• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.374-374
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.949-957
• /
• 2003

This paper presents a gradient ON-OFF algorithm of which the performance is very robust even when the angle spread increases in the mobile communication environments. The proposed method getting the diversity gain by utilizing the primary and secondary eigenvector, which corresponds to the largest and the second largest eigenvalue of the autocovariance matrix of the received signal vector, outperforms the method which just utilizes one eigenvector. By applying the proposed method to IS-2000 1X signal environments, it is observed that the proposed method shows excellent performance compared to a typical beamforming method using just one eigenvector, which considerably degrades the receiving performance as the angle spread increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.177-184
• /
• 2018

In this paper, we analyze the characteristics of the antenna by changing the structure of the radiator and the angle of the branch of the array patch antenna. First, the structure of the radiator was changed from the rectangular patch to a hexagonal patch, a triangular patch. Secondly, we changed the angle of the feeder branch to $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$. When the branch angle is $10^{\circ}$, the measured 10dB frequency band is 23.38 GHz-24.19GHz and the bandwidth is 810MHz. The fabricated antenna has a gain of 9.65-10.06dBi at 24.05 GHz. The beam width of the main lobe is $12^{\circ}$, and the antenna size is $70{\times}36mm^2$. In addition to the rectangular patch, it is possible to maintain the performance by using patches of other shapes, and it is confirmed that by changing the feeder branch at various angles, it is possible to reduce the substrate size and contribute to diversity in the fabrication of the array antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1073-1077
• /
• 2010

This paper proposes a new 4-dimensional(4D) constellation-rotation(CR) method which obtains diversity gain of 4 under Rayleigh fading channels. The proposed scheme uses two consecutive CR operations for the constellation of QAM signals unlike a conventional 2-dimensional(2D) CR method using only one CR operation. The computer simulation results show that the new method outperforms the conventional one even more as both the channel code rate and the erasure ratio increase. In a point of system flexibility, the proposed scheme has a great advantage since the conventional 2D CR scheme can be simply implemented by only changing rotation angle values used in the proposed scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.81-86
• /
• 2004

Hybrid beamformer composed of Direction-of-Arrival (DOA) based scheme followed by Maximal Ratio Combining (MRC) is proposed to overcome the degradation due to inaccurate channel estimation caused by insufficient pilot power, which happens in conventional Single-Input Multiple-Output (SIMO) Code Division Multiple Access (CDMA) reverse link. The proposed scheme could provide more accurate channel estimation and interference reduction at the expense of diversity gam in the spatially correlated SIMO channel. As a result, hybrid scheme outperforms conventional MRC beamformer for six or more antennas in the channel environment, in which Angle-of-Spread (AOS) is within 30$^{\circ}$.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.42-49
• /
• 2008

This paper proposes a new beamforming algorithm to select beamforming gain or/and diversity gain in CDMA2000, W-CDMA, W-LAN channel according to signal environment on the multipath. In this paper, we present the criteria to obtain deversity gain at any point that based on quantized experimental value. Proposed method proposes represents a performance better than conventional algorithm adopting the largest two eigenvector when angle spread is exit. From the results of performance analysis through various simulation, it is confirmed that proposed method is far superior about $3{\sim}4$ times compare to conventional method in signal environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.295-296
• /
• 2006

We developed wire frame drive unit based on SMA for the 3D Shape display. Our basic concept is wire frame combination connected with a chain form which can create various shapes and it compared with pin array mechanism which is not able to display mushroom shape. It imitates antagonist mechanism of human musculoskeletal system. we create similar motion using repair-relaxation mechanism and locking mechanism by SMA. Therefore, in this paper, we propose SMA control solution for actuating repair-relaxation mechanism and locking mechanism. In our control system. we use optical sensor and quantitative angle between wire frames for closed loop control. And we supply amplified current for SMA by circuit composed of transistor and apply PWM signal to circuit for efficient control. So, wire frame drive unit enable diversity angle control based on sensor data. And then combination of wire frame drive units will create various objects.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4117-4135
• /
• 2020

Due to the angle of view, illumination and scene diversity, real-time dynamic face detection and recognition is no small difficulty in those unrestricted environments. In this study, we used the intrinsic correlation between detection and calibration, using a multi-task cascaded convolutional neural network(MTCNN) to improve the efficiency of face recognition, and the output of each core network is mapped in parallel to a compact Euclidean space, where distance represents the similarity of facial features, so that the target face can be identified as quickly as possible, without waiting for all network iteration calculations to complete the recognition results. And after the angle of the target face and the illumination change, the correlation between the recognition results can be well obtained. In the actual application scenario, we use a multi-camera real-time monitoring system to perform face matching and recognition using successive frames acquired from different angles. The effectiveness of the method was verified by several real-time monitoring experiments, and good results were obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1448-1458
• /
• 1997

In this paper the reverse link of the GLOBALSTAR-the representative CDMA LEO satellite system and LEO mobile satellite channel are developed by the SPW software simulation tool. And the performance of the system is evaluated. GLOBALSTAR is designed to give cellular-type service to hand-held user terminals through a constellation of 48 LEO satellites in circular orbites with 1414 Km altitude. Since LEO mobile satellite system communicates with mobile unit, it is suffered from severe multipath fading and shadowing. The fast mobility of LEO satellites makes the channel condition time vering. So, the LEO mobile satellite channel is different from land mobile channels. In this unique LEO satellite channel, it is shown that the performance of the GLOBALSTAR reverse link is varied according to the elevational angle, but this variation is overcome by satellite path diversity.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.44-52
• /
• 2015

A worst-case estimate of an envelope correlation coefficient (ECC) is obtained for small multiple-input multiple-output (MIMO) mobile antennas operating below 1 GHz. The worst-case estimate is numerically derived in this paper using spherical and exponential wave functions. The derived result confirms that the worst-case ECC can be easily obtained from the rotation angle between the radiation patterns of two MIMO elements, which are attained directly from the amplitude of 2D electric field patterns without any additional phase and polarization information. As a practical example, MIMO mobile antennas with different antenna element arrangements are compared to verify the validity of the proposed worst-case estimate. Moreover, based on these analyses, we also suggest an effective approach to reduce the ECC of a small MIMO mobile antenna operating below 1 GHz by properly locating the antenna elements to make the radiation patterns perpendicular to each other.