• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.351-363
• /
• 2022

Purpose: The objective of this research is to find manufacturing employment clusters of the disaster safety sector in South Korea. Method: The LISA(Local Indicator of Spatial Association) analysis method is applied to the employment data of 229 local governments categorized by the 2019 Korean Standard Industry Classification and Disaster Safety Industry Special Classification. The LISA method identifies the spatial dependency of employment and the spatial cluster of industries. Result: Three research findings are summarized. First, employment of the disaster safety industry in South Korea occupies about six percent of the total manufacturing industry. The annual proportion is in increasing trend. Second, the employment cluster of the disaster safety industry is located in the western side of the Seoul metropolitan region. Third, manufacturing businesses of industrial safety goods preventing industrial accidents are concentrated in regions of Busan, Ulsan, Changwon, Gyeongnam, and Gimhae, where heavy and chemical industries and industrial complexes are formed. Conclusion: Investment and promotion policies are suggested to the manufacturing employment clusters of the disaster safety industry for fostering these regions. Research results can be used to the better policies for industrial development and employment improvement of manufacturing clusters of the disaster safety industry in South Korea.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.111-116
• /
• 2022

The causes of motor burnout include overload, phase loss, restraint, interlayer short circuit, winding ground fault, instantaneous overvoltage, and the rotor contacting the stator, leading to insulation breakdown, leading to breakdown or electrical accidents. Therefore, equipment failure causes not only loss due to cost required for equipment maintenance/repair, but also huge economic loss due to productivity decrease due to process stop because the process itself including the motor is stopped. The current level of technology for diagnosing motor failures uses vibration, heat, and power analysis methods, but there is a limit to analyzing the problems only after a considerable amount of time has passed according to the failure. Therefore, in this paper, a device and algorithm for measuring insulation resistance using DC AMP signal was applied to an industrial motor to solve this problem. And by following the insulation resistance state value, we propose a diagnosis of deterioration and failure of the motor that cannot be solved by the existing method.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.356-367
• /
• 2021

With the recent development of IoT and artificial intelligence technology, research and applications for optimization of real-world problems by collecting and analyzing data in real-time have increased in various fields such as manufacturing and smart city. Representatively, the digital twin platform that supports real-time synchronization in both directions with the virtual world digitized from the real world has been drawing attention. In this paper, we define a digital twin concept and propose a digital twin platform prototype that links real objects and predicted results from the virtual world in real-time by utilizing the oneM2M-based IoT platform. In addition, we implement an application that can predict accidents from object collisions in advance with the prototype. By performing predefined test cases, we present that the proposed digital twin platform could predict the crane's motion in advance, detect the collision risk, perform optimal controls, and that it can be applied in the real environment.

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.134-139
• /
• 2021

Background: This study aimed to investigate the demographic characteristics of patients with knee pain caused by traffic accidents and test the effectiveness of Korean medicine (KM) treatment. Methods: The medical charts of 114 inpatients with knee pain caused by a traffic accident were reviewed from July 1, 2019 to October 31, 2019 at Bucheon Jaseng Hospital of KM. The patients' demographics including gender, age, period of hospitalization, and type of pharmacopuncture and herbal medicine prescribed were reviewed. The Numeric Rating Scale scores and Western Ontario and McMaster Universities Osteoarthritis Index scores were used to assess subjective knee pain. Results: There were more females (55%) than males in this study. Patients were more likely to be in their 30s (27.2%), be hospitalized for 11-14 days (41.2%), treated with Hwangryunhaedok pharmacopuncture (78.1%), and be prescribed Hwalhyeoljitong decoction (62.3%).The mean Numeric Rating Scale score for patients with knee pain caused by a traffic accident decreased significantly from 4.26 ± 1.39 to 2.53 ± 1.60 (p < 0.001), and the mean Western Ontario and McMaster Universities Osteoarthritis Index score also decreased significantly from 32.72 ± 18.36 to 23.40 ± 15.80 (p < 0.001) following KM treatment. Conclusion: As a result of analyzing 114 hospitalized patients with knee joint pain due to TAs, inpatients were more likely to be female (55%), a patient in their 30s (27.2%), and be a patient hospitalized for 11-14 days (41.2%). KM treatment of traumatic knee injury using pharmacopuncture therapy and herbal medicine can be an may be effective at reducing pain, and healing functional disorders of the knee.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.775-785
• /
• 2022

By analyzing the operation status of fire safety management of small construction site workers, deriving problems, and suggesting improvement measures, this study was conducted to present practical basic data for their efficient use in the future, and the following conclusions were drawn. First, it was analyzed that small construction site workers are elderly in the age group of construction workers, have short construction skills, most of the jobs are working in the construction industry, and the employment type is non-regular workers. Second, the fire safety management improvement plan of small construction site workers is systematized, fire safety manager is deployed to manage fire risk, fire escape routes and emergency warning facilities are provided to inform all workers at the construction site. In addition, measures to reduce industrial accidents are needed through realistic evacuation training, fire VR training, and interesting educational programs.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.123-130
• /
• 2022

In this paper is one of the measures to prevent concrete collapse accidents at construction sites in advance. Analyzed based on accumulated Meteorological Agency data. It is a reliable model that confirms the prediction of the decrease rate occurrence interval, and the verification items such as p_value is 0.5 or less and ecof appears in one direction through the SARIMA model, which is suitable for regular and clear time series data models, ensure reliability. Significant results were obtained. As a result of analyzing the temperature change by time zone and the water reduce ratio by section using the data secured based on such trust, the water reduce ratio is the highest in the 29-31 ℃ section from 12:00 to 13:00 from July to August. found to show. If a factor in the research result interval occurs using the research results, it is expected that the batch plant will produce Ready-mixed concrete that reflects the water reduce ratio at the time of designing the water-cement mixture, and prevent the decrease in concrete compressive strength due to the water reduce ratio.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.786-794
• /
• 2022

In construction sites, effective preventive safety management is required beyond post-processing safety management. Purpose: The purpose of this study is to present a model and analyze the relationship between safety management activities, safety culture key elements, safety, unsafe behavior management, and safety for autonomous and preventive safety management. Method: The relationship was analyzed by applying the survey data to the structural equation, and the path to safety outcomes from exogenous variables was explored and major issues were presented by interpreting the part suggested by the hypothesis verified by the analysis results. Result: As a result of analyzing the preliminary model and the path model, the appropriate model fit was confirmed, and the significant effect of exogenous variables on endogenous variables was confirmed. Conclusion: It is judged that it can contribute to continuously improving safety performance before safety accidents occur through safety management activities, safety and unsafe behavior management, and management of key elements of safety culture.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2628-2641
• /
• 2023

Nuclear safety is the lifeline for the development and application of nuclear energy. In severe accidents of pressurized water reactor (PWR), aerosols, as the main carrier of fission products, are suspended in the containment vessel, posing a potential threat of radioactive contamination caused by leakage into the environment. The gas-phase aerosols suspended in the containment will settle onto the wall or sump water through the natural deposition mechanism, thereby reducing atmospheric radioactivity. Aiming at the low accuracy of the aerosol model in the ISAA code, this paper improves the natural deposition model of aerosol in the containment. The aerosol dynamic shape factor was introduced to correct the natural deposition rate of non-spherical aerosols. Moreover, the gravity, Brownian diffusion, thermophoresis and diffusiophoresis deposition models were improved. In addition, ABCOVE, AHMED and LACE experiments were selected to validate and evaluate the improved ISAA code. According to the calculation results, the improved model can more accurately simulate the peak aerosol mass and respond to the influence of the containment pressure and temperature on the natural deposition rate of aerosols. At the same time, it can significantly improve the calculation accuracy of the residual mass of aerosols in the containment. The performance of improved ISAA can meet the requirements for analyzing the natural deposition behavior of aerosol in containment of advanced PWRs in severe accident. In the future, further optimization will be made to address the problems found in the current aerosol model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.119-125
• /
• 2010

Transportation system improved with rapid economic growth has helped human being a lot. However, the system has been also created social problems. The fast increasing auto ownership has not only increased transportation accidents but decreased air quality rapidly. One of the serious problems in transportation is that transportation policies have disregarded human factor, especially pedestrian environment. This research has developed microscopic pedestrian simulation with Netlogo. Netlogo is a very useful program for simulating complex systems such as pedestrian movements. The simulated pedestrian movements has been compared with actual surveyed pedestrian movements on a sidewalk. The comparison has been showed that the simulation program can be used for analyzing various pedestrian environments. Also, the impacts of bollard on the sidewalks have been analyed with the simulation program.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.303-311
• /
• 2010

There have been various forms of systems such as a digital speedometer or a black box etc. to meet the social requirement for reducing traffic accidents and safe driving. However that systems are based on after-accident vehicle data, there is limit to prevent the accident before. So in our previous research, by storing, analyzing the Vehicle-dynamic information coming from driver's behavior, we are developing the decision-device which could provide driver with Alerting-Information in real-time to enhance the driver's safety drive. but the performance valuation is not yet executed. Finally, this study developed positional recognition system by using the DGPS for pre-developed risky driving decision device. The result of test analyzed with the same that the aggregated vehicle dynamics data in DGPS and dangerous risky driving decision device. If the performance of risky driving decision device is verified by precisely positional recognition system, the risky driving management of vehicle would be effected.