• 터널과지하공간
• /
• 제22권3호
• /
• pp.205-213
• /
• 2012

본 연구에서는 $30^{\circ}$ 경사진 층리면을 가진 이방성 암반내 위치한 쌍굴터널에서 터널간 이격거리와 터널 단면의 형상이 서로 다른 다섯 가지 모형에 대해 측압계수 2의 하중조건으로 축소모형실험을 실시하였다. 실험을 통해 모형별 균열개시압력과 터널 주변지반의 변형거동을 조사하였으며, 이 조건들이 터널의 안정성에 어떠한 영향을 미치는지를 알아보았다. 터널간 이격거리가 작은 모형일수록 필라에서는 층리면을 따른 전단파괴가 발생하였으며 낮은 압력수준에서 균열이 발생하여 터널의 안정성은 상대적으로 작은 것으로 평가되었다. 사심아치형, 원형, 반원아치형 터널 모형들에 대한 실험에서 반원아치형 터널이 가장 작은 균열개시압력을 보여 터널 안정성이 가장 작게 나타났으며, 원형 터널의 안정성이 가장 크게 나타났다. 또한, 사심아치형 터널의 변형거동은 원형 터널과 반원아치형 터널의 중간적인 형태를 나타내었으며 터널 안정성도 중간정도에 해당하였다. FLAC을 사용한 수치해석 결과는 모형실험의 결과와 정성적으로 부합하였다.

• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.373-384
• /
• 1999

복합재료를 사용한 비등방성 원통형 쉘 구조형식은 단일소재의 재료역학적인 단점을 극복할 수 있다. 본 연구의 목적은 1차전단변형효과가 고려된 비등방성 원통형 쉘을 해석하는 것이다. 전단변형효과가 고려된 원통형 쉘의 거동은 기존의 고전적인 해와 길이-두께비에 따라 상당한 거동의 차이를 보이므로 이러한 전단변형효과의 고찰은 매우 중요하다고 사료된다. 또한 본 연구는 유한요소법에 근간한 상용 공학프로그램인 ANSYS와 본 연구의 프로그램결과를 비교, 검증하였으며, 비등방성 원통형 쉘의 중심각의 변화, 화이버의 보강각도 변화, 탄성계수비의 변화 등에 따른 쉘의 처짐 및 단면력을 분석하였다. 본 논문에서 사용한 유한차분법에 의한 해는 기존의 해석적인 방법으로는 해석하기 어려운 보다 다양하고 복잡한 조건을 갖는 문제에 대하여 보다 정확한 해를 얻을 수 있다. 따라서 본 논문에서 제시한 유한차분법을 이용한 다양한 비등방성 원통형 쉘의 해석결과는 복합 신소재를 사용하는 쉘 구조체의 실용화에 앞서 다양한 기준을 제시할 수 있을 것으로 판단된다.

• Elastomers and Composites
• /
• 제46권4호
• /
• pp.311-317
• /
• 2011

자기장 응답 입자를 효율적으로 배향시킬 수 있는 네오디뮴 자석이 삽입된 몰드가 제시되었다. 입자 배향 공정을 통해 이방성 자기유변 탄성체가 제조되었으며 입자의 최적 첨가량은 30 vol.% 였다. 입자 배향성이 증가할수록 자기유변 탄성체의 인장강도는 감소하고 경도는 증가하였다. FFT 분석기를 통해 측정된 최대 자기유변 특성은 30 vol.%의 자기장 응답 입자를 포함한 자기유변 탄성체에서 나타났으며 인가전류 3 A에서 최대 59%의 전단 모듈러스 변화율을 나타내었다. 또한 인가전류와 자기장 응답 입자의 첨가량이 증가할수록 자기유변 탄성체의 전달성은 감소하였고 흡수 주파수 영역은 증가하여 우수한 댐핑 특성을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.791-798
• /
• 2012

Since standardized fracture test specimens cannot be easily extracted from in-service components, several alternative fracture toughness test methods have been proposed to characterize the deformation and fracture resistance of materials. One of the more promising alternatives is the local approach employing the SP(Small Punch) testing technique. However, this process has several limitations such as a lack of anisotropic yield potential and tediousness in the damage parameter calibration process. The present paper investigates estimation of ductile fracture resistance(J-R) curve by FE(Finite Element) analyses using an anisotropic damage model and enhanced calibration procedure. In this context, specific tensile tests to quantify plastic strain ratios were carried out and SP test data were obtained from the previous research. Also, damage parameters constituting the Gurson-Tvergaard-Needleman model in conjunction with Hill's 48 yield criterion were calibrated for a typical nuclear reactor material through a genetic algorithm. Finally, the J-R curve of a standard compact tension specimen was predicted by further detailed FE analyses employing the calibrated damage parameters. It showed a lower fracture resistance of the specimen material than that based on the isotropic yield criterion. Therefore, a more realistic J-R curve of a reactor material can be obtained effectively from the proposed methodology by taking into account a reduced load-carrying capacity due to anisotropy.

• 한국지반공학회지:지반
• /
• 제8권2호
• /
• pp.31-44
• /
• 1992

지진하중을 받는 완전포화된 모래지반위에 구조물이 있을 경우(비등방상태) 또는 없을 경우 (등방상태)에 대하여 액화의 가능성을 평가하고 간극수압의 발생을 예측하기 위하여 확률론적 그리고 통계적 방법을 사용하였다. 본 연구를 수행하기 위하여 포화된 모래지반의 등방, 비등방상태하의 전단강도와 반복하중과 의 관계를 나타내는 동적전단강도계수들이 제시되었다. 이 전단강도계수들을 사용하여 지진에 의하여 발생되는 간극수압을 예측하는 프로그램과 그리고 저항과 하중계수들에 내포되어 있는 불확실성을 고려하여 액화가 일어날 확률을 구하는 프로그램을 3차원 Random Field Model을 사용하여 개발 하였다. 개발된 프로그램을 하나의 예제에 적용하였다. 그결과 등방상태가 비등방상태보다도 액화의 가능성이 높았고 상재하중이 커질수록 액화의 가능성은 낮았다. 또한 간극수압비는 Kc 값이 증가함에 따라 감소하는 경향을 나타내었다.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.831-838
• /
• 2014

Chip on glass (COG) bonding using anisotropic conductive film (ACF) is a key technology to assemble a driver IC onto a LCD glass panel. In this paper, an experimental investigation was conducted to investigate the correlation between contact resistance and characteristics of image taken by machine vision based inspection system. The results show that the contact resistance was strongly influenced by the contrast ratio of conductive particle rather than the number of conductive particles. Also, number of conductive particles whose contrast ratio is below 0.75 is crucial for determining the quality of the assembled samples. On the other hand, in the result of high temperature high humidity storage test, the contrast ratio of samples was increased. However, in the case of open-circuit samples after temperature humidity storage test, the number of conductive particles whose contrast ratio is above 0.75 was more than that of the closed-circuit samples.

• 한국화재소방학회논문지
• /
• 제9권1호
• /
• pp.10-19
• /
• 1995

Study on combined natural convection-radiation In partially open square enclosures filled with absorbing-anisotropic scattering media is performed. A heater block located in the enclosure causes the natural circulation of the fluid in the enclosure which results In significant in-flow of the cold fluid through the partially open wall. Four different locations of the heater are considered to observe the effect of the heater locations on the resulting heat transfer. Results obtained from the combined convection-radiation analyses show much stronger circulation of t he fluid inside the enclosure as compared to those obtained from the pure convection analyses. As the ratio of the open area is Increased, the inflow of the cold fluid and the circulation of the fluid inside the enclosure is increased causing lower fluid temperature Inside the enclosure. It is shown that the location of the heater influences the circulation and heat transfer significantly by showing stronger circulations and more uniform temperature distributions for the cases where the heater is located on the bottom wall as compared to those for the cases where the heater is located on the upper part wall of the enclosure. For pure absorbing medium, the expected circulation in the fluid is relatively week as compared to those with absorbing-scattering medium due to the smaller wall heating as the radiant heat is used to heat the fluid instead. The forward anisotropic scattering phase function is shown to increase the fluid circulation further as compared to the isotropic scattering medium.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.93-104
• /
• 2003

The crystals of group-Ⅲ nitride semiconductors with wurtzite structure exhibit a strong polarity. Especially, GaN has characteristics of different growth rate, anisotropic electrical and optical properties due to the polarity. In this work, GaN epilayer was grown and the polarities of the crystals were observed by the chemical wet etching and SP-EFM. GaN thin films were deposited on c-plane A1₂O₃ substrate under the variations of growth conditions by HVPE such as the deposition temperature of the buffer layer, the deposition time, the ratio of Group-V and Ⅲ and the deposition temperature of the film. The adquate results were obtained under the conditions of 500℃, 90 seconds, 1333 and 1080℃, respectively. It is observed that the GaN layer grown without the buffer layer has N-polarity and the GaN layer grown on the buffer layer has Ga-polarity. Fine crystal single particles were grown on c-plane A1₂O₃ and SiO₂, layer. The external shape of the crystal shows ｛10-11｝｛10-10｝(000-1) planes as expected in the PBC theory and anisotropic behavior along c-axis is obvious. As a result of etching on each plane, (000-1) and ｛10-11｝planes were etched strongly due to the N-polarity and ｛10-10｝ plane was not affected due to the non-polarity. In the case of the crystal grown on c-plane A1₂O₃, two types of crystals were grown. They were hexagonal pyramidal-shape with ｛10-11｝plane and hexagonal prism with basal plane. The latter might be grown by twin plane reentrant edge (TPRE) growth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2634-2648
• /
• 2020

In this paper, an adaptive sparse singular value decomposition (ASSVD) algorithm is proposed to estimate the signal matrix when only one data matrix is observed and there is high dimensional white noise, in which we assume that the signal matrix is low-rank and has sparse singular vectors, i.e. it is a simultaneously low-rank and sparse matrix. It is a structured matrix since the non-zero entries are confined on some small blocks. The proposed algorithm estimates the singular values and vectors separable by exploring the structure of singular vectors, in which the recent developments in Random Matrix Theory known as anisotropic Marchenko-Pastur law are used. And then we prove that when the signal is strong in the sense that the signal to noise ratio is above some threshold, our estimator is consistent and outperforms over many state-of-the-art algorithms. Moreover, our estimator is adaptive to the data set and does not require the variance of the noise to be known or estimated. Numerical simulations indicate that ASSVD still works well when the signal matrix is not very sparse.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.336-341
• /
• 2015

MnBi alloys were fabricated by arc melting and annealing at 573 K. The heat treatment enhanced the content of the low-temperature phase (LTP) of MnBi up to 83 wt%. The Bi-excess assisted LTP MnBi alloys were used in the hybridization with the Nd-Fe-B commercial Magnequench ribbons to form the hybrid magnets (100-x)NdFeB/xMnBi, x = 20, 30, 40, 50, and 80 wt%. The as-milled powder mixtures of Nd-Fe-B and MnBi were aligned in a magnetic field of 18 kOe and warm-compacted to anisotropic and dense bulk magnets at 573 K by 2,000 psi for 10 min. The magnetic ordering of two hard phase components strengthened by the exchange coupling enhanced the Curie temperature ($T_c$) of the magnet in comparison to that of the powder mixture sample. The prepared hybrid magnets were highly anisotropic with the ratio $M_r/M_s$ > 0.8. The exchange coupling was high, and the coercivity $_iH_c$ of the magnets was ~11-13 kOe. The maximum value of the energy product $(BH)_{max}$ was 8.4 MGOe for the magnet with x = 30%. The preparation of MnBi alloys and hybrid magnets are discussed in details.