• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.950-962
• /
• 2013

The purpose of this study was to develop the slim-fit dress shirt pattern. Among the published educational patterns, there were four patterns based on similar design and silhouette with slim-fit dress shirts. Then, the drafting method of those patternsBB were compared and analyzed. The subjects for wearing evaluation were three 20 to 39 aged average-sized men. After the wearing evaluation(5 Likert point scale), N pattern had been chosen as the final comparison pattern because it received the highest points. The slim-fit shirt pattern was developed based on the result of wearing evaluation. The foundation design were as following: shirt length (Stature/2-12), back length (Stature/4), armhole depth (Chest/4+1), width (Chest/4+3), Interscye; Back (Chest/6+5), Interscye; Front (Chest/6+4), width of the nape of neck (Neck/6+1=◎), height of the nape of neck (◎/3), of the front neck (◎-0.5), depth of the front neck(◎+1.5). After the wearing evaluation about researched pattern and N pattern, researched patternsBB scale points were bigger than N pattern and there were slight differences. The scale points for N patternsBB movement evaluation showed highest points on all contents. Therefore, the researched pattern is suitable for the original form of slim-fit dress shirt. The new dress shirt pattern reflected the slim-fit trend in the research expected to help educational environment and industrial site.

• 한국의상디자인학회지
• /
• 제16권2호
• /
• pp.15-29
• /
• 2014

Setting the ease amount takes the important part to the fit that consumers satisfies. Therefore, it is required to create a pattern for off-the-rack jackets that considers the proper amount of ease. However, few studies have been done previously regarding the ease amount of jacket pattern for the women in their 20s whose demand for jacket is high and who are sensitive to the fit. Therefore, this study selected top five brands in terms of sales and preference among the national female apparel brands. It obtained a tailored jacket pattern for basic size (55 size) and made the jacket. Then, an expert panel group put the pattern on Hani body, a torso dummy for education made by the anthropometric data of Size Korea for females in their 20s and conducted an evaluation on the ease amount and analyzed the results. As a result, the ease amount of the Pattern A was evaluated as proper and that of the Pattern B was found to be lease proper. From the fact, we can see that each of the top 5 off-the-rack brands has different ease amount, though they are of the same basic size (55 size).

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.336-345
• /
• 2019

This study evaluated the preference and wearing characteristics of existing fitness compression wear for elderly women and identified the problems and improvements of existing fitness apparel. Preference and wearing characteristics for 6 types (A-F) of upper and lower fitness compression wear were evaluated. Photos and drawings as well as the preferred designs and details were investigated after presenting the evaluation clothing. Evaluations were made on a 5 point Likert scale for the fitness, allowance, pressure, ease of movement, fabric material, and overall satisfaction after wearing. The design preference indicated that B type (26.6%) and C type (23.4%) were preferred in the top with C, E and F type preferred to the same ratio of 19.4% in the slacks. The fitness and allowance amount of the top B type were the most appropriate (${\geq}4$), the C type was in close contact (2.86), and the F type was inadequate in the neck circumference (1.77). The feeling of pressure was high in the waist, abdomen, thighs, and knees. The area where the elderly people want to improve their strength was the legs; in addition, a pattern design was needed to strengthen leg muscles when designing fitness compression wear. However, a design with excessive adhesion due to a muscle support band was shown to be not preferred. Therefore, depending on the activity, it is necessary to develop a fitness compression wear that applies an optimum stretching ratio of fabric based on body surface area changes.

• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.89-101
• /
• 2011

The economy blocking and price competitiveness caused by globalization has generated an on-going controversy of global sourcing among high-priced luxury brands. The consumers in the global market purchase luxury goods based on both craftsmanship and the reputation of luxury brands. Factors such as the origin, brand and pricing can affect the intention of consumers to buy luxury goods. This study analyzed the optimum brand combination using conjoint analysis. The analysis was based on the selection of origin, brand name and price as extrinsic factors among attributes of customer choice. These factors were subdivided into Italian and Chinese origins, Gucci, Prada, and Miu Miu in terms of brand names, and 450,000, 750,000, and 1,500,000 Won in terms of price levels. The result showed that origin was considered the most important factor followed by brand name and pricing. This tendency tells us that customers consider origin, brand name and price in that order when purchasing luxury brands. In regards to each factor, respondents preferred Italian to Chinese origins, the Gucci to Miu Miu brand name, and 750,000 to 450,000 won for price level. Generally, women in their 20s and 30s preferred products from advanced nations at a medium-level price.

• The International Journal of Costume Culture
• /
• 제3권1호
• /
• pp.30-40
• /
• 2000

The purpose of this research was to device thermal comfort model for radiation power plant workers in protective clothing. Three fabrics commonly used in protective workwear were made into coveralls of identical design and were evaluated by adult healthy males in four simulated work environment. It was investigated between the physiological response and subjects comfort according to environmental variance and clothing types. The of simulated work enviro mensent was controlled under four different humidity and temperature of each type. (Temperature 20±1℃, RH 40∼70%±5%, Temperature 30±1℃, RH 40∼70%±5%) An index of physiological response was connected with the thermal comfort designed. Mean skin temperature, skim temperature, Axillasy temperature ear canal temperature, clothing climate, total sweat, blood pressure, and R-R interval were be evaluated. Skin temperature difference ocurring during exercise and rest were significant only with respect to time and regions of the body, This despite physical differences in the three coveralls, particulary mass statistically experiment. Also, an index of subject wearing sensation was designed for thermal comfort after investigation determined the kind of clothes and the type of environment. As a result of this research, two types of multiple regressions was deviced to estimate thermal comfort of the protective clothing.

• 한국의류학회지
• /
• 제34권6호
• /
• pp.955-968
• /
• 2010

Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

• 한국의류학회지
• /
• 제36권1호
• /
• pp.68-83
• /
• 2012

This study suggests a Korean fashion design education model through a comparison of the fashion design curriculum and education systems in the USA, Europe, and Korea. For this, a case study of fashion design curriculum and education systems in the USA was performed with literature reviews about education methodology and design process to develop creativity, following the prior study, A Comparative Study on Fashion Design in Europe and Korea. For the case study, 12 superior fashion design education institutions in the USA were chosen from fashionista (N.Y.) and the goals, the emphases, the constitution of the online curriculum of each undergraduate fashion design course were examined. As a result of this study, Korean fashion design education model (1+2.5+0.5 model), was proposed by integrating the education systems of the USA and Europe, as follow: First, Korean fashion design education institutions need to be characterized and the departments/majors should be gradually specialized by the major. Second, foundation courses prior to undergraduate courses or during the 1st year should be established to result in a multi- disciplinary basic education. Third, a project based major needs to be performed that connects fashion design subjects with their related subjects for 2 and a half years as of the $2^{nd}$ year. These projects can be progressed by problem-solving design process of problem-identification and brainstorming-research, analysis-design concept-design ideation, selection-design development, implementation-critical evaluation and solutions. Fourth, collaborative projects or integrated courses with related Liberal Arts or other art and design majors should lead to muliti-discilplinary education. Fifth, the chance of increased active industry-academy collaboration and actual employment or enterprise can be facilitated by the establishment of only the courses related to domestic or international internships during the $2^{nd}$ semester of the $4^{th}$ year.

• 복식문화연구
• /
• 제18권3호
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.

• 한국의류학회지
• /
• 제25권10호
• /
• pp.1754-1762
• /
• 2001

본 연구의 목적은 적합성과 기능성이 고려된 체형별 남성 상의 원형 패턴을 개발하는데 있다. 피험자는 인체계측자료와 측면체형 사진에 의해 선정하고, 체형은 굴신체형, 표준체형, 반신체형으로 분류하였다. 체형별 실험 원형 패턴의 평가를 위하여 기존원형을 선정하였으며, 연구 결과는 다음과 같다; 1. 착의평가 결과 표준체형은 대부분의 항목에서 적합하였으나, 굴신체형과 반신체형에서는 많은 차이가 있었다. 이러한 차이는 앞길이와 등길이 뿐만 아니라 여유량과 윗 가슴둘레에 서 나타난다. 앞품과 뒤품은 외관에 의해 많은 영향을 받으며, 증가된 옆품은 앞품과 뒤품의 부족분을 보충하는 역할을 하였다. 따라서 실험패턴은 기존패턴보다 각 체형에 더욱 적합하며, 체형 적합성과 동작기능성이 고려된 의복 제작을 위한 패턴설계는 인체의 구조와 동작연구에 의해 가능하였다. 2. 기본원형 패턴 설계를 위한 필요치수는 목뒤높이, 등길이, 앞길이, 윗 가슴둘레, 앞품과 뒤품이며, 체형분류의 기준은 윗 가슴둘레, 앞품, 뒤품, 앞길이, 등길이이다. 이와 같은 결과를 근거로 가슴둘레 선은 [(B/2+B/10), 뒤진동깊이는 [(B/10+목뒤높이/10)]로 설정하고, 앞내림은 1.5cm로 하였다.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.101-113
• /
• 2016

This study was conducted in order to analyze draping and flat pattern according to jacket design, and provide basic materials for developing a jacket pattern that can enhance fitness, functionality, and aesthetic expression of clothes by reflecting esthetic expression of draping and efficiency of flat pattern at the same time. For the experimental jacket designs of a one-piece sleeve jacket and a two-piece sleeve jacket were selected among the entries of the designer Rubina for 2014 F/W Seoul Fashion Week. Designer brand Rubina usually produced clothes using draping and the designer brand company provided the experimental patterns for the study. We also had flat patterns of the same design and size specifications designed by a flat patternmaker who has 30 year-experience in flat pattern like Rubina. The test apparel jacket was made of 20's cotton yarns. Three models wore the jackets and evaluation on appearance fitness was conducted by 7 members in an expert panel group from August 10, 2015 to September 10, 2015. As a result of appearance fitness analysis on one-piece sleeve jacket, there were significant difference in 4 items among 17 items in terms of overall appearance. The appearance of jackets by draping had higher score than those using flat pattern. As for two-piece sleeve jacket, there were significant differences in 7 items among 17 items related to overall appearance. As for the items related to sleeve, 5 items out of 13 showed significant differences. Except for one item, appearance of jackets using draping had higher score than flat pattern. As for motion fitness, draping was evaluated to be more comfortable. Applying the items with high scores in appearance and motion fitness in draping to flat pattern, The study suggests a new jacket pattern development that would increase the satisfaction of consumers for future research.