• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.743-753
• /
• 2005

The model of azimuth driving servo system with a flexible antenna in a prototype gimbal has been derived in this work. The validity of the model is verified by comparing the result of the model with that of experiment. It is found that one should consider an antenna as a flexible body in case of modeling the dynamics of the gimbal with an antenna. It is also known that the effect of reducing backlash magnitude for extending the bandwidth in the system with a flexible antenna is smaller than the system with a stiff antenna. It is thought that the model-based design optimization of the gimbal with an antenna will be possible by virtue of the derived model, when a weight reduction and a bandwidth extension are required.

• 컴퓨터교육학회논문지
• /
• 제6권3호
• /
• pp.47-56
• /
• 2003

We describe a new method for removing non-linear phased array antenna aberration called "squint" problem. To develop a compensation scheme. theoretical antenna and artificial neural networks were used. The purpose of using the artificial neural networks is to develop an antenna system model that represents the steering function of an actual array. The artificial neural networks are also used to implement an inverse model which when concatenated with the antenna or antenna model will correct the "squint" problem. Combining the actual steering function and the inverse model contained in the artificial neural network, alters the steering command to the antenna so that the antenna will point to the desired position instead of squinting. The use of an artificial neural network provides a method of producing a non-linear system that can correct antenna performance. This paper demonstrates the feasibility of generating an inverse steering algorithm with artificial neural networks.

• ETRI Journal
• /
• 제30권5호
• /
• pp.723-728
• /
• 2008

In this paper, a simple transmission line model for an edge-coupled patch antenna is presented. The coupled section is modeled with a lump network which represents the mutual admittance between patches and from patch to ground. Theoretical analysis of two edge-coupled patch antenna models are compared by simulation and experiment in antennas designed to operate at the 2 GHz band. The proposed model predicts the return loss of the antenna accurately.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1711-1716
• /
• 2004

This paper presents identification and control of a 10-m antenna via accelerometers and angle encoder data. Artificial Neural Networks can be used effectively for the identification and control of nonlinear dynamical system such as a large flexible antenna. Some identification results are shown and compared with the results of conventional prediction error method. And we use a neural network inverse model for control the large flexible antenna. In the neural network inverse model, a neural network is trained, using supervised learning, to develop an inverse model of the antenna. The network input is the process output, and the network output is the corresponding process input. The control results show the validation of the ANN approach for identification and control of the 10-m flexible antenna.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.339-342
• /
• 1998

The stacked microstrip patch antenna is modeled by a simple cavity model. Using this model, the input impedance of the stacked microstrip patch antenna fed by a coaxial probe is expressed as a function of antenna paprameters and frequency. We calculate the input impedance of the stacked microstrip patch antenna for the variation of frequency.

• Journal of information and communication convergence engineering
• /
• 제16권4호
• /
• pp.203-212
• /
• 2018

In this article, a novel design of patch antenna with wide band characteristics is presented. The proposed antenna is having electrical dimensions of $0.14{\lambda}{\times}0.11{\lambda}$ (at lower initial frequency) and footprints of $150mm^2$. Structural parameters optimization shows 3.1-23.5 GHz frequency range for a (reflection coefficient) $S_{11}{\leq}-10dB$ and simulated gain 6.8 dB is obtained. An equivalent circuit model is proposed to get an insight view of antenna. Advanced Systems Design (ADS) simulation results are obtain which confirm the validity of proposed model. Degenerated foster canonical form has been used to explain the reactance and capacitive behavior idea of simulated proposed antenna's input impedance later on an equivalent circuit model and smith chart is also suggested. HFSS and CST have been used to analyze antenna behavior. The proposed antenna can be further used for microwave image detection applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1536-1541
• /
• 2003

The model of azimuth driving servo system with a flexible antenna in a microwave seeker has been derived in this paper. The validity of the model is verified by comparing the result of the model with that of experiment. It is found that one should consider an antenna as a flexible body in case of modeling the dynamics of the microwave seeker. It is also known that the effect of reducing backlash magnitude for extending the bandwidth in the system with a flexible antenna is smaller than that in the system with a stiff antenna. It is thought that the model-based design optimization of the microwave seeker will become possible by virtue of the derived model, when a weight reduction and a bandwidth extension are required.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.

• 한국전자파학회논문지
• /
• 제26권6호
• /
• pp.525-532
• /
• 2015

본 논문에서는 대형 구조체에 장착된 안테나의 효율적인 성능예측을 위하여, 열린 도파관을 이용한 배열안테나 해석등가 모델링 기법을 제안하였다. 등가 모델을 구현하기 위하여 우선 배열 안테나의 개별 소자를 열린 도파관 형상으로 설계하였으며, 도파관의 깊이, 도파관의 개구면 넓이, 그라운드의 크기를 조절하여 원하는 개별 소자의 방사패턴의 도출이 가능하도록 하였다. 개발된 개별 소자를 두 가지 타입의 배열안테나의 등가 모델링에 적용하였다. 등가모델을 이용하여 도출된 안테나의 성능을 원본 안테나의 해석 성능과 비교하였으며, 최대이득은 0.2 dB, 반전력 빔폭은 $1^{\circ}$ 이내의 오차를 보여, 등가모델을 이용한 원본 안테나의 성능 모사가 가능함을 확인하였다. 또한, 제안된 등가모델을 간단한 항공기 형상에 장착하여 전자파 해석을 수행하였으며, 원본 안테나를 탑재한 해석 결과와 비교하였고, 그 결과 시뮬레이션 필요 해석 자원 및 해석 시간이 60 % 이상 감소하는 것을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제9권4호
• /
• pp.93-97
• /
• 2004

본 논문에서는 수분센서용으로 적합한 구조의 안테나로 소형 도체면 구조의 개루우프 안테나를 모델로 제시하고, 그 동작특성을 모멘트법을 이용하여 수치해석하였다. 수치해석 결과 동작주파수 $300{\sim}500[MHz]$ 대역에서 안테나의 파라미터 값들의 변화에 따라 입력임피던스는 $50[{\Omega}]$으로 정합시킬 수 있었으며, 또한 개루우프 반경, 높이, 폭은 안테나의 공진주파수를 변화시키는 파라미터로 작용하였으며, 부하로 사용되는 인덕턴스 값은 안테나의 입력임피던스를 조절할 수 있는 파라미터로 작용하고 있음을 알 수 있었다.