• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.636-641
• /
• 2007

This research focuses on the development of an analytical model loosening mechanism of dental implant system. The model is utilized for predictions of preload values for internal and external types of implants. It identifies the effects of various parameters such as friction, geometric factors and mechanical properties on the loosening mechanism of the implant system. The results of analytical model are compared to those of the numerical method for validation.

• 소성∙가공
• /
• 제16권6호
• /
• pp.438-442
• /
• 2007

Sidewall curl is the curvature that results from non-uniform through-thickness strain present in the sheet stamping process which involves material flow over a die radius. In order to understand and control curl for tight fit-up tolerances, an analytical model that can provide a reliable measure for the amount of curl would be very helpful. In this study, a model is developed based on the moment-curvature relationship during bending-under-tension operations. For the verification of analytical model, sidewall curl is experimentally measured after deformation of a strip using a bending-under-tension test system. The results show a consistent relationship between the theoretically predicted value and the experimentally obtained one, especially in regions of high curl.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.65-70
• /
• 2000

An approximated analytical solution of mathematical model for the three phase fluidized bed bioreactor (TFBBR) was proposed using the linearization technique to describe oxygen utilization rate in wastewater treatment. The validation of the model was done in comparison with the experimental results. Satisfactory agreement was obtained in the comparison of approximated analytical solution and numerical solution in the oxygen concentration profile of a TFBBR. The approximated solutions for three modes of the liquid phase flow were compared. The proposed model was able to predict the biomass concentration, dissolved oxygen concentration the height of efficient column, and the removal efficiency.

• Steel and Composite Structures
• /
• 제4권2호
• /
• pp.113-132
• /
• 2004

Double skin composite element (DSCE) is a novel form of construction comprising two skins of profiled steel sheeting with an infill of concrete. DSCEs are thought to be applicable as shear or core walls in a building where they can resist in-plane loads. In this paper, the behaviour of DSCE subjected to combined bending and shear deformation is described. Small-scale model tests on DSCEs manufactured from micro-concrete and very thin sheeting were conducted to investigate the flexural and shear behaviour along with analytical analysis. The model tests provided information on the strength, stiffness, strain conditions and failure modes of DSCEs. Detailed development of analytical models for strength and stiffness and their performance validation by model tests are presented.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.775-791
• /
• 2015

An analytical and experimental investigation is performed into the mechanical behavior of carbon-fiber/epoxy woven coned annular disk springs. An analytical approach is presented for predicting the deformation behavior of disk springs of specially orthotropic laminates with arbitrary geometric parameters. In addition, an analytical methodology is proposed for obtaining the deformation behavior of a stack of disk springs. The methodology is capable of accounting for parallel and series arrangements for uniform and irregular stacks. Element and assembly experimental results are used to validate the proposed method showing how to achieve flexible spring rates at various deflections ranges. This manuscript also provides guidelines for design and validation of disk spring assemblies.

• 분석과학
• /
• 제26권2호
• /
• pp.154-163
• /
• 2013

국내 신규 제초제로 등록된 pyrimisulfan에 대해 농산물 중 잔류실태를 조사하기 위하여 LC-MS/MS를 이용한 시험법을 개발하였다. Pyrimisulfan 시험법의 회수율은 현미, 감자, 감귤, 고추에서 0.005 mg/kg 수준에서 88.7~99.3%이고 0.05 mg/kg수준에서 각각 90.1~94.2%였다. 회수율에 대한 모든 분석오차는 10% 미만으로 Codex 잔류물질 분석 가이드라인에 만족하였다.16 분석을 위한 기기 조건에서 pyrimisulfan의 정량한계는 0.005 mg/kg이었으며 0.01~1.0 mg/kg 범위에서 상관계수(R) 0.999 이상의 높은 직선성을 보여주었다. 따라서 본 연구에서 개발된 잔류농약 시험법은 농산물을 대상으로 효과적인 시료 전처리 방법과 최적의 정제 과정을 확립하여 다양한 농산물에 대한 잔류량 검출이 적당함을 확인할 수 있었다. 이와 같이 확립한 pyrimisulfan의 잔류시험법은 국제적 분석 기준을 만족할 뿐만 아니라 분석과정의 신뢰성 또한 확보할 수 있어서 본 잔류농약 시험법은 공정시험법으로 사용 될 것이다.

• 식품과학과 산업
• /
• 제55권1호
• /
• pp.23-32
• /
• 2022

제외국에는 지정되었지만 국내에는 아직 미지정된 식품첨가물의 종류가 많다. 전세계적으로 가공식품이 꾸준히 개발됨에 따라 새로운 유형의 가공식품의 등장이 증가하고 있으며, 국가별로 수출입에 관한 법률 규정이 상이하여 우리나라에서는 안전성 검정 및 사용량 제한이 되어있지 않은 식품첨가물을 이용한 새로운 가공식품이 국내 수입식품 중 혼입되어 유통될 수 있다. 이에 따라 국민의 안전한 먹거리를 보장하기 위한 지속적인 모니터링을 하기 위하여 미지정 식품첨가물의 분석법 개발이 필요하다. 본 고에서는 학계에서 진행된 분석법 개발과 검증에 대한 연구를 소개하였으며, 선행연구에서 제시된 분석법을 활용하여 분석법 개발을 진행하였다. 첫 번째 소개된 12가지 식품 착색료에 대한 동시분석법은 선행연구 분석법의 재현이 용이하였지만, 두 번째 소개된 유화제의 분석법은 일반적인 연구실에는 구비되지 않은 고가의 장비를 이용한 분석법에 대해 활용이 불가하고, 선행 연구된 간행물이 오래되어 재현이 어려운 문제점이 있었다. 가공식품 시장이 커지면서 식품첨가물이 신생되기도 하고, 까다로운 분석물질이 등장함에 따라 미지정 식품첨가물의 분석법 개발 연구는 중요하다. 따라서 이에 관련된 국가기관(식약처 등)과 산업계, 연구계, 학계에서는 미지정 식품첨가물의 분석법 개발에 대한 끊임없는 연구 진행이 필요하며, 본 연구 분야의 발전 가능성은 무궁무진할 것으로 사료된다.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.91-100
• /
• 2006

The purpose of this study was to validate alternative method by using non-carcinogenic, and less toxic solvents than NIOSH analytical method 5524 for measuring the airborne MWFs in workplaces. In laboratory tests, the ETM solvents(mixture of same volume for ethyl ether, toluene, and ethanol) were selected. The alternative method of analyzing MWFs, referred to as the ETM solvent extraction method, showed 0.04 mg/sample as LOD, and 0.15 mg/sample as LOQ. The analytical precision (pooled CV, coefficient of variation) of the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was 1.5%, 2.0%, 2.6%, 1.6%, respectively, which was similar to the precision (2.6%) of NIOSH analytical method (NIOSH 0500) for total dust. The analytical accuracy by recovery test, spiked mass calculated as extractable mass, was almost 100%. As the result of storage stability test, metalworking fluid samples should be stored in refrigerated condition, and be analyzed in two weeks after sampling. The 95% confidence limit of the estimated total standard error for the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was ${\pm}12.6%$, ${\pm}12.5%$, ${\pm}14.0%$, and ${\pm}13.6%$, respectively, which satisfied the OSHA sampling and analytical criteria.

• Toxicological Research
• /
• 제31권3호
• /
• pp.299-305
• /
• 2015

An HPLC analytical method was validated for the quantitative determination of biogenic amines in agricultural products. Four agricultural foods, including apple juice, Juk, corn oil and peanut butter, were selected as food matrices based on their water and fat contents (i.e., non-fatty liquid, non-fatty solid, fatty liquid and fatty solid, respectively). The precision, accuracy, recovery, limit of detection (LOD) and quantification (LOQ) were determined to test the validity of an HPLC procedure for the determination of biogenic amines, including tryptamine, ${\beta}$-phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine and spermine, in each matrix. The LODs and LOQs for the biogenic amines were within the range of 0.01~0.10 mg/kg and 0.02~0.31 mg/kg, respectively. The relative standard deviation (RSD) of intraday for biogenic amine concentrations ranged from 1.86 to 5.95%, whereas the RSD of interday ranged from 2.08 to 5.96%. Of the matrices spiked with biogenic amines, corn oil with tyramine and Juk with putrescine exhibited the least accuracy of 84.85% and recovery rate of 89.63%, respectively, at the lowest concentration (10 mg/kg). Therefore, the validation results fulfilled AOAC criteria and recommendations. Subsequently, the method was applied to the analysis of biogenic amines in fermented agricultural products for a total dietary survey in Korea. Although the results revealed that Korean traditional soy sauce and Doenjang contained relatively high levels of histamine, the amounts are of no concern if these fermented agricultural products serve as condiments.

• Mass Spectrometry Letters
• /
• 제10권1호
• /
• pp.38-42
• /
• 2019

Damaurone D belongs to the genus Rosa and is a traditional medicinal product used for the treatment of depression, inflammation, and infectious diseases. The purpose of this study was to develop a simple liquid chromatography-tandem mass spectrometry method for the detection of damaurone D in rat plasma and to demonstrate its application in pharmacokinetic studies. Damaurone D and berberine (internal standard) were extracted with acetonitrile using a protein precipitation method. Mass transition was monitored in multiple reaction monitoring mode at m/z $323.2{\rightarrow}267.0$ for damaurone D and m/z $336.1{\rightarrow}320.0$ for berberine in positive ion mode. Analytical validation was conducted by evaluating the specificity, linearity, accuracy, precision, matrix effect, extraction recovery, and stability. The calibration curves were linear over 2-1000 ng/mL. The intra- and inter-day precision and accuracy of quality control samples were 4.79-13.33% and 86.23-102.75%, respectively. The matrix effect and extraction recovery were 96.11-98.47% and 96.11-102.25%, respectively. In the pharmacokinetic study after intravenous administration of damaurone D at a dose of 3 mg/kg in rats, the area under the curve and clearance of damaurone D in rat plasma were $16750.26{\pm}2676.10min{\cdot}ng/mL$ and $182.44{\pm}31.36mL/min/kg$, respectively.