• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.549-554
• /
• 2017

In this paper, we studied the design and fabrication of $2{\times}2$ microstrip array antenna at around 5 GHz band.. To improve of frequency properties of antenna, feed microstrip patch antenna was simulated by HFSS(High Frequency Structure Simulator). A $2{\times}2$ array antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated $2{\times}2$ array antenna showed a center frequency, the minimum return loss and bandwidth were 5.3 GHz, -24dB, and 390MHz, respectively.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.162-166
• /
• 2020

The present paper presents an array antenna of a microstrip patch for 5G applications. Four rectangular microstrip patch elements are arranged in parallel and series to form an array antenna. Two insets are made on both sides of each patch element to achieve a wide frequency bandwidth of 23.97-31.60 GHz. To attain a high gain and wider bandwidth, the microstrip patch antenna is fed using series and corporate feeding networks. Further, three director elements on top of the top-most patch elements, and one reflector element at the open end of each patch element, are added. The addition of the Yagi elements improved the overall gain and acquired a higher radiation efficiency throughout the operating frequency bandwidth, with the array antenna achieving a maximum peak gain of 8.7 dB. The proposed antenna is built on a low-loss and low-cost substrate of FR4-eproxy. The proposed antenna design with a simple structure is suitable for Internet of Things and 5G applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1050-1055
• /
• 2010

In this paper, the K band $3{\times}6$ array antenna having unequal input is presented. To control the input impedance of the patch antenna, the length of inset feed is adjusted. Also, the same current in each element is excited by Kirchhoff's law. The proposed unequal impedance array antenna is a nonuniform amplitude array. The bandwidth of the proposed unequal impedance array antenna is wider by 1.5 times than that of the equal array antenna. This broad bandwidth is thought to be due to multiple resonances of patches. The unequal impedance array antennas have fractional bandwidths of 5.07 % and gains of 18.32 dBi.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.889-893
• /
• 2014

This paper presents a high-performance dual-circularly polarized feed employing a dielectric-filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter-wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end-launch-type coaxial-to-waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.144-150
• /
• 2012

In this paper, circularly polarization patch array antenna of RSE(Road-side Equipment) base station for DSRC(Dedicated Short Range Communication) of ITS(Intelligent Transport System) is proposed. The antenna of RSE base station for DSRC is designed to operate circularly polarization to receive reflected signal from multiplex path effectively. The proposed antenna consisted of microstrip patch and feed line, the slit is inserted in the proximity of the slot of feed structure to generate circularly polarization. The $2{\times}2$ array structure is designed to satisfying gain that DSRC RSE base station antenna required. Measured impedance bandwidth and axial-ratio bandwidth are satisfied by all DSRC band of 5.795~5.855 GHz. Vertical and horizontal HPBW of the proposed antenna are both about 43 degrees, it showed gain characteristic of about 11.21 dBi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1529-1536
• /
• 2010

In this paper, we propose a Axially displaced ellipse gregorian antenna with conical feed horn operating in Ku-band. For fast searching satellite position, it is designed the sub-reflector rotates about $1.5^{\circ}$ tilted by the central axis. the curvature and feed center of the main-reflector and sub-reflector are optimized to achieve maximum antenna efficiency. The designed reflector antenna shows the gain of 33dB and the cross polarization level of less than -21dB and the side-lobe level of less than －14 dB at 12.2 GHz. and C/N ratio of 19dB is proved by reception experiment of Koreasat with fabricated antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1279-1290
• /
• 2007

In this paper, a cylindrical hybrid antenna which is spatially fed by an off-set linear feed array is described to form complex beam patterns. The linear feed array consists of twelve micro-strip patch elements and forms a flat-topped beam pattern with a beam-width of $90^{\circ}$ in the horizontal plane. The vertical curve on the cylindrical reflector with the linear feed array is shaped in order to form a cosecant beam pattern within the range of $-5^{\circ}$ to $-25^{\circ}$ in the vertical plane. To form complex beam patterns, the hybrid antenna with cylindrical reflector aperture of $140{\times}50\;cm$ was designed and fabricated to be operated within the IMT 2000 service band, and also electrical performances of the antenna were measured and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.630-639
• /
• 1998

In this paper, a T-shaped microstrip feed line is proposed for a better impedance matching to the microstrip slot antenna in a various range of slot widths. It was found that the bandwidth of this antenna is proportional to the slot width. It was also found that the radiation resistance of this feed line structure is quite constant and low regardless to the slot width. A slot antenna with T-shaped microstrip feed line is analyzed by using the FDTD method. At first, the propagation process of the reflected wave and the electric field distribution in the time domain is calculated respectively. The antenna parameters also are optimized to get maximum band width, return loss, input impedance, and radiation pattern in the frquency domain by Fourier transforming the time domain results. From the computed results, the optimum slot antenna is designed and fabricated. When the slot width is 16 mm, approximately 35% of bandwidths are obtained without a matching circuit. These computed results using FDTD method were in relatively good accordance with the measured values.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.1-10
• /
• 1999

In this paper, the design for the shaped offset cassegrain antenna system combined with corrugated feed horn is presented. First, spherical-mode wave theory is applied to the corrugated conical horn and its radiation patterns are investigated. Using the radiation patterns, design data of the corrugated conical horn are obtained by efficiency investigation of horn antenna. When the investigation is completed, the flare angle and length of the corrugated conical horn is determined. Next, the main and sub-reflector is designed using Snellis law and the conservation principle of energy. Then the uniform direction and energy density of the traveling wave at the aperture of the main-reflector is obtained. The maximum size of the main-reflector is determined by investigation of the illumination and spillover efficiency. Finally, the curvature of the main-reflector is modified to satisfy the condition of the uniform phase. From the calculated efficiencies, the designed site of the main-reflector and sub-reflector, system gain of the shaped offset cassegrain antenna has been obtained 40.5dB in Ka-band frequency. It has better characteristics than the result of SABOR with 39dB gain.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.391-395
• /
• 2008

Wideband terminal and base station is required to serve not only existing 1st and 2nd generation mobile communication systems but also 3rd generation systems. In this paper, we present a feasibility study on coaxial feed compact wideband antenna for UHF RFID reader application. The original antenna was designed for partial discharge detection sensor in high voltage diagnostic system. However, we modified the original prototype to achieve shifted down resonant frequency for wideband wireless communication applications. The experimental result shows good return loss characteristics and radiation patterns except for the total gain at each resonant frequency. The maximum measured gain was 2.45 dBi$\sim$3.18 dBi at 910MHz.