• 한국진공학회지
• /
• 제2권4호
• /
• pp.468-473
• /
• 1993

Damages on Si substrate induced by Ar ion implantation and it annealing behavior during rapid thermal annealing were investigated by the cross-sectional TEM (transmissin electron microscopy), RB(Rutherfordbackscattering) spectra an dthermal wave (TW) modulation reflectance methods. Continuous amorphous layer extending to the surface were generated by Ar ion implantation for higher doses than 1 $\times$1015cm-2. The recrystallization of the amorphous layer prodeeded as the annealing temperature increased . However the amorphous /crystal interfacial undulations caused the micro twins and damage clusters. Damage clusters generated by lower doses than 1 $\times$1015 cm-2 disappeared slowly as the annealing temperature increased, but even at 110$0^{\circ}C$ a few damage clusters still remained.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.91-99
• /
• 1994

Damage induced by Si ion implantation and its annealing behavior during rapid thermal annealing were investigated by cross-sectional TEM (transmission electron microscopy) and RB ( Rutherford backscattering) spectrum. 150keV and 50keV Si ions were implanted in Si (100) at room temperature with doses of 2${\times}10^{15}cm^{-2}$. And 100keV Si ions were implanted in Si with doses from 1${\times}10^{14}cm^{-2}$. A variety of damage structures were generated by Si ion implantation such as continuous amorphous layer extending to the surface buried amorphous layer and damage clusters. Damage clusters are annealed out at the lower annealing temperature of 550 $^{\circ}C$. However, event at the temperature of 110$0^{\circ}C$ end of range loops remain in the original lower amorphous/crystal interface in the case of continuous and buried amorphous layer formation. Extended defects in the shape of zipper dislocations are also observed at the middle of the recrystallized region in the buried amorphous layer.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.299-306
• /
• 1998

비정질 규소가 결정질로 되기 위해서는 활성화가 필요하다. 이 활성화는 레이저 및 로내에서의 열처리로 열에너지를 가하면 달성될 수 있다. 이때 이 열에너지 외에 기계적 에너지 등을 가하면 활성화에 도움이 될 수 있을 것이다. 본 연구에서는 습식연마와 자기이온주입 등의 방법으로 기계적 손상을 주어서 이것이 LPCVD로 증착된 비정질 규소 박막의 결정화에 미치는 영향을 조사하였다. 결정성 확인을 위해서는 XRD와 라만분석법을 사용하였다. 본 연구의 결과, 기계적 손상이 비정질 규소 박막의 결정화를 증진시키는 것을 확인하였다.

• Journal of Magnetics
• /
• 제11권1호
• /
• pp.55-59
• /
• 2006

The effect of annealing temperature on the permeability and giant magneto-impedance (GMI) behaviors of $Fe_{68.5}Mn_{5}Si_{13.5}B_9Nb_3Cu_1$ amorphous alloy has been systematically investigated. The nanocrystalline $Fe_{68.5}Mn_{5}Si_{13.5}B_9Nb_3Cu_1$ alloys consisting of ultra-fine $(Fe,Mn)_3Si$ grains embedded in an amorphous matrix were obtained by annealing their precursor alloy at the temperature range from $500^{\circ}C\;to\;600^{\circ}C$ for 1 hour in vacuum. The permeability and GMI profiles were measured as a function of external magnetic field. It was found that the increase of both the permeability and the GMI effect with increasing annealing temperature up to $535^{\circ}C$ was observed and ascribed to the ultrasoft magnetic properties in the sample, whereas an opposite tendency was found when annealed at $600^{\circ}C$ which is due to the microstructural changes caused by high-temperature annealing. The study of temperature dependence on the permeability and GMI effect showed some insights into the nature of the magnetic exchange coupling between nanocrystallized grains through the amorphous boundaries in nanocrystalline magnetic materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.224-225
• /
• 2007

The Low dielectric properties of epoxy/Annealing $SiO_2$ composites using Annealing new material of nanosized amorphous particles were investigated as function frequency, temperature and filler contents composition. The dielectric constant decrease with increasing frequency and also increase with increasing ambient temperature. The dielectric constant decrease with increase annealing filler contents for epoxy base. The result of x-ray diffraction could obtained single crystal of annealing $SiO_2$ from 500nm amorphous $SiO_2$ powder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1181-1183
• /
• 1995

In this study, we observed the surface morphology of amorphous silicon annealed at $700{\sim}1000^{\circ}C$ for recrystallization. In case of $700{\sim}800^{\circ}C$ annealing, deposited amorphous silicon have the saturated XRD intensity and decreased surface roughness after annealing for 3 hours. It is thought that surface roughness of amorphous silicon increases because of contributions caused by atomic rearrangement of surface, for instance, surface stress etc., in the course of recrystallinzation and decrease because of the relaxation of stress by annealing in reaching completion of recrystallization. In case of $1000^{\circ}C$ annealing, the effect of grain size on deposited silicon is more effective than that of surface roughness. These results show that small grain silicon has the stronger dependence on surface roughness than large grain one.

• 한국재료학회지
• /
• 제26권6호
• /
• pp.342-346
• /
• 2016

To observe the bonding structure and electrical characteristics of a GZO oxide semiconductor, GZO was deposited on ITO glasses and annealed at various temperatures. GZO was found to change from crystal to amorphous with increasing of the annealing temperatures; GZO annealed at $200^{\circ}C$ came to have an amorphous structure that depended on the decrement of the oxygen vacancies; increase the mobility due to the induction of diffusion currents occurred because of an increment of the depletion layer. The increasing of the annealing temperature caused a reduction of the carrier concentration and an increase of the bonding energy and the depletion layer; therefore, the large potential barrier increased the diffusion current dna the Hall mobility. However, annealing temperatures over $200^{\circ}C$ promoted crystallinity by the defects without oxygen vacancies, and then degraded the depletion layer, which became an Ohmic contact without a potential barrier. So the current increased because of the absence of a potential barrier.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.7-12
• /
• 2001

A viscous Ni solution was coated over amorphous Si thin film for evenly spread of Ni metal source. The Ni s. prepared by dissolving $NiCl_2$ into IN HCI and mixing with propylene glycol. $NiCl_2$ and Ni were deposited on the amorphous film after oven dry and they enabled to obtain a uniform crystallization. The crystallization using the viscous Ni solution was a Ni-silicide mediated process, the same process used with Ni metal layer. The crystallization temperature was lowered to $480^{\circ}C$ by the synergy effect of silicide-mediated crystallization and microwave-induced crystallization. Lateral crystallization was also enhanced such that the velocity of lateral crystallization by microwave annealing became faster than by furnace annealing.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.343-347
• /
• 2004

We investigated the growth feasibility of polycrystalline Si film on mica substrate for the transfer of the layer to a plastic substrate. The annealing temperature was limited up to $600^{\circ}C$ because of crack development in the mica substrate. Amorphous Si film was deposited on mica substrate by PECVD and was crystallized by furnace annealing. During the annealing, bubbles were formed at the Si/mica interface. The bubble formation was avoided by the Ar-plasma treatment before amorphous Si deposition. A uniform and clean polycrystalline Si film was obtained by coating $NiCl_2$ on the amorphous Si film and annealing at $500^{\circ}C$ for 10 h. The conventional Si lithography was possible on the mica substrate and the devices fabricated on the substrate could be transferred to a plastic substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.473-474
• /
• 2006

We report on the rapid thermal annealing effect on the electrical, optical, and structural properties of IZO transparent conducting oxide films grown by box cathode sputtering (BCS). To investigate structural properties of rapid thermal annealed IZO films in $N_2$ atmosphere as a function of annealing temperature, syncrotron x-ray scattering experiment was carried out. It was shown that the amorphous structure of the IZO films was maintained until $400^{\circ}C$ because ZnO and $In_2O_3$ are immiscible and must undergo phase separation to allow crystallization. In addition, the IZO films grown at different Ar/$O_2$ ratio of 30/1.5 and 30/0 showed different preferred (222) and (440) orientation, respectively, with increase of rapid thermal annealing temperature. The electrical properties of the OLED with rapid thermal annealed IZO anode was degraded as rapid thermal annealing temperature of IZO increased. This indicates the amorphous IZO anode is more beneficial to make high-quality OLEDs.