• Journal of the Korean Ceramic Society
• /
• v.24 no.6
• /
• pp.572-578
• /
• 1987

The vacuum evaporated Au films on soda-lime glasses were measured by the electrical conductivity with the variation of the annealing time, relative humidity, and temperature. Au films structures were observed by scanning Electron Microscope and X-ray Diffractometer. As the annealing time and temperature increased, the electrical conductivity was increased due to the migration or annihilation of defects, but the electrical conductivity was decreased as with the relative humidity increased. Au films by XRD and SEM examination showed the negligible effect of chemical reactions.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.699-701
• /
• 1997

The simulated annealing(SA) algorithm is a stochastic strategy for search of the ground state and a powerful tool for optimization, based on the annealing process used for the crystallization in physical systems. It's main disadvantage is the long convergence time. Therefore, this paper proposes a stochastic algorithm combined with conventional deterministic optimization method to reduce the computation time, which is called SDS(Stochastic-Deterministic-Stochastic) method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.82-85
• /
• 1988

In the present study, we have investigated a novel photothermal imaging technique in $80^{\circ}$ deposited Ge Se film which do not utilize silver and deposited a-$Ge_{25}Se_{75}$ films was measured with the exposure time and annealing time. The results showed that the maximum changing rate of thickness was 3% in exposured film and 14% in postexposure annealing film.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.797-802
• /
• 2000

Flow shop scheduling problem involves processing several jobs on common facilities where a setup time Is incurred whenever there is a switch of jobs. Practical aspect of scheduling focuses on finding a near-optimum solution within a feasible time rather than striving for a global optimum. In this paper, a hybrid meta-heuristic method called tabu-genetic algorithm(TGA) is suggested, which combines the genetic algorithm(GA) with tabu list. The experiment shows that the proposed TGA can reach the optimum solution with higher probability than GA or SA(Simulated Annealing) in less time than TS(Tabu Search). It also shows that consideration of setup time becomes more important as the ratio of setup time to processing time increases.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.96-96
• /
• 2006

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.4
• /
• pp.223-229
• /
• 2004

The effects of the cooling and annealing conditions on the microstructures and corrosion properties were investigated for the Cu-contained Zr-Nb alloy (Zr-1.1Nb-0.07Cu). After annealing at $1050^{\circ}C$ for 15 min, the specimens were cooled by three methods of water quenching, air cooling, and furnace cooling. Widmanstatten structures were developed in both air- and furnace-cooled specimens, and the Widmanstatten plate width of the furnace-cooled specimens was wider than that of the air-cooled ones. The weight gain in the furnace-cooling case was higher than that in the air-cooling case. This could be the reason why the diffusion time was more enough during the furnace cooling than the air cooling. The oxide of the furnace-cooled specimen was nonunformly formed just beneath the Widmanstatten plate boundaries, where ${\beta}_{Zr}$ phases were exised concentrately. Compared with the $640^{\circ}C$ annealing after the water quenching, the $570^{\circ}C$ annealing could make the ${\beta}_{Nb}$ phases and a concomitant reduction of the Nb in the matrix, and then it could improve the corrosion resistance with the increase of the annealing time. It would be concluded that the corrosion resistance of the Zr-1.1Nb-0.07Cu was good when the Nb concentration in the matrix was reached at an equilibrium level and then the ${\beta}_{Nb}$ phase was formed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.149-155
• /
• 1996

In this paper, we designed binary phase grating with SA (simulated annealing) algorithm for image generation, and used LCTV(liquid crystal television) as phase modulator. We generated optical image using LCTV which controlled by personal computer in real time. Many parameters in SA algorithm are determined by average deviation of the cost function, not experimental method. It was confirmed that the LCTV could be used as a phase modulator through mach-zehnder interferometering experiment. The various optical images are generated in real itme by fourier transforming of the phase gratings on LCTV which is controlled by personal computer and they can be used for optical interconnection in a neural network and addressing information in a volume hologram etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.535-538
• /
• 2002

Cube-textured Ni substrates for YBCO coated conductors were fabricated by cold-rolling and annealing of Ni powder compacts. To establish the optimum sintering temperature, tensile test was performed for the Ni rod sintered at various temperatures. The Ni rods prepared at above 100$0^{\circ}C$ showed good mechanical properties due to the complete densification of the Ni rods. The Ni rods were rolled to final thickness of 100 ${\mu}{\textrm}{m}$ and then annealed at 100$0^{\circ}C$ for various annealing time for texture development. The texture analysis made by 2 $\theta$ scan and pole-figure showed that the cube texture was developed in a short time of a few munitues. The FWHM of in-plane and out of plane texture of the prepared Ni tapes was 8-10$^{\circ}$. The AEM surface roughness of the Ni tapes was as smooth as 3 nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.102-102
• /
• 1999

Visible photoluminescence(PL) in si-implanted SiO2 films on crystaline silicon were observed. Thermal oxide films of 1 ${\mu}{\textrm}{m}$ thickness on P-type crystal silicon were made and si+ ions were implanted with 200keV acceleration voltage on ti. Argon laser (wavelength 488nm) and PM tube were used for PL measurements. As annealing time increased at low temperature, the visible PL intensity are increased and the peak positions are changed. On the other hand, with increasing annealing time at high temperature, the visible PL intensity are disappeared. From the PL peaks and intensity changes, XRD results, and TEM observations, we will discuss the origin of PL in Si+-implanted SiO2 films with oxygen righ defects and silicon rich defects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1753-1762
• /
• 2000

An inverse method is presented to obtain material's flow properties by using small punch test. This procedure employs, as the objective function of inverse analysis, the balance of measured load-di splacement response and calculated one during deformation. In order to guarantee convergence to global minimum, simulated annealing method was adopted to optimize the current objective function. In addition, artificial neural network was used to predict the load-displacement response under given material parameters which is the most time consuming and limits applications of global optimization methods to these kinds of problems. By implementing the simulated annealing for optimization along with calculating load-displacement curve by neural network, material parameters were identified irrespective of initial values within very short time for simulated test data. We also tested the present method for error-containing experimental data and showed that the flow properties of material were well predicted.