• Title/Summary/Keyword: Angle measurements

Search Result 1,336, Processing Time 0.03 seconds

CHANGES IN TONGUE POSITION, AIRWAY WIDTH, GONIAL ANGLE, LOWER FACIAL HEIGHT AFTER BILATERAL SAGITTAL SPLIT RAMUS OSTEOTOMY IN MANDIBULAR PROGNATHIC PATIENTS (하악전돌증 환자의 하악지분할시상골절단술 후 혀의 위치, 기도의 폭경, 하악각 및 구강용적의 변화)

  • Lee, Kyu-Hong;Hwang, Yong-In;Kim, Yoon-Ji;Cheon, Se-Hwan;Kim, Hyung-Wook;Park, Jun-Woo;Rhee, Gun-Joo;Park, Yang-Ho
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.33 no.2
    • /
    • pp.109-113
    • /
    • 2007
  • Introduction. In patients with mandibular prognathism, Bilateral Sagittal Split Ramus Osteotomy(BSSRO) combined with orthodontic treatment reduces oral volume and influences tongue and other surrounding tissues. Purpose of this study was to analyze post-operative tongue position and airway dimension, as well as mandibular changes in vertical, horizontal, and angular dimensions. Materials and methods. Height of dorsum of tongue, width of airway, gonial angle and lower facial height of mandibular prognathic patients who visited Kangdong Sacred Heart Hospital from Jan. 2001 to Dec. 2006 were anaylzed via pre-operative and post-operative cephalograms. T-test was used to compare pre-operative and post-operative measurements. Also, correlations among pre-operative measurements of the patients were analyzed. Results and conclusion. A significant correlation was shown between ANS-Xi-PM area and location of dorsum of tongue in pre-operative patients. A significant superior movement of tongue and decrease of airway width was observed in post-operative patients. Also the upper gonial angle decreased significantly.

The Effects of Sling and Resistance Exercises on Muscle Activity and Pelvic Rotation Angle During Active Straight Leg Raises and Pain in Patients with Chronic Low Back Pain (만성 허리통증 환자에게 슬링과 기구저항운동이 통증과 능동 뻗은발올림 동안 근활성도, 골반 회전각에 미치는 영향)

  • Kim, Dae-Hyun;Kim, Tae-Ho
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.13 no.4
    • /
    • pp.113-121
    • /
    • 2018
  • PURPOSE: This study was conducted to identify a more effective intervention in sling and resistance exercise for chronic low back pain patients. METHODS: Seventy (70) subjects were randomly divided into the sling group (SG) and resistance exercise group (REG). Muscular activity of the internal oblique (IO), external oblique (EO), rectus abdominis (RA), and pelvic rotation angle during active straight leg raise (ASLR), a pressure pain threshold (PPT) and a visual analog scale (VAS) were measured. Sling and resistance exercises were conducted for 12 weeks. Intermediate measurements were taken after 8 weeks and final measurements were taken after 12 weeks. RESULTS: Both groups showed significantly decreased RA muscle activity and significantly increased IO muscle activity (p<.05). Additionally, EO muscle activity was significantly decreased in the REG, but significantly increased in the SG (p<.05), while the pelvic rotation angle and VAS were significantly decreased in the SG (p<.05). The pressure pain threshold was significantly increased in both groups (p<.05). CONCLUSION: Based on the results of this study, a 12-week intervention seems to be effective at improving back pain in both groups. However, a lower VAS was seen in the sling group after 8 weeks of intervention. Therefore, it is recommended that the sling be applied first when establishing a chronic back pain treatment program to shorten the treatment period and reduce the pain period.

A Study on S-Band Phased Array Antenna System for Receiving LEO Satellite Telemetry Signals (저궤도 위성 원격측정데이터 신호 수신을 위한 S-대역 위상배열안테나 시스템 연구)

  • Lee, Dong-Hyo;Seo, Jung-Won;Lee, Myoung-Sin;Chung, Daewon;Lee, Dongkook;Pyo, Seongmin
    • Journal of IKEEE
    • /
    • v.26 no.2
    • /
    • pp.211-218
    • /
    • 2022
  • This paper presents a S-band phased array antenna system for receiving LEO satellite telemetry signals. The proposed antenna, which is performed to be beam-tiled along the elevation direction, consists of 16 sub-array assemblies, 16 active circuit modules, a perpendicular feed network and a control/power unit. In order to precisely track an LEO satellite, the developed antenna is placed with its elevation axis along the projected trajectory of the satellite on the earth. The center of antenna aperture is facing to the maximum elevation angle in the LEO trajectory. The beam-tilted angles for tracking LEO satellite are obtained by calculating accurately satellite points. Satellite tracking measurements are carried out in the range of ±30° with the respect to the maximum elevation angle. The S/N ratio of 16.5 dB and the Eb/No of 13.3 dB at the maximum elevation angle are obtained from the measurements. The measured result agrees well with the pre-analyzed system margin.

Correlation of Cervical Disc Degeneration with Sagittal Alignments of Cervical Spine (두경부 시상면 정렬과 경추 추간판 퇴행성 변화와의 상관관계)

  • Jeon, Dae Geun;Park, Jinyoung;Park, Jung Hyun;Yun, Wang Hyeon
    • Clinical Pain
    • /
    • v.18 no.1
    • /
    • pp.8-15
    • /
    • 2019
  • Objective: To determine the relationship between cervical sagittal parameters and the degree of the cervical disc degeneration at each cervical level by using cervical plain radiographs and disc degeneration grading. Method: This study analyzed 110 patients with posterior neck pain. Cervical radiographic measurements included the occipito-cervical (O~C2) angle; sagittal Cobb angles of C1~C2, C2~C7; and sagittal vertical axis (SVA) of C1~C7 and C2~C7. The degenerations of cervical discs at each level were evaluated through Pfirrmann grading system by magnetic resonance images of the cervical spine. The correlations between the cervical sagittal measurements and the disc degeneration at each level were analyzed by Spearman's correlation. Results: A significant correlation was found for the C2~C7 angle with disc degenerations at C2~C6 levels. O~C2 angle was correlated significantly with disc degenerations at C2~C4 and C5~C7 levels. There was significant correlation between C1~C2 angle and disc degeneration at C6~C7 level. No significant relationship was found between the cervical SVA and the cervical disc degeneration at all cervical levels. Conclusion: Cervical sagittal parameters representing cervical angles (C2~C7, O~C2, and C1~C2 angles) were significantly correlated with the degree of the cervical disc degeneration. These findings suggest that the loss of the natural cervical lordosis rather than loss of natural SVA could be correlated with progression of the cervical disc degeneration.

The effect of CR-CO discrepancy on cephalometric measurements in Class III malocclusion patients (골격성 III급 부정교합자에서 중심위 변위가 두부 방사선 계측치에 미치는 영향)

  • Park, Yang-Soo;Kim, Jong-Chul;Hwang, Hyeon-Shik
    • The korean journal of orthodontics
    • /
    • v.26 no.3
    • /
    • pp.255-265
    • /
    • 1996
  • The purpose of this study was to investigate if there were a significant difference between cephalometric measurements of mandibular position derived from a centric occlusion tracing compared to those of a converted centric relation tracing in the Class III malocclusion. The sample consisted of 25 Class III malocclusion and 25 normal occlusion persons who had no orthodontic treatment. The records included an lateral cephalometrics in centric occlusion, centric relation and centric occlusion bite registration and diagnostic casts mounted on the SAM II articulator in CR. The amount of CR-CO discrepancy of condyle was recorded using a MPI(Mandibular Position Indicator, MPI $200^{(R)}$, Great Lakes Orthodontics, USA). The conversion of the CO cephalogram to CR using the MPI readings was performed on the Conversion work sheet. Measures of mandibular position were chosen for the purpose of this study. The comparison of the difference between CO and CR cephalometric measurements in the normal occlusion and Class III malocclusion group were studied. The results were as follows: 1. In the features of CR-CO discrepancy of the condyle, the condyle was displaced posterior and inferior when the teeth were in centric occlusion. The horizontal component(${\Delta}X$) in Class HI malocclusion group was greater than the vertical component(${\Delta}Z$) and also greater than the horizontal component(${\Delta}X$) in normal occlusion group. There was no statistically significant correlation between MPI measurements and the groups of normal occlusion and Class III malocclusion group. 2. In the comparison of the cephalometric measurements in each group, Normal occlusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity and ODI. Class HI malocclusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP and it had more significance than the normal occlusion group. 3. The Value of cephalometric measurements was significantly different between CO and CR but there were no differences between the groups of normal occlusion and Class III malocclusion. The results of this study suggest that if the discrepancies are greater than the amount of normal displacement from clinically captured centric relation, centric relation should be considered as the starting point for proper diagnosis and treatment planning.

  • PDF

THE CORRECTION OF CLASS III MANDIBULAR ASYMMETRY USING BILATERAL SAGITTAL SPLIT RAMUS OSTEOTOMY AND LATERAL ANGLE REDUCTION (외측 하악각 골절제술을 동반한 시상분할골절단술을 통한 골격성 3급 하악골 비대칭 환자의 치료)

  • Kang, Hee-Jea;Song, In-Woo;Kang, Yung-Ki;Kim, Jong-Ryoul
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.32 no.2
    • /
    • pp.132-140
    • /
    • 2010
  • Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.

Development of Topological Correction Algorithms for ADCP Multibeam Bathymetry Measurements (ADCP 다중빔 수심계측자료의 위상학적 보정 알고리즘 개발)

  • Kim, Dong-Su;Yang, Sung-Kee;Kim, Soo-Jeong;Jung, Woo-Yul
    • Journal of Environmental Science International
    • /
    • v.22 no.5
    • /
    • pp.543-554
    • /
    • 2013
  • Acoustic Doppler Current Profilers (ADCPs) are increasingly popular in the river research and management communities being primarily used for estimation of stream flows. ADCPs capabilities, however, entail additional features that are not fully explored, such as morphological representation of river or reservoir bed based upon multi-beam depth measurements. In addition to flow velocity, ADCP measurements include river bathymetry information through the depth measurements acquired in individual 4 or 5 beams with a given oblique angle. Such sounding capability indicates that multi-beam ADCPs can be utilized as an efficient depth-sounder to be more capable than the conventional single-beam eco-sounders. The paper introduces the post-processing algorithms required to deal with raw ADCP bathymetry measurements including the following aspects: a) correcting the individual beam depths for tilt (pitch and roll); b) filtering outliers using SMART filters; d) transforming the corrected depths into geographical coordinates by UTM conversion; and, e) tag the beam detecting locations with the concurrent GPS information; f) spatial representation in a GIS package. The developed algorithms are applied for the ADCP bathymetric dataset acquired from Han-Cheon in Jeju Island to validate themselves applicability.

Development of Servo Type Angle-of-Attack Sensor for UAV (무인항공기용 서보형 받음각센서 개발)

  • Park, Mi-Hyun;Kim, Sung-Su;Ryoo, Chang-Kyung;Choi, Kee-Young;Park, Choon-Bae
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.5
    • /
    • pp.511-517
    • /
    • 2009
  • A servo type angle of attack sensor using the null-seeking method is designed and its characteristics are analyzed in this study. Angle-of-attack in the null-seeking method is given by the probe rotation angle with respect to the body reference line when pressure difference measured in two holes on the probe becomes zero. This method provides highly accurate and uniform angle-of-attack measurements over all range. Hence, this kind of angle-of-attack sensor is adequate for unmanned aerial vehicles(UAVs). In this paper, we first analyze the requirements for developing angle-of-attack sensors. And the servo type angle-of-attack sensor is then designed and fabricated. The on-board angle-of-attack calculation algorithm is also developed. Finally, the characteristics of the developed angle-of-attack sensor are identified through MATLAB Simulink and wind tunnel tests.

The $4^{th}-5^{th}$ Intermetatarsal Angle and the $5^{th}$ Metatarsophalangeal Angle of Young Men in Korea (한국 정상 젊은 남성에서의 제 4-5 중족골간 각 및 제 5 근위-종족골간 각)

  • Lee, Kyung-Tai;Lee, Young-Koo;Yim, Su-Jae;Young, Ki-Won;Park, Shin-Yi;Kim, Hyung-Tae
    • Journal of Korean Foot and Ankle Society
    • /
    • v.13 no.1
    • /
    • pp.46-49
    • /
    • 2009
  • Purpose: The purpose of this study is to find out the normal angles of forefoot for diagnosis of bunionette deformity in Korea. This would be helpful as it would provide a basic angular measurement of bunionette deformity that indicates the need for operation. Materials and Methods: Within a period of four months from January 2007 to April 2007. We have established 300 males and 600 feet without trauma history of foot. The source to image distance is 40 inches and erect weight bearing radiographs are obtained in anteroposterior and lateral projections. The significant angular measurements that define a bunionette deformity are the fourth-fifth intermetatarsal angle, the fifth metatarsophalangeal angle Results: The mean age was 21 years(19-22 years) old. The mean $4^{th}-5^{th}$ intermetatarsal angle was $9.4{\pm}4.7^{\circ}$, the mean $5^{th}$ metatarsophalangeal angle was $7.9{\pm}9.2^{\circ}$. Conclusion: We can consider over the $14.1^{\circ}$ on the $4^{th}-5^{th}$ intermetatarsal angle and over $17.1^{\circ}$ on the $5^{th}$ metatarsophalangeal angle as an operational indication.

  • PDF

Design of Linear Recursive Target State Estimator for Collision Avoidance System (차량 충돌 방지 시스템을 위한 선형 순환 표적 추정기 설계)

  • Han, Seul-Ki;Ra, Won-Sang;Whang, Ick-Ho;Park, Jin-Bae
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1740-1741
    • /
    • 2011
  • This paper proposes a new linear recursive target state estimator for automotive collision warning system. The target motion is modeled in Cartesian coordinate system while the radar measurements such as range, line-of-sight angle and range rate are obtained in polar coordinate system. To solve the problem by nonlinear relation between these two coordinate system, a practical linear filter design scheme employing the predicted line-of-sight Cartesian coordinate system (PLCCS) is proposed. Especially, PLCCS can effectively incorporate range rate measurements into target tracking system. It is known that the utilization of range rate measurements enables the improvement of target tracking performance. Moreover, PLCCS based target tracking system is implemented by linear recursive filter structure and hence is more suitable scheme for the development of reliable collision warning system. The performance of the proposed method is demonstrated by computer simulations.

  • PDF