• 천문학회보
• /
• 제40권1호
• /
• pp.61.3-62
• /
• 2015

Remote-sensing observation is one of the observation methods that provide valuable information, such as composition and surface physical conditions of solar system objects. The Hayabusa spacecraft succeeded in the first sample returning from a near-Earth asteroid, (25143) Itokawa. It has established a ground truth technique to connect between ordinary chondrite meteorites and S-type asteroids. One of the scientific observation instruments that Hayabusa carried, Asteroid Multi-band Imaging Camera(AMICA) has seven optical-near infrared filters (ul, b, v, w, x, p, and zs), taking more than 1400 images of Itokawa during the rendezvous phase. The reflectance of planetary body can provide valuable information of the surface properties, such as the optical aspect of asteroid surface at near zero phase angle (i.e. Sun-asteroid-observer's angle is nearly zero), light scattering on the surface, and surface roughness. However, only little information of the phase angle dependences of the reflectance of the asteroid is known so far. In this study, we investigated the phase angle dependences of Itokawa's surface to understand the surface properties in the solar phase angle of $0^{\circ}-40^{\circ}$ using AMICA images. About 700 images at the Hayabusa rendezvous phase were used for this study. In addition, we compared our result with those of several photometry models, Minnaert model, Lommel-Seeliger model, and Hapke model. At this conference, we focus on the AMICA's v-band data to compare with previous ground-based observation researches.

• 한국자기학회지
• /
• 제7권3호
• /
• pp.134-139
• /
• 1997

비정질 $Co_{66}$Fe$_{4}$NiB$_{14}$Si$_{15}$에서 리본의 종방향에 대하여 여러 가지 각도를 갖는 시편을 식각법으로 제작하여 100 kHz의 교류전류에서 4 단자법으로 MI 신호를 측정하였다. H=0 근처에서 30 .deg. 시편부터 dip이 나타났으며, 그 크기는 각도에 따라 단조증가하였다. 자기장 크기에 따라 Mi 신호는 증가하였고, 일정한 자기장에서 식각각도에 따라 MI 신호는 증가하다가 90 .deg. 시편에서 감소하였다.

• 오토저널
• /
• 제10권4호
• /
• pp.85-96
• /
• 1988

제품생산의 고정밀화 및 고품질화로 정밀 절삭가공에서 공구의 형사에 따라 많은 변수가 있으므로 공구의 상면 경사각을 변화시키면서 절삭저항, 비절삭저항, 거칠기 등을 energy mothod에 의하여 최적조건을 구한 결과(6-4) brass 에서는 경사각 20.deg., 25.deg.에서 Al alloy 에서는 0.deg., 20.deg.에서 가장 작게 나타났으며 거칠기는 (6-4)brass 에서는 경사각 20.deg. 에서 Al alloy에서는 15.deg.에서 가장 작게 나타났다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.287-301
• /
• 2013

The present paper deals with the problems of yaw angle effects on podded propulsor performance. The study aims at providing insights on characteristics of podded propulsors in azimuthing condition. In this regard, a wide numerical simulation that concerned yaw angle effect measurement on podded propeller performance was performed. The Reynolds-Averaged Navier Stokes (RANS) based solver is used in order to study the variations of hydrodynamic characteristics of podded propulsor at various angles. At first, the propeller is analyzed in open water condition in absence of pod and strut. Next flow around pod and strut are simulated without effect of propellers. Finally, the whole unit is studied in zero yaw angle and azimuthing condition. Structured and unstructured mesh techniques are used for single propeller and podded propulsor. The performance curves of the propeller obtained by numerical method are compared and verified by the experimental results. The characteristic parameters including the torque and thrust of the propeller, the axial force and side force of unit are presented as function of velocity advance ratio and yaw angle. The results shows that the propeller thrust, torque and podded unit forces in azimuthing condition depend on velocity advance ratio and yaw angle.

• Physical Therapy Rehabilitation Science
• /
• 제9권1호
• /
• pp.49-54
• /
• 2020

Objective: The purposes of this study was to evaluate the diagnostic values of abdominal muscles thickness and sterno-costal angle as the quantitative diagnostic indicators for young adults with rounded shoulders. Design: A observational, cross-sectional study. Methods: This study included thirty-three male participants in order to examine the relationship among thoracic kyphosis, sternocostal angle, and abdominal muscle thickness. We used ultrasound imaging to measure the muscle thickness, two gravity-dependent inclinometers to measure the kyphosis angle, and Image J to measure the sterno-costal angle. Results: There was a significant positive correlation between the amount of thoracic kyphosis angle and muscle thickness of the external oblique (EO) on the right side (r=0.931), and on the left side (r=0.432), and the transverse abdominis (TrA) (r=0.649). There was also a significant negative correlation between the thoracic kyphosis angle and the sterno-costal angle at the right side (r=-0.942) and at the left side (r=-0.860). There was a significant positive relationship with muscle thickness of the EO and TrA on the right side with the thoracic kyphosis angle, and was significant negative relationship with the sterno-costal angle on both sides. Conclusions: The results of the study suggest that the thoracic kyphosis angle is related to muscle thickness of the EO and TrA on the dominant side and the sterno-costal angle. We also suggest that future studies are needed to determine how strengthening the abdominal muscles may contribute to preventing excessive thoracic kyphosis in young adults.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.9-15
• /
• 2013

PURPOSE. The purpose of this study was to determine accurately the part of the tragus to be used to form the Ala-Tragal line or Camper's line in orthognathic profile patients. MATERIALS AND METHODS. 150 dentate subjects with age of 18-40 years with orthognathic profile were sampled. Life-size lateral digital photographs of the face with fox plane were taken in natural head position. Different angles between Eye-Ear plane and occlusal plane ($OT_1$-OP), Eye-Ear plane and ala-superior border of tragus ($OT_1-AT_1$), Eye-Ear plane and ala-middle border of tragus ($OT_1-AT_2$) and Eye-Ear plane and ala-inferior border of tragus ($OT_1-AT_3$) were calculated using computer software package, AutoCAD 2004. From the three angles formed by the Eye-ear plane ($OT_1$ or FH plane) and the ala-tragal lines, the one closest to the angle formed between Eye-Ear plane ($OT_1$) and occlusal plane (OP) was used to determine the occlusal plane of orientation. The obtained results were subjected to ANOVA F test, Tukey's Honestly significant difference test, followed by Karl Pearson coefficient of correlation test. P values of less than 0.05 were taken as statistically significant. RESULTS. The mean of base line angle i.e. $OT_1$-OP angle ($11.96{\pm}4.36$) was found to be close to $OT_1-AT_2$ angle ($13.67{\pm}1.93$) and $OT_1-AT_3$ angle ($10.31{\pm}2.03$), but $OT_1$-OP angle was found to be more closer to $OT_1-AT_3$ angle. Comparison of mean angles showed that $OT_1$-OP angle in both males (11.68) and females (12.51) is close to $OT_1-AT_3$ angle (males- 11.01, females- 11.95). CONCLUSION. The line joining from ala to the lower border of the tragus was parallel to the occlusal plane in 53.3% of the subjects. There was no influence of the sex on the level of occlusal plane.

• 한국전문물리치료학회지
• /
• 제6권1호
• /
• pp.23-34
• /
• 1999

The purposes of this study were to investigate biomechanical variables of the lumbar spine for women who enjoy recreational exercises regularly, and to determine the factors that influence these variables. These variables were determined by the X-ray pictures of the lumbar area of 80 housewives who visited the department of rehabilitation at the Y Hospital from October 1997 to March 1998. The sacral inclination angle, the sacrohorizontal angle, the lumbosacral joint angle, and the lumbar lordotic angle were analysed. The t-test, correlation analysis, and multiple regression analysis were used to determine the significant differences and relationships among variables. The result were as follows: 1) There was a significant difference in the sacral inclination angle (p<0.01), the sacrohorizontal angle (p<0.05) and the lumbar lordotic angle (p<0.05) between the bilateral and the unilateral exercise group. 2) With the sacral inclination angle, the sacrohorizontal angle, the lumbosacral joint angle and the lumbar lordotic angle, correlation was found between the sacral inclination angle and the sacrohorizontal angle (p<0.01), the sacral inclination angle and the lumbosacral joint angle (p<0.05), the sacral inclination angle and the lumbar lordotic angle (p<0.05), and the sacrohorizontal angle and the lumbosacral joint angle (p<0.01). 3) In the bilateral exercise group, the sacral inclination angle correlated with age (p<0.01). The sacrohorizontal angle correlated with age (p<0.01) and exercise time (p<0.01). The lumbar lordotic angle correlated with age (p<0.05) and exercise duration (p<0.05). In the unilateral exercise group, the sacral inclination angle correlated with age (p<0.01), while the sacrohorizontal angle correlated with age (p<0.01) and exercise duration (p<0.05). The lumbar lordotic angle correlated with age (p<0.05).

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제33권3호
• /
• pp.295-317
• /
• 2019

각 개념은 교육과정 전반에 걸쳐 나타나는 개념이며, 기하 단원에서 기본적인 개념이다. 각은 다면적인 성격을 갖고 있으며 이후 학습에 영향을 주므로 학생들이 다양한 각 개념을 이해하는 것이 필요하다. 본 연구에서는 싱가포르, 영국, 호주, 미국을 비교 대상국가로 정하여 교육과정에서 나타나는 각 관련 내용 요소와 학습시기를 전체적으로 살펴 본 뒤 각에 대한 관점과 각의 크기 측면을 상세하게 살펴보고 이를 바탕으로 우리나라 교육과정에 시사점을 주고자 한다. 분석 결과 우리나라를 제외한 4개국은 보각, 여각, 직선 위의 각, 한 점에서의 각, 각도 구하기를 교육과정에 명시하여 다루고 있으며, 특정 학년에서 집중적으로 각 관련 내용을 학습하는 우리나라에 비해 대부분의 국가가 여러 학년에 걸쳐 점진적으로 각 관련 내용을 다루고 있었다. 대부분의 국가가 각의 정의는 정적인 관점에서, 각의 크기는 동적인 관점에서 서술하고 있었으며, 동적인 관점을 초등학교에서 도입하는 다른 국가에 비해 우리나라는 비교적 늦은 중학교에서 동적인 관점이 처음으로 나타났다. 교육과정에서 다루는 각의 크기의 범위는 우리나라가 다른 국가보다 좁았다. 이를 통해 우리나라 교육과정에 각의 성질과 관련된 다양한 내용 요소를 어떻게 배치하고 전개해 나갈지 논의할 것, 각의 다면적인 성격을 고려하여 정적인 관점뿐만 아니라 동적인 관점을 모두 활용하여 각을 다룰 것, 회전량으로서 각의 크기를 도입하여 우각 및 $180^{\circ}$, $360^{\circ}$ 크기의 각을 학습할 것을 제안한다.

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.165-178
• /
• 2020

This paper investigates the effect of the jaw's curvature, also known by contact angle and jaw arc central angle (2α), of the Brazilian test apparatus on indirect tensile strength of various rock types. That's why, ten rock samples including limestone, marble, skarn, granite, diorite, and granodiorite were collected from some quarries in different provinces of Iran. Petrographic, mineralogical and textural investigations were performed using thin section analyses. Physical properties of the selected rock samples namely dry and saturated unit weights, porosity, water absorption, and specific gravity were determined for the rock samples. In addition, Brazilian tensile strength at different 2α angles (i.e., 2α = 0°, 10°, 15°, 20°, 45°, and 60°) were determined for the rocks in the laboratory. Results show that the parameter for the rocks is between 3.81 MPa at 2α=0° and 54.76 MPa at 2α=60°. This means that Brazilian tensile strength increased with increasing 2α angle from 0° to 60°. Also, it was found that the highest change rate of the Brazilian tensile strength occurs in range of 2α=15°-30° for most studied rock samples. In some tested samples, the parameter is decreased only at 2α = 60°. The values of Brazilian tensile strength of the rocks tested by flat and standard jaws are near to each other.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.345.2-345.2
• /
• 2016

Alumina (Al2O3) doped zinc oxide (ZnO) films (AZO) have been prepared from 2 wt.% Al2O3 doped ZnO target by DC magnetron sputtering at a 2 mTorr (0.27 Pa) chamber pressure in (15 sccm) argon ambient. We obtained films of various opto-electronic properties by variation of target angle from 32.5o to 72.5o. At lower target angle deposited films show higher values in optical gap, mobility of charge carrier, carrier concentration, crystallite grain size, transmission range of wavelength, which are favorable characteristics of AZO as a transparent conducting oxide (TCO). At higher target angle the sheet resistance, work function, surface roughness for the AZO films increases. Measured haze ratio of the films changed lower to higher and size of characteristic surface structure of as deposited film ranges from ~40 nm to ~300 nm. By a combination of low and high target angle we obtained a textured TCO film with high conductivity.