• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1415-1419
• /
• 2008

In this paper, we investigate various Audio Transmission Systems to implement Audio Transmission System based on AoIP of Internet transmission technology TCP/IP Network and we design and implement a Audio transmission system based on AoIP by adopting the most efficient one. The implemented system can be applied for various professional audio systems with large-scale audio distribution network as well as small-scale PA systems. Moreover, this can be applied in various fields which need audio transmission.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.59-64
• /
• 2023

Fire and disaster broadcasting systems are divided into analog, digital, and network-based digital public address systems, and important specifications in network-based digital public address systems are low-latency audio, high sampling rate, and multi-channel input and output. In the past, it has been widely used to the AoE method for distinguishing based on the MAC address of the data link layer. However, this method has a problem of increasing complexity and cost. This proposal is an AoIP/UDP method, which allows communication to be easily distinguished by IP address without the need for a separate redundant network, so that the network can be freely used and configured, and cost can be reduced by reducing complexity. After implementing the AoIP/UDP method, the experimental results showed that the cost was improved with the equivalent performance with 2.66ms latency.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.51-58
• /
• 2017

Recently, rapid advances of Ethernet and IP technology have brought many changes in the sound industry. In addition, due to AoIP-based audio transmission technology, various problems of the acoustic system (sound quality deterioration due to long distance transmission, complicated wiring) have improved dramatically. However, when many distributed audio systems are connected with AoIP equipment, if there is a problem in the equipment, it is impossible to operate the connected system. AoIP equipment only can transmit audio signals but cannot adjust the system for acoustic environment. In this paper, AoIP equipment is to be installed with sound equipment on a one-to-one basis, so that various existing problems can be solved and adjustment of sound quality (reverberation, echo, delay and EQ) can be possible by AoIP-based OAC (On-site Audio Center) with built-in DSP function. As a result, uncompressed real-time transmission by distributed transmission/receipt module in OAC (On-site Audio Center) and high quality sound by adjustment of sound quality with built-in DSP can be acquired. It is expected that OAC based sound system will be the industry standard in ubiquitous environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2165-2170
• /
• 2008

In this parer, it is implemented a Local distribution Audio System, based on AoIP(Audio over Internet Protocol) of a part of TCP/IP Network which belongs to Internet transmission technology. The system is controlled based on SNMP(Simple Network Management Protocol) and it is transferred to UDP as packet after changing from Analog audio sources to Digital audio sources. The implemented Local distribution Audio System have presented practical possibilities in PA system transmitting various audio sources to several areas, dispersedly and using multichannel audio like Home theaters in the limelight, recently.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2017

Recently, the development of the information communication industry has made many changes in the industrial acoustic industry. Especially, it has a great influence on the change of system and equipment of acoustic system. Analog equipment is changing to digital equipment, and integrated control equipment makes it easier to operate and manage the sound system. However, the integrated control system currently on the market is only controllable for some devices. In this paper, we propose a new AoIP - based system configuration method, which enables the operation status monitoring, unmanned operation and self - diagnosis of equipment. As a result of the study, it is confirmed that the proposed system can be operated, monitored, and self - diagnosed at remote sites. It is expected that an AoIP- based sound system will be the industry standard in the future.

• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.108-117
• /
• 2022

The recent development of information and communication technology has a great impact on the audio/video industry. In particular, IP-based AoIP transmission technology and AVB technology are making changes in the audio/video market. Video signal transmission technology has been introduced to the market through a network, but it has not replaced the video switcher function. Video signals in the conference room or classroom are still controlled by the switching device. In order to switch input/output video devices, a cable that is not limited by distance must be connected to the switcher. In addition, the control of the switching device must be performed by a person who has received professional training. In this paper, it is a technology that can be operated even by non-experts by replacing complex video cables (RGB, DVI, HDMI, DP) with LAN cables and enabling IP-based video switching and transmission (Video Mirroring over IP: VMoIP) to replace video switcher equipment. We are going to do this study, I/O videos were controlled in the form of matrix and high-definition videos were transmitted without distortion, and VMoIP is expected to become the standard for video switching systems in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1167-1170
• /
• 2007

This paper introduces a data storage transport protocol internet Advanced Technology Attachment (iATA) for ATA storage devices that can be accessed over (TCP/IP) networks. As the access speed of Advanced Technology Attachment (ATA) type storage is increasing, the importance of sharing the ATA type storages over internet is also increasing. We are proposing a protocol in which we have implemented the basic ATA command set to access the ATA type remote storage devices over the TCP/IP networks.In this paper, we give basic details of the protocol and discuss the existing storage protocols which are mainly used for accessing block storage like internet Small Computer System Interface (iSCSI) Hyper Small Computer System Interface (HyperSCSI) and ATA over Ethernet (AoE).

• Ocean and Polar Research
• /
• v.43 no.1
• /
• pp.15-30
• /
• 2021

In this study, using 16 ORA-IP (Ocean Reanalysis Intercomparison Project) data, we investigated spatial and temporal changes of net surface heat flux in the East Asian seas and presented a new ensemble net surface heat flux index. The ensemble net surface heat flux index is produced considering the data distribution and the standard deviation of each ORA-IP. From the correlation analysis with air temperature averaged over the Korean Peninsula, ensemble net heat flux around the Korea Strait shows the highest correlation (0.731) with a 3 month time lag. For the correlation study regarding precipitation over the Korean Peninsula, it also shows significant correlation especially in winter and spring seasons. Similar results are also found in comparison with climate indices (AO, PDO, and NINO3.4), but ensemble net surface heat flux data in winter season reveals the strongest correlation patterns especially with winter temperature and spring precipitation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.6
• /
• pp.460-471
• /
• 2004

Since the RTP is suitable for real-time data transmission in multimedia services like VoD, AoD, and VoIP, it has been adopted as a real-time transport protocol by RTSP, H.323, and SIP. Even though the RTP protocol stack for embedded systems has been in great need for efficient support of multimedia services, such a stack has not been developed yet. In this paper, we explain embeddedRTP which supports the RTP protocol stack at the kernel level so that it is suitable for embedded systems. Since embeddedRTP is designed to reside in the UBP module, existing applications which rely ell TCP/IP services can proceed the same as before, while applications which rely on the RTP protocol stack can request HTP services through embeddedRTp API. EmbeddedRTP stores transmitted RTP packets into per session packet buffer, using the packet's port number and multimedia session information. Communications between applications and embeddedRTP is performed through system calls and signal mechanisms. Additionally, embeddedRTP API makes it possible to develop applications more conveniently. Our performance test shows that packet-processing speed of embeddedRTP is about 7.5 times faster than that oi VCL RTP for multimedia streaming services on PDA in spite that its object code size is reduced about by 58% with respect to UCL RTP's.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2023

A public address (PA) system installed in a building is a system that delivers alerts, announcements, instructions, etc. in an emergency or disaster situation. As for the products used in PA systems, with the development of information and communication technology, PA products with various functions have been introduced to the market. PA systems recently launched in the market may be connected through a single network to enable efficient management and operation, or use voice recognition technology to deliver quick information in case of an emergency. In addition, a system capable of locating a user inside a building using a location-based service and guiding or responding to a safe area in the event of an emergency is being launched on the market. However, the new PA systems currently on the market add some functions to the existing PA system configuration to make system operation more convenient, but they do not change the complex PA system configuration to reduce facility costs, maintenance, and management costs. In this paper, we propose a novel PA system configuration for buildings using audio networks and control hierarchy over peer-to-peer (Anchor) technology based on audio over IP (AoIP), which simplifies the complex PA system configuration and enables convenient operation and management. As a result of the study, through the emergency signal processing algorithm, fire broadcasting was made possible according to the detection of the existence of a fire signal in the Anchor system. In addition, the control device of the PA system was replaced with software to reduce the equipment installation cost, and the PA system configuration was simplified. In the future, it is expected that the PA system using Anchor technology will become the standard for PA facilities.