology and minority carrier lifetime were monitored for samples from saw-damaged $15.6{\times}15.6\;cm^2$ bare wafer to key-processed wafers as well as the mc-Si solar cells. We observed that RIE textured wafers reveal lower average reflectance along from center to edges by 1% and referred the origin to the non-uniform surface structures with a depth of 2 times deeper and half-maximum width of 3 times. Samples with anti-reflection coating after forming emitter layer also revealed longer minority carrier lifetime by 40% for the edge compared to wafer center due to size effects. As results, mc-Si solar cells with RIE-textured surface also revealed higher efficiency by 2% and better external quantum efficiency by 15% for edge positions with higher height.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.135-146
• /
• 2007

FLDWAV model was modified such that it can adequately simulate the effect of Jamsil and Singok submerged weirs in the main reach of the Han River. The enhanced model combines weir-type discharge equations for overflow at fixed weir and Manning equation for fluvial-type flow at the movable weir. Equations for weir overflow include those for submerged weir flow and free overflow. Gates of the movable weir may be open or closed for the simulation. In order to test the simulation capabilities, the enhanced model was applied for various flow conditions at submerged weirs. Backwater effect due to Jamsil and Singok submerged weirs were well simulated. Simulations were carried out for spring and neap tides extracted from artificial tide generated by combining $M_2\;and\;S_2$ tidal constituents. Simulation results cleared indicated that tidal effect extends further upstream as the flood discharge decreases. Low flow simulation capabilities of the enhanced model was tested. Discontinuities of water surface elevation due to the submerged weirs were successively simulated.

• Journal of Microbiology
• /
• v.43 no.4
• /
• pp.345-353
• /
• 2005

The complex ecosystem of intestinal micro flora is estimated to harbor approximately 400 different microbial species, mostly bacteria. However, studies on bacterial colonization have mostly been based on culturing methods, which only detect a small fraction of the whole microbiotic ecosystem of the gut. To clarify the initial acquisition and subsequent colonization of bacteria in an infant within the few days after birth, phylogenetic analysis was performed using 16S rDNA sequences from the DNA iso-lated from feces on the 1st, 3rd, and 6th day. 16S rDNA libraries were constructed with the amplicons of PCR conditions at 30 cycles and $50^{\circ}C$ annealing temperature. Nine independent libraries were produced by the application of three sets of primers (set A, set B, and set C) combined with three fecal samples for day 1, day 3, and day 6 of life. Approximately 220 clones ($76.7\%$) of all 325 isolated clones were characterized as known species, while other 105 clones ($32.3\%$) were characterized as unknown species. The library clone with set A universal primers amplifying 350 bp displayed increased diversity by days. Thus, set A primers were better suited for this type of molecular ecological analysis. On the first day of the life of the infant, Enterobacter, Lactococcus lactis, Leuconostoc citreum, and Streptococcus mitis were present. The largest taxonomic group was L. lactis. On the third day of the life of the infant, Enterobacter, Enterococcus faecalis, Escherichia coli, S. mitis, and Streptococcus salivarius were present. On the sixth day of the life of the infant, Citrobacter, Clostridium difficile, Enterobacter sp., Enterobacter cloacae, and E. coli were present. The largest taxonomic group was E. coli. These results showed that microbiotic diversity changes very rapidly in the few days after birth, and the acquisition of unculturable bacteria expanded rapidly after the third day.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.180-191
• /
• 2013

The purpose of this research was to find an optimal quarrying for marble by analyzing the applicability and the work efficiency of a chain saw machine newly introduced in the underground Baekwoon mine. From the test results of the physical properties of Baekwoon marble, which affects the efficiency of rock cutting, it was found to have similar physical characteristics as the ones which are now being produced in the other areas in Korea. And especially it shows isotropic property, which can be thought to be advantageous as a dimensional stone. To check the long-term quality of the marble as a stone material, several tests such as corrosion resistance test and abrasion test were carried out. It was found to be vulnerable to acid rain with decrease of weight and seismic wave velocity after applying artificial rain at pH 5.6 for 50 times. The percentage of wear from abrasion test was 22.67%. The working time and cutting speed of the chain saw machine were recorded and analyzed during the test-run at the quarry. The overall work cycle was assorted into 9 unit operations and the operating time per each unit was drawn. The operating times for the two cutting patterns, which could be possibly applicable to the work site, were compared. The results indicated that the pattern B, that the cutting sequence was set to minimize the movement of the machine, showed 6% less working hours than the pattern A, which first cuts the outer boundary. With cutting pattern analysis, the ore body in the Baekwoon mine was 3 dimensionally modeled and a quarrying plan considering the existing conditions of the marble was suggested.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.153-164
• /
• 2009

This Paper presents the severity analysis result of the year 2006 national pedestrian crashes using the data base of 37,589 records prepared for the National Police Bureau. A set of attributing factors considered to affect pedestrian crash patterns were selected, and their contributing effects were investigated by applying the Ordered Logit Model. This model was selected because this model has been able to afford satisfactory results when the dependent variable involved ordered severity levels; fatal, injury, and property- damage-only in this investigation. The investigation has unveiled the followings; First, the pedestrian crash patterns were dependent upon human -drivel and pedestrian- characteristics including gender, age, and drinking conditions. Second, other contributing factors included vehicle, roadway geometric, weather, and hour of day characteristics. Third, seasonal effect was not contributive to crash patterns. Finally, the application of the Ordered Logit Model facilitated the ordered severity level analysis of the pedestrian crash data. This paper concludes that conventional wisdom on the pedestrian crash characteristics is largely truthful. However, this conclusion is limited only to the data used in this analysis, and further research is required for its generalization.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.70-76
• /
• 2017

Objectives: This on-site study was performed to evaluate the reduction efficiency of an air cleaner on particulate matters and biological agents in a swine facility. Materials and Methods: Particulate matter was measured using a real-time monitoring recorder and biological agents were sampled with a one-stage impactor and then analyzed based on the microbial culture method. An experimental process for the reduction effect on airborne pollutants through air cleaner operation consisted of three conditions: no treatment, wet scrapper by water spray and wet scrapper by disinfectant spray. Results: Geometric mean levels of particulate matter(TSP, $PM_{10}$, $PM_{2.5}$ and $PM_1$) were presented at $1,608{\mu}g/m^3$, $1,373.8{\mu}g/m^3$, $401.8{\mu}g/m^3$ and $144.5{\mu}g/m^3$ for no treatment; $1,503{\mu}g/m^3$, $1,017{\mu}g/m^3$, $159.4{\mu}g/m^3$ and $69.8{\mu}g/m^3$ for wet scrapper by water spray; and $1,222.17{\mu}g/m^3$, $477.17{\mu}g/m^3$, $33.2{\mu}g/m^3$ and $11.1{\mu}g/m^3$ for wet scrapper by disinfectant spray, respectively. In the case of biological agents, the geometric averaged concentrations of total airborne bacteria and fungi were as follows: $45,371cfu/m^3$ and $13,474cfu/m^3$ for no treatment, $43,286cfu/m^3$ and $8,610cfu/m^3$ for wet scrapper by water spray, and $2,440cfu/m^3$ and 1,867 cfu/ for wet scrapper by disinfectant spray, respectively. Regardless of particulate matter and biological agent, the highest concentrations were found for no treatment, while the lowest concentrations were found with wet scrapper by disinfectant spray. Conclusions: Based on the results obtained from this on-site evaluation, there was a significant reduction effect on particulate matter and biological agents through the application of an air cleaner in this study.

• Communications of Mathematical Education
• /
• v.31 no.1
• /
• pp.49-70
• /
• 2017

The purpose of this study was to investigate the relative influence of multiple error sources and to find optimal measurement conditions that obtain a desired level of reliability of a creative attitude test in mathematical creativity. This study analyzed the scores of the Creative Attitude Scale-Korea allowed to access publicly of 125 general students and 109 mathematically gifted students by performing a multivariate generalizability analysis. The main results were as follows. First, based on reliability, the Creative Attitude Scale-Korea was measured less precisely for mathematically gifted students. On the contrary, based on the conditional standard error of measurement, it was measured less precisely for general students. However, the Creative Attitude Scale-Korea showed strong reliability in both groups. Second, the optimal weights should adjust to .3, .3, .4 in mathematically gifted students and .4, .4, .2 in general students with three scoring components of divergent attitude, problem solving attitude, and convergent attitude based on the maximum reliability. Third, to approach desirable reliability, it is possible to use one component of divergent attitude in general students but three components of divergent attitude, problem solving attitude, and convergent attitude in mathematically gifted students. Finally this study proposed application plans for the Creative Attitude Scale-Korea and future directions of research.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.864-871
• /
• 2006

In the development of electricity generating wind turbines for wind farm application, only two types have survived as the methods of power regulation; stall regulation and full span pitch control. The main purpose of this paper is to experimentally identify the characteristics of noise emission of wind turbines according to the power regulation types. The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from each of 1.5 MW and 660 kW wind turbines (WT) utilizing the stall regulation and the pitch control for the power regulation, respectively. Apparent sound power level, wind speed dependence, third-octave band levels and tonality are evaluated for both of WTs. It is observed that equivalent continuous sound pressure levels (ECSPL) of the stall control type of WT continue to increase with increasing wind speed whereas those of the pitch control type of WT show less correlation with wind speed. These observed characteristics are believed to be due to the different airflow patterns around the blade between the stall regulation and the pitch control types of WT; the airflow on the suction side of blade in the stall types of WT are separated at the high wind speed. It is also found that the 1.5 MW WT using the stall control emits lower sound power than 660 kW one using the pitch control at wind speeds below 8m/s, whereas sound power of the former becomes higher than that of the latter in the wind speed over 8m/s. This wind-speed dependence of sound power leads to the very different noise omission characteristics of WTs depending on the seasons because the average wind speed in summer is lower than 8m/s whereas that in summer is higher. Based on these experimental observations, it is proposed that, in view of environmental noise regulation, the developer of wind farm should give enough considerations to the choice of power regulation of their WTG based on the weather conditions of potential wind farm locations.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.412-421
• /
• 1992

The superconducting thin films have shown a growing possibility for practical application in microelectronic fields in recent years. In this study, the high Tc superconducting Y-Ba-Cu-O thin films were prepared on various substrates by chemical vapor deposition method using organic metal chelates of $Y(thd)_3$, $Ba(thd)_2$, and $Cu(thd)_2$ as source materials. The deposition reactions were carried out on single crystalline MgO(100), YSZ(100), $SrTiO_3(100)$, and polycrystalline $SrTiO_3$ substrates. Deposition thickness of thin films was linearly increased with the increase of deposition time. It turned out that the Y-Ba-Cu-O thin films on MgO(100), YSZ(100), and $SrTiO_3(100)$ single crystal substrates showed superconductivities above liquid nitrogen temperature($T_{c,onset}=87{\sim}89K$, $T_{c,zero}=85{\sim}86K$), but the one on polycrystalline $SrTiO_3$ substrate did not.