• 한국의료질향상학회지
• /
• 제7권2호
• /
• pp.138-155
• /
• 2000

3차 의료기관 응급의료센터의 총 진료소요시간을 단축하여 업무의 효율성을 높이고 환자적체를 해소하는 방안을 마련하기 위하여 l997년 4월 1개월 동안 대구광역시 소재 영남대학교병원 응급의료센터 내원환자 1,742명을 대상으로 환자의 특성, 응급진료와 관련된 내용 및 응급진료시간, 그리고 상호관련성을 분석하였다. 평균 초진소요시간은 83.3분이었고, 남자 83.1분, 여자 84.9분여였으며, 평균 총 진료소요시간은 전체 698분이었고, 남자 718.0분 여자 670.5분이었다. 총 진료소요시간은 고령일수록 증가하였으며 의료보호환자에서 초진 및 퇴실시간이 가장 많이 소요되었고 산재환자는 가장 적게 소요되었다. 전원시 소견서를 구비하지 않은 경우에 초진소요시간어이 많았으며, 총 진료소요시간은 외래어에서 전과된 경우, 타병원으로부터 전원된 경우, 전원시 소견서를 구비한 경우와 OCS를 부분적으로 사용한 경우에 많았다. 약물중독환자, 심폐소생술을 시행한 환자, 내과환자 수혈을 받은 환자 및 복합진료 여부가 3개과 이상이었던 환자에서 총 진료소요시간이 많았으며 당직인턴수가 4명이었던 경우가 총 진료소요 시간이 5명이었던 경우에 비해 더 많이 걸렸다. 입원한 경우, 입원명령후 공실이 없었던 경우에서 역시 총 진료소요시간이 증가하였으며 총 진료소요시간과 유의한 상관관계를 갖는 연속변수로는 환자의 연령, 방사선검사수 및 일반검사수였다. 초진소요시간에 대한 중회귀분석결과, 응급의학과 환자, 응급환자, 내원시 심폐소생술 시행환자유무, 내원시 기관내삽관 여부 등이 유의한 독립변수였다. 총 진료소요시간에 대한 중회귀분석결과, 공실유무, 일반검사수, 최종진료과, 타병원 전원유무, 방사선검사수, 퇴원약 유무, 입원실 종류, 입원유무, 담당전공의 연차, 내원원인, 내원시 심폐소생술 시행환자 유무, 수술여부, 병원직원 지인유무 및 특수검사수가 유의한 독립변수였다. 이상의 결과로 보아 응급의료센터내의 환자적체현상을 해결하기 위한 방안으로는 응급환자와 비응급환자를 분류하는 제도적 장치가 필요하며, 필수적인 경우에 한해 일반검사 및 방사선검사를 실시하도록 하며, 병동내의 과별 지정병상을 유동적으로 운영하여 응급의료센터 환자가 우선적으로 입원될 수 있도록 각과의 협조가 필요할 것으로 사료된다.

• 마케팅과학연구
• /
• 제17권4호
• /
• pp.23-49
• /
• 2007

본 연구는 영업사원의 통제유형(긍정적/부정적 결과통제, 긍정적/부정적 행동통제)과 직무만족 간의 관계에서 결과/행동관련 역할명확성과 자기효능감을 매개변수로 도입하여 이들 연구단위들 간의 구조적 관계를 조사하는 것이다. 제약업계 영업사원들로부터 수집된 자료를 통한 실증분석 결과는 다음과 같다. 첫째, 영업사원에 대한 통제유형이 역할명확성에 미치는 영향을 조사한 결과, 긍정적/부정적 결과통제는 모두 결과관련 역할명확성에 정(正)(+)의 영향을 미치는 것으로 나타났으며, 긍정적 행동통제도 행동관련 역할명확성에 정(正)(+)의 영향을 미치는 것으로 나타났다. 그러나 부정적 행동통제는 행동관련 역할명확성에 영향을 미치지 않는 것으로 나타났다. 둘째, 영업사원에 대한 통제유형이 자기효능감에 미치는 영향을 조사한 결과, 긍정적 결과통제는 자기효능감에 정(正)(+)의 영향을 미치는 것으로 나타났지만, 긍정적 행동통제는 자기효능감에 영향을 미치지 않는 것으로 나타났다. 또한 부정적 결과통제와 부정적 행동통제는 각각 결과관련 역할명확성과 행동관련 역할명확성의 매개를 통해 자기효능감에 영향을 미치는 것으로 나타났다. 셋째, 역할명확성이 자기효능감과 직무만족에 미치는 영향을 조사한 결과, 결과관련 역할명확성과 행동관련 역할명확성은 모두 자기효능감에 정(正)(+)의 영향을 미치는 것으로 나타났다. 또한 행동관련 역할명확성은 직무만족에 정(正)(+)의 영향을 미치는 것으로 나타났으나 결과관련 역할명확성은 영향을 미치지 않는 것으로 나타났다. 끝으로, 자기효능감이 직무만족에 미치는 영향을 조사한 결과, 자기효능감은 직무만족에 영향을 미치지 않는 것으로 나타났다. 본 연구의 결론에서는 결과의 요약, 시사점, 한계점, 그리고 미래연구를 위한 제언을 제시하였다.

• 대한간호학회지
• /
• 제2권1호
• /
• pp.3-33
• /
• 1971

Nursing of today has as one of its objectives the solving of problems related to human needs arising from the demands of a rapidly changing society. This nursing objective, I believe, can he attained by the appropriate application of scientific principles in the giving of comprehensive nursing care. Comprehensive nursing care may be defined as nursing care which meets all of the patient's needs. the needs of patients are said to fall into five broad categories: physical needs, psychological needs, environmental needs, socio-economic needs, and teaching needs. Most people who become ill have adjustment problems related to their new situation. Because patient teaching is one of the most important functions of professional nursing, the success of this teaching may be used as a gauge for evaluating comprehensive nursing care. This represents a challenge foe the future. A questionnaire consisting of 67 items was distributed to 200 professional nurses working ill direct patient care at Yonsei University Medical Center in Seoul, Korea. 160 (80,0%) nurses of the total sample returned completed questionnaires 81 (50.6%) nurses were graduates of 3 fear diploma courser 79 (49.4%) nurses were graduates of 4 year collegiate nursing schools in Korea 141 (88,1%) nurses had under 5 years of clinical experience in a medical center, while 19 (11.9%) nurses had more than 5years of clinical experience. Three hypotheses were tested: 1. “Nurses had high levels of concept and knowledge toward patient teaching”-This was demonstrated by the use of a statistical method, the mean average. 2. “Nurses graduating from collegiate programs and diploma school programs of nursing show differences in concepts and knowledge toward patient teaching”-This was demonstrated by a statistical method, the mean average, although the results showed little difference between the two groups. 3. “Nurses having different amounts of clinical experience showed differences in concepts and knowledge toward patient teaching”-This was demonstrated by the use of a statistical method, the mean average. 2. “Nurses graduating from collegiate programs and diploma school programs of nursing show differences in concepts and knowledge toward patient teaching”-This was demonstrated by a statistical method, the mean average, although the results showed little difference between the two groups. 3. “Nurses having different amounts of clinical experience showed differences in concepts and knowledge toward patient teaching”-This was demonstrated by the use of the T-test. Conclusions of this study are as follow: Before attempting the explanation, of the results, the questionnaire will he explained. The questionnaire contained 67 questions divided into 9 sections. These sections were: concept, content, time, prior preparation, method, purpose, condition, evaluation, and recommendations for patient teaching. 1. The nurse's concept of patient teaching: Most of the nurses had high levels of concepts and knowledge toward patient teaching. Though nursing service was task-centered at the turn of the century, the emphasis today is put on patient-centered nursing. But we find some of the nurses (39.4%) still are task-centered. After, patient teaching, only a few of the nurses (14.4%) checked this as “normal teaching.”It seems therefore that patient teaching is often done unconsciously. Accordingly it would he desirable to have correct concepts and knowledge of teaching taught in schools of nursing. 2. Contents of patient teaching: Most nurses (97.5%) had good information about content of patient teaching. They teach their patients during admission about their diseases, tests, treatments, and before discharge give nurses instruction about simple nursing care, personal hygiene, special diets, rest and sleep, elimination etc. 3. Time of patient teaching: Teaching can be accomplished even if there is no time set aside specifically for it. -a large part of the nurse's teaching can be done while she is giving nursing care. If she believes she has to wait for time free from other activities, she may miss many teaching opportunities. But generally proper time for patient teaching is in the midmorning or midafternoon since one and a half or two hours required. Nurses meet their patients in all stages of health: often tile patient is in a condition in which learning is impossible-pain, mental confusion, debilitation, loss of sensory perception, fear and anxiety-any of these conditions may preclude the possibility of successful teaching. 4. Prior preparation for patient teaching: The teaching aids, nurses use are charts (53.1%), periodicals (23.8%), and books (7.0%) Some of the respondents (28.1%) reported that they had had good preparation for the teaching which they were doing, others (27.5%) reported adequate preparation, and others (43.8%) reported that their preparation for teaching was inadequate. If nurses have advance preparation for normal teaching and are aware of their objectives in teaching patients, they can do effective teaching. 5. Method of patient teaching: The methods of individual patient teaching, the nurses in this study used, were conversation (55.6%) and individual discussion (19.2%) . And the methods of group patient teaching they used were demonstration (42.3%) and lecture (26.2%) They should also he prepared to use pamphlet and simple audio-visual aids for their teaching. 6. Purposes of patient teaching: The purposes of patient teaching is to help the patient recover completely, but the majority of the respondents (40.6%) don't know this. So it is necessary for them to understand correctly the purpose of patient teaching and nursing care. 7. Condition of patient teaching: The majority of respondents (75.0%) reported there were some troubles in teaching uncooperative patients. It would seem that the nurse's leaching would be improved if, in her preparation, she was given a better understanding of the patient and communication skills. The majority of respondents in the total group, felt teaching is their responsibility and they should teach their patient's family as well as the patient. The place for teaching is most often at the patient's bedside (95.6%) but the conference room (3.1%) is also used. It is important that privacy be provided in learning situations with involve personal matters. 8. Evaluation of patient teaching: The majority of respondents (76.3%,) felt leaching is a highly systematic and organized function requiring special preparation in a college or university, they have the idea that teaching is a continuous and ever-present activity of all people throughout their lives. The suggestion mentioned the most frequently for improving preparation was a course in patient teaching included in the basic nursing program. 9. Recommendations: 1) It is recommended, that in clinical nursing, patient teaching be emphasized. 2) It is recommended, that insertive education the concepts and purposes of patient teaching he renewed for all nurses. In addition to this new knowledge, methods and materials which can be applied to patient teaching should be given also. 3) It is recommended, in group patient teaching, we try to embark on team teaching.

• Tuberculosis and Respiratory Diseases
• /
• 제41권5호
• /
• pp.504-512
• /
• 1994

연구배경 : 간경화 환자에서 심질환 또는 폐질환이 동반되지 않으면서 심각한 저산소혈증이 발생할 수 있다는 사실은 이미 오래전부터 알려져 있는 사실이다. 그 원인으로서 폐혈관 장애를 초래하는 것이 주된 역할을 하는 것으로 알려져 있는데 그 중에서도 특히 폐혈관 확정에 의한 폐내단락이 가장 중요한 기전으로 제시되고 있다. 폐내단락은 전모세혈관 수준에서 폐내혈관확장이 발생하거나 직접적인 동정맥 교통에 의해서 발생하는데 간경화 환자에서 흔히 관찰되는 피부 소견인 거미상 혈관종과 관련성이 있다. 이러한 폐내 모세혈관의 확장으로 인해 중심 혈류 속도가 빨라지고 모세혈관 통과 속도가 증가하여 결국은 폐확산 장애가 초래되는데 이러한 효과는 심박출량이 증가하는 과운동성 순환을 나타내는 간경화의 혈류학적 특성과 상승작용을 유발하여 저산소혈증이 발생한다. 또한 앙아위에서 기립자세로 체위변화를 하면 폐기저부위에서 중력에 의한 혈류량이 증가하여 폐내단락 효과가 배가되어 저산소혈증이 더욱 악화되므로 기립성 탈산소증과 편평호흡이 발생할 수도 있다. 그러나 이러한 소견들은 주정성 간경화와 원발성 담즙성 간경화를 주로하는 구미에서의 결과이고, B형간염과 이로 인한 간경화 및 간암의 유병율과 사망률이 세계적으로 가장 높은 우리나라에서는 이에 대한 연구가 거의 없는 실정이다. 이에 저자들은 후괴사성 간경화가 대종을 이루는 국내 간경화 환자에서의 저산소혈증과 기립성 탈산소증의 빈도를 조사하고 그 기전으로서 폐내단락의 중요성을 확인하기 위해 본 연구를 시행하였다. 방법 : 간경화 환자 중에서 심폐질환의 증거가 없고 복수, 상부위장관 출혈, 간성 혼수등과 같은 심한 합병증의 현증이 없는 비교적 안정상태에 있는 48명을 대상으로 하여 앙아위와 기립시 동맥혈분석검사를 시행하여 저산소혈증과 기립성 탈산소증의 빈도를 조사하고, 그 결과에 따라 저산소혈증군과 정상산서혈증군으로 분류하여 각각 폐기능검사 및 폐내단락율을 측정하기 위한 Tc-99m-MAA 주사를 실시하였다. 폐내단락율 계산은 뇌와 좌우신장의 혈류량은 전신 혈류량의 32%인 점을 기준하여 뇌와 좌우신장에서 측정된 방사성 계수를 전신 방사성 계수로 환산하고 이 값을 좌우폐의 방사성 계수와 합산한 후 이에 대한 전신 방사성 계수의 비율을 계산함으로써 결정하였다. 결과 : 동맥혈산소분압 80 mmHg 미만의 저산소혈증은 9명에서 관찰되어 18.8%의 빈도를 보였고 10 mmHg 이상의 기립성 탈산소증은 8명에서 관찰되어 16.7%의 빈도를 보였으나 동맥혈산소분양 60 mmHg 미만의 심각한 저산소혈증은 관찰되지 않았다. 동맥혈 산소분압은 거미상 혈관종이 관찰되는 환자군에서 유의하게 낮았으며 혈청학적 표지자와 간경화의 심한 정도를 반영하는 간기능검사 수치와는 유의한 상관관계는 없었다. 저산소혈증군과 정상산소혈증군으로 분류하여 시행한 폐기능검사 소견상 양군간에 유의한 차이는 없었으며 Tc-99m-MAA 전신주사를 이용한 폐내단락율은 저산소혈증군에서 $11.4{\pm}4.1%$로서 정상산소혈증군의 $4.1{\pm}2.0%$보다 유의하게(p<0.05) 높은 결과를 나타내었다. 결론 : 간경화 환자에서 저산소혈증은 적지 않은 빈도로 관찰되는 소견으로 그 기전으로는 폐내단락이 중요한 역할을 하는 것으로 생각되지만 후괴사성 간경화가 대종을 이루는 국내의 간경화 환자에서는 임상적으로 호흡곤란 및 청색증을 유발할 정도의 심각한 저산소혈증은 매우 드물다고 생각된다.

• Asia pacific journal of information systems
• /
• 제22권4호
• /
• pp.101-123
• /
• 2012

Currently, Social Media, it has widely a renown keyword and its related social trends and businesses have been fastly applied into various contexts. Social media has become an important research area for scholars interested in online technologies and cyber space and their social impacts. Social media is not only including web-based services but also mobile-based application services that allow people to share various style information and knowledge through online connection. Social media users have tendency to common identity- and bond-attachment through interactions such as 'thumbs up', 'reply note', 'forwarding', which may have driven from various factors and may result in delivering information, sharing knowledge, and specific experiences et al. Even further, almost of all social media sites provide and connect unknown strangers depending on shared interests, political views, or enjoyable activities, and other stuffs incorporating the creation of contents, which provides benefits to users. As fast developing digital devices including smartphone, tablet PC, internet based blogging, and photo and video clips, scholars desperately have began to study regarding diverse issues connecting human beings' motivations and the behavioral results which may be articulated by the format of antecedents as well as consequences related to contents that people create via social media. Social media such as Facebook, Twitter, or Cyworld users are more and more getting close each other and build up their relationships by a different style. In this sense, people use social media as tools for maintain pre-existing network, creating new people socially, and at the same time, explicitly find some business opportunities using personal and unlimited public networks. In terms of theory in explaining this phenomenon, social capital is a concept that describes the benefits one receives from one's relationship with others. Thereby, social media use is closely related to the form and connected of people, which is a bridge that can be able to achieve informational benefits of a heterogeneous network of people and common identity- and bonding-attachment which emphasizes emotional benefits from community members or friend group. Social capital would be resources accumulated through the relationships among people, which can be considered as an investment in social relations with expected returns and may achieve benefits from the greater access to and use of resources embedded in social networks. Social media using for their social capital has vastly been adopted in a cyber world, however, there has been little explaining the phenomenon theoretically how people may take advantages or opportunities through interaction among people, why people may interactively give willingness to help or their answers. The individual consciously express themselves in an online space, so called, common identity- or bonding-attachments. Common-identity attachment is the focus of the weak ties, which are loose connections between individuals who may provide useful information or new perspectives for one another but typically not emotional support, whereas common-bonding attachment is explained that between individuals in tightly-knit, emotionally close relationship such as family and close friends. The common identify- and bonding-attachment are mainly studying on-offline setting, which individual convey an impression to others that are expressed to own interest to others. Thus, individuals expect to meet other people and are trying to behave self-presentation engaging in opposite partners accordingly. As developing social media, individuals are motivated to disclose self-disclosures of open and honest using diverse cues such as verbal and nonverbal and pictorial and video files to their friends as well as passing strangers. Social media context, common identity- and bond-attachment for self-presentation seems different compared with face-to-face context. In the realm of social media, social users look for self-impression by posting text messages, pictures, video files. Under the digital environments, people interact to work, shop, learn, entertain, and be played. Social media provides increasingly the kinds of intention and behavior in online. Typically, identity and bond social capital through self-presentation is the intentional and tangible component of identity. At social media, people try to engage in others via a desired impression, which can maintain through performing coherent and complementary communications including displaying signs, symbols, brands made of digital stuffs(information, interest, pictures, etc,). In marketing area, consumers traditionally show common-identity as they select clothes, hairstyles, automobiles, logos, and so on, to impress others in any given context in a shopping mall or opera. To examine these social capital and attachment, we combined a social capital theory with an attachment theory into our research model. Our research model focuses on the common identity- and bond-attachment how they are formulated through social capitals: cognitive capital, structural capital, relational capital, and individual characteristics. Thus, we examined that individual online kindness, self-rated expertise, and social relation influence to build common identity- and bond-attachment, and the attachment effects make an impact on both the willingness to help, however, common bond seems not to show directly impact on information sharing. As a result, we discover that the social capital and attachment theories are mainly applicable to the context of social media and usage in the individual networks. We collected sample data of 256 who are using social media such as Facebook, Twitter, and Cyworld and analyzed the suggested hypotheses through the Structural Equation Model by AMOS. This study analyzes the direct and indirect relationship between the social network service usage and outcomes. Antecedents of kindness, confidence of knowledge, social relations are significantly affected to the mediators common identity-and bond attachments, however, interestingly, network externality does not impact, which we assumed that a size of network was a negative because group members would not significantly contribute if the members do not intend to actively interact with each other. The mediating variables had a positive effect on toward willingness to help. Further, common identity attachment has stronger significant on shared information.

• 한국유통학회지:유통연구
• /
• 제16권2호
• /
• pp.57-94
• /
• 2011

자사 온라인점포로 고객 방문을 이끌어내기 위해 마케터는 고객의 욕구를 반영한 웹사이트를 구축한다. 기존 연구의 상당수는 온라인점포에서 고객의 반응에 영향을 주는 기술적, 기능적, 내적 특성 변수들에 관한 것이어서 소비자 심리, 외적 단서 변수에 관한 연구는 미흡하였다. 이에 본 연구에서는 관계의 선행 변수로 제시되는 개성을 온라인에서의 점포 개성으로 하여 점포 충성도에 미치는 영향을 소비자 심리 변수인 동일시, 신뢰, 인게이지먼트를 매개변수로 고려하여 이들 변수의 구조적 인과관계를 규명해 보았다. 연구결과, 온라인에서도 점포 개성이 존재하며 온라인점포 개성의 일부 차원이 동일시에 긍정적인 영향을 미치고 동일시는 점포 충성도에 직접적인 영향을 미치기도 하지만 신뢰와 인게이지먼트를 매개하여 간접적인 영향도 주는 것으로 나타났다. 연구의 후반부에 본 연구의 시사점, 한계, 향후 연구 방향을 제시하였다.

• 시큐리티연구
• /
• 제39호
• /
• pp.185-215
• /
• 2014

한국은 지금까지 북한의 테러범죄로 인해 많은 피해를 입었다. 현재 북한정권에 의한 테러 범죄행위 발생 가능성은 그 어느 때보다 높은 시점이고, 김일성 정권의 북한 테러범죄 행위는 통치자금 확보라는 목적 하에 독재로 자행되어 왔다. 이후 김정일 김정은 정권 동안 테러범죄 행위를 살펴보면, 비(非)권력 집단의 목표인 권력쟁취 경제이권 확보 등을 성취하고자 하는 갈등이 원인으로 작용하여 범죄행위로 표출되고 있음이 드러난다. 본 연구는 테러 대책의 궁극적인 목적이 장차 발생할 가능성 높은 위협에 대하여 사전예측 대비해야 한다는 측면에 초점을 맞추었으며, 이를 위해 집단 간 권력 갈등이 범죄의 한 요인이 된다고 설명하는 George B. Vold(1958)의 이론을 적용했다. 이에 다양한 북한 테러범죄 원인 중 각 시대별 고위층 권력 갈등으로 인한 테러범죄 행위를 분석하고, 이러한 시대적 흐름에 맞는 향후 대응방안을 제시하였다. 북한의 테러범죄 행위는 김정일 정권 이후, 고위층 간 권력 판도가 시대별로 급격히 변화하면서 세력 쟁취와 이권 강탈을 위한 권력 갈등으로 인해 더욱 심화되었다. 북한 고위층의 권력 갈등이 북한 테러범죄에 많은 영향을 미치고 있음에도 불구하고, 이에 관련된 정보 첩보 수집이 단편적인데다가 미국에 의존하는 등 실제적인 대응이 미약한 실정이다. 게다가 북한 테러범죄에 대한 심각성 및 시급함의 공감도 역시 높지 않아서 체계적인 국제공조가 이루어지지 않고 있으며, 공조 방안에 대한 논의조차 원활하게 진행되지 않고 있다. 더욱이 최근 DDoS공격 청와대 홈페이지 변조 GPS 교란전파 발사 무인정찰기 침투 등 수 많은 테러범죄 행위가 있었음에도 불구하고, 한국은 이 같은 비(非)대칭 테러범죄 행위가 미칠 파문에 비해 그 심각성을 깊이 인식하지 못하고 있다. 이제 북한 테러범죄의 원인을 밝히고 대응하기 위해 휴민트(HUMINT) 테킨트(TECHINT) 등을 통한 고위층 정보 수집을 확대하고, 이를 종합 분석하는 전담부서를 설치하는 한편, 탈북자 등 정보원의 보호 및 감독을 통한 포괄적인 수집체제를 확립해야 한다. 그리고 북한 테러와 관련된 국제협력에 적극 동참하여, 국제협약을 이끌어낼 수 있도록 국제적인 공조를 구축해야 한다. 또한 핵 미사일 테러와 함께 한층 정교해지고 첨단화 되어가는 사이버 전자 테러 전문기술에 대비하기 위해 법령 제 개정 및 관련 기구 예산 등 제도적 정비와 기술을 보완할 수 있는 전문 인력 양성 및 기술개발 등 실질적인 대응방안을 마련해야 할 것이다.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3642-3654
• /
• 1975

The purpose of this thesis is to derive a unit hydrograph which may be applied to the ungaged watershed area from the relations between directly measurable unitgraph properties such as peak discharge(qp), time to peak discharge (Tp), and lag time (Lg) and watershed characteristics such as river length(L) from the given station to the upstream limits of the watershed area in km, river length from station to centroid of gravity of the watershed area in km (Lca), and main stream slope in meter per km (S). Other procedure based on routing a time-area diagram through catchment storage named Instantaneous Unit Hydrograph(IUH). Dimensionless unitgraph also analysed in brief. The basic data (1969 to 1973) used in these studies are 9 recording level gages and rating curves, 41 rain gages and pluviographs, and 40 observed unitgraphs through the 9 sub watersheds in Nak Oong River basin. The results summarized in these studies are as follows; 1. Time in hour from start of rise to peak rate (Tp) generally occured at the position of 0.3Tb (time base of hydrograph) with some indication of higher values for larger watershed. The base flow is comparelatively higher than the other small watershed area. 2. Te losses from rainfall were divided into initial loss and continuing loss. Initial loss may be defined as that portion of storm rainfall which is intercepted by vegetation, held in deppression storage or infiltrated at a high rate early in the storm and continuing loss is defined as the loss which continues at a constant rate throughout the duration of the storm after the initial loss has been satisfied. Tis continuing loss approximates the nearly constant rate of infiltration (${\Phi}$-index method). The loss rate from this analysis was estimated 50 Per cent to the rainfall excess approximately during the surface runoff occured. 3. Stream slope seems approximate, as is usual, to consider the mainstreamonly, not giving any specific consideration to tributary. It is desirable to develop a single measure of slope that is representative of the who1e stream. The mean slope of channel increment in 1 meter per 200 meters and 1 meter per 1400 meters were defined at Gazang and Jindong respectively. It is considered that the slopes are low slightly in the light of other river studies. Flood concentration rate might slightly be low in the Nak Dong river basin. 4. It found that the watershed lag (Lg, hrs) could be expressed by Lg=0.253 (L.Lca)0.4171 The product L.Lca is a measure of the size and shape of the watershed. For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the watershed characteristics, L and Lca. 5. Expression for basin might be expected to take form containing theslope as {{{{ { L}_{g }=0.545 {( { L. { L}_{ca } } over { SQRT {s} } ) }^{0.346 } }}}} For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the basin characteristics too. It should be needed to take care of analysis which relating to the mean slopes 6. Peak discharge per unit area of unitgraph for standard duration tr, ㎥/sec/$\textrm{km}^2$, was given by qp=10-0.52-0.0184Lg with a indication of lower values for watershed contrary to the higher lag time. For the logarithms, the correlation coefficient qp was 0.998 which defined high sign ificance. The peak discharge of the unitgraph for an area could therefore be expected to take the from Qp=qp. A(㎥/sec). 7. Using the unitgraph parameter Lg, the base length of the unitgraph, in days, was adopted as {{{{ {T}_{b } =0.73+2.073( { { L}_{g } } over {24 } )}}}} with high significant correlation coefficient, 0.92. The constant of the above equation are fixed by the procedure used to separate base flow from direct runoff. 8. The width W75 of the unitgraph at discharge equal to 75 per cent of the peak discharge, in hours and the width W50 at discharge equal to 50 Per cent of the peak discharge in hours, can be estimated from {{{{ { W}_{75 }= { 1.61} over { { q}_{b } ^{1.05 } } }}}} and {{{{ { W}_{50 }= { 2.5} over { { q}_{b } ^{1.05 } } }}}} respectively. This provides supplementary guide for sketching the unitgraph. 9. Above equations define the three factors necessary to construct the unitgraph for duration tr. For the duration tR, the lag is LgR=Lg+0.2(tR-tr) and this modified lag, LgRis used in qp and Tb It the tr happens to be equal to or close to tR, further assume qpR=qp. 10. Triangular hydrograph is a dimensionless unitgraph prepared from the 40 unitgraphs. The equation is shown as {{{{ { q}_{p } = { K.A.Q} over { { T}_{p } } }}}} or {{{{ { q}_{p } = { 0.21A.Q} over { { T}_{p } } }}}} The constant 0.21 is defined to Nak Dong River basin. 11. The base length of the time-area diagram for the IUH routing is {{{{C=0.9 {( { L. { L}_{ca } } over { SQRT { s} } ) }^{1/3 } }}}}. Correlation coefficient for C was 0.983 which defined a high significance. The base length of the T-AD was set to equal the time from the midpoint of rain fall excess to the point of contraflexure. The constant K, derived in this studies is K=8.32+0.0213 {{{{ { L} over { SQRT { s} } }}}} with correlation coefficient, 0.964. 12. In the light of the results analysed in these studies, average errors in the peak discharge of the Synthetic unitgraph, Triangular unitgraph, and IUH were estimated as 2.2, 7.7 and 6.4 per cent respectively to the peak of observed average unitgraph. Each ordinate of the Synthetic unitgraph was approached closely to the observed one.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.