• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.86-91
• /
• 2007

Gasohol, which is combined solution of gasoline and ethanol, is difficult to apply to the field, because it usually brings phase separation by mingling of water. We investigated phase separation by adding different concentrations of "Ethanol", anhydrous and fermentative, to "Gasolines", gasoline, gasoline base and naphtha, Placing ethanol itself open to the air, the concentrations of water are increased in length of time. The phase separation temperatures of the gasolines-ethanol solutions have dropped in the following order : gasoline, gasoline base and naphtha. When adding water to the solutions of gasolines and anhydrous ethanol, the temperatures of phase separation is higher when the concentration of water increases more. Thus, it is obvious that the water is sensitive in phase separation.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.19-24
• /
• 2010

Alloying degree is an important structural factor of PtRu catalysts for direct methanol fuel cells (DMFC). In this work, carbon supported PtRu catalysts were synthesized by reduction method using anhydrous ethanol as a solvent and $NaBH_4$ as a reducing agent. Using anhydrous ethanol as a solvent resulted in high alloying degree and good dispersion. The morphological structure and crystallanity of synthesized catalysts were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM). CO stripping and methanol oxidation reaction were measured. Due to high alloying degree catalyst prepared in anhydrous ethanol, exhibited low onset potential for methanol oxidation and negative peak shift of CO oxidation than commercial sample. Consequently, samples, applying ethanol as a solvent, exhibited not only enhanced CO oxidation, but also increased methanol oxidation reaction (MOR) activity compared with commercial PtRu/C (40 wt%, E-tek) and 40 wt% PtRu/C prepared in water solution.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.37-46
• /
• 2010

Cu nano-colloid was prepared by wire electric explosion process under de-mineralized water and anhydrous ethanol. To control the properties of Cu nano-colloid, experimental conditions such as diameter of Cu wire and applied voltage were changed. The optimal Cu nano-colloid was prepared when the 0.1mm diameter of Cu wire with the applied voltage of 2000 V was used. The shape of Cu particles in colloid was spherical and the XRD result revealed that the phase of Cu particles was cubic phase. About 20nm Cu nanoparticles with high crystallinity were successfully prepared using wire explosion process under anhydrous ethanol and they showed more than 100 hours dispersion stability.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.673-677
• /
• 2001

Pseudo-first-order rate constants have been measured spectrophotometrically for the reactions of 8-(5-nitroquinolyl) 3-furoate with alkali metal ethoxides in anhydrous ethanol. The plot of kobs vs the concentration of alkali metal ethox ides is linear for the reactions performed in the presence of a complexing agent, 18-crown-6 ether, but exhibits upward curvatures for the corresponding reactions performed in the absence of the complexing agent, indicating that the alkali metal ions in this study behave as catalysts. Second-order rate constants were determined for the reactions with dissociated free ethoxide (kEtO-) and with ion paired alkali metal ethoxides (kEtO-M + ) from ion pairing treatments. The magnitude of catalytic effect (kEtO-M + /kEtO-) was found to be 1.7, 3.4 and 2.5 for the reaction of 8-(5-nitroquinolyl) 3-furoate, while 1.4, 3.6 and 4.2 for that of 4-nitrophenyl 2-furoate, 1.8, 3.7 and 2.4 for that of 8-(5-nitroquinolyl) benzoate, and 2.0, 9.8 and 9.3 for that of 8-(5-nitroquinolyl) 2-furoate with EtO- Li+ , EtO- Na+ and EtO- K+ , respectively. A 5-membered chelation at the leaving group is suggested to be responsible for the catalytic effect shown by alkali metal ions.

• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.109-115
• /
• 2017

The aim of this study is to investigate the effect of physical properties of fuels on spray characteristics in the gasoline direct injection system. Injection rate, spray visualization, and spray pattern experiments were performed to analyze the spray characteristics of ethanol, gasoline, and ethanol/gasoline blends. We measured injection rate of each fuel via the Bosch method. The spray visualization experiment was also carried out at atmospheric pressure using a high-speed camera. Finally, the average of drop surface area per unit volume was measured using the optical patternator. The experimental results from Bosch method showed that peak injection rate increased when the volume fraction of ethanol increased. In addition, higher viscosity of ethanol than that of gasoline leads to longer injection delay. At the initial injection region before reaching 0.8 ms, the spray tip penetration becomes longer as increasing the volume fraction of ethanol, but reversely shorter after 0.8 ms. It was found that ethanol makes spray angle become larger. The surface area per unit volume of the drop was decreased as the distance from the injection tip or the concentration of the gasoline increased.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.474-481
• /
• 2005

In this study, modeling and optimization work were performed to obtain nearly pure anhydrous ethanol from aqueous ethanol mixtures using benzene as an entrainer. NRTL liquid activity coefficient model was adopted for phase equilibrium calculations and PRO/II with PROVISION 6.01, a commercial process simulator, was used to simulate the azeotropic distillation process. We used the total reboiler heat duties as an objective function and the concentration of ethanol at concentrator top as a manipulated variable. As a result, 76 mole percent of ethanol at concentrator top gave an optimum value which minimized the total reboiler heat duties of three distillation columns.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.303-308
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl benzoate (5a), 4-nitrophenyl 4-methoxybenzoate (5b), and 4-nitrophenyl 4-hydroxybenzoate (5c) with alkali metal ethoxides, $EtO^-M^+$ ($M^+=Li^+$, $Na^+$ and $K^+$) in anhydrous ethanol (EtOH) at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [$EtO^-M^+$] exhibit upward curvatures in all cases, indicating that $M^+$ ions catalyze the reactions and ionpaired $EtO^-M^+$ species are more reactive than dissociated $EtO^-$. Second-order rate constants for reactions with dissociated $EtO^-$ and ion-paired $EtO^-M^+$ (i.e., $k_{EtO^-}$ and $k_{EtO^-M^+}$, respectively) have been calculated from ion-pair treatment for the reactions of 5a and 5b. However, such ion-pair treatment has failed to determine $k_{EtO^-}$ and $k_{EtO^-M^+}$ values for the reactions of 5c. It has been concluded that reactions of 5a and 5b are catalyzed by one metal ion, which increases electrophilicity of the reaction center through coordination on the carbonyl oxygen. In contrast, reactions of 5c have been suggested to involve two metal ions, i.e., the one coordinated on the carbonyl oxygen increases the electrophilicity of the reaction center while the other one associated on the phenoxy oxygen decreases the charge repulsion between the anionic reagents (i.e., $EtO^-$ and deprotonated 5c). It has been found that the rate equation derived from the mechanism involving two metal ions fits nicely to the kinetic results obtained for the reactions of 5c.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1951-1956
• /
• 2011

A kinetic study is reported on nucleophilic substitution reactions of 4-nitrophenyl nicotinate 5 and isonicotinate 6 with alkali metal ethoxide EtOM (M = K, Na, and Li) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. Plots of pseudo-first-order rate constant $k_{obsd}$ vs. EtOM concentration exhibit upward curvature for the reactions of 5 and 6 with EtOK and EtONa but are almost linear for those with EtOLi. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has shown that $k_{EtOK}$ ${\geq}$ $k_{EtONa}$ > $k_{EtO^-}$ but $k_{EtOLi}$ < $k_{EtO^-}$. It has been concluded that $K^+$ and $Na^+$ ions catalyze the reactions by increasing the electrophilicity of the carbonyl carbon atom through formation of a 4-membered cyclic transition state $TS_3$ or $TS_4$. However, $M^+$ ion catalysis has been found to be much less significant for the reactions of 5 and 6 than for the corresponding reactions of 4-nitrophenyl picolinate 4, which was reported to proceed through a 5-membered cyclic transition state $TS_2$. Although 5 and 6 are significantly more reactive than 4-nitrophenyl benzoate 3, the reactions of 5 and 6 result in smaller $k_{EtOK}/k_{EtO^-}$ ratios than those of 3. The electron-withdrawing ability of the nitrogen atom in the acyl moiety of 5 and 6 has been suggested to be responsible for the increase in reactivity and the decrease in the $k_{EtOK}/k_{EtO^-}$ ratio.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.117-121
• /
• 2008

Pseudo-first-order rate constants (kobsd) have been measured spectrophotometrically for nucleophilic substitution reactions of 5-nitro-8-quinolyl benzoate (5) with alkali metal ethoxides, EtO?M+ (M+ = Li+, Na+ and K+) in anhydrous ethanol (EtOH) at 25.0 0.1 C. The plots of kobsd vs. [EtO?M+] exhibit upward curvatures, while the corresponding plots for the reactions of 5 with EtO?Na+ and EtO?K+ in the presence of complexing agents, 15-crown-5-ether and 18-crown-6-ether are linear with rate retardation. The reactions of 5 with EtO?Na+ and EtO?Li+ result in significant rate enhancements on additions of Na+ClO4, indicating that the M+ ions behave as a catalyst. The dissociated EtO and ion-paired EtOM+ have been proposed to react with 5. The second-order rate constants for the reactions with EtO (kEtO) and EtOM+ (kEtOM+) have been calculated from ion-pairing treatments. The kEtO and kEtOM+ values decrease in the order kEtONa+ > kEtOK+ > kEtOLi+ > kEtO, indicating that ion-paired EtOM+ species are more reactive than the dissociated EtO ion, and Na+ ion exhibits the largest catalytic effect. The M+ ions in this study form stronger complex with the transition state than with the ground state. Coordination of the M+ ions with the O and N atoms in the leaving group of 5 has been suggested to be responsible for the catalytic effect shown by the alkali metal ions in this study.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2483-2487
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) were measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl picolinate (6) with alkali metal ethoxides (EtOM, $M^+\;=\;K^+$, $Na^+$ and $Li^+$) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] exhibits upward curvature regardless of the nature of $M^+$ ions. However, the plot for the reaction of 6 with EtOK is linear with significantly decreased $k_{obsd}$ values when 18-crown-6-ether (18C6, a complexing agent for $K^+$ ion) is added in the reaction medium. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that ion-paired EtOM is 3~17 times more reactive than dissociated $EtO^-$. The reaction has been proposed to proceed through a 5-membered cyclic transition state, in which $M^+$ ion increases the electrophilicity of the reaction site. Interestingly, $Na^+$ ion exhibits the largest catalytic effect. The presence of a nitrogen atom in the pyridine moiety of 6 has been suggested to be responsible for the high $Na^+$ ion selectivity.