Bayraktar, Alemdar;Altunisik, Ahmet Can;Sevim, Baris;Turker, Temel
Smart Structures and Systems
/
제6권4호
/
pp.373-388
/
2010
The updated finite element model of K$\ddot{o}$m$\ddot{u}$rhan Highway Bridge on the Firat River located on the $51^{st}$ km of Elazi$\breve{g}$-Malatya highway is obtained by using analytical and experimental results. The 2D and 3D finite element model of the bridge is created by using SAP2000 structural analyses software, and the dynamic characteristics of the bridge are determined analytically. The experimental measurements are carried out by Operational Modal Analysis Method under traffic induced vibrations and the dynamic characteristics are obtained experimentally. The vibration data are gathered from the both box girder and the deck of the bridge, separately. Due to the expansion joint in the middle of the bridge, special measurement points are selected when experimental test setups constitute. Measurement duration, frequency span and effective mode number are determined by considering similar studies in literature. The Peak Picking method in the frequency domain is used in the modal identification. At the end of the study, analytical and experimental dynamic characteristic are compared with each other and the finite element model of the bridge is updated by changing some uncertain parameters such as material properties and boundary conditions. Maximum differences between the natural frequencies are reduced from 10% to 2%, and a good agreement is found between natural frequencies and mode shapes after model updating.
Altunisik, Ahmet Can;Bayraktar, Alemdar;Sevim, Baris;Kartal, Murat Emre;Adanur, Suleyman
Steel and Composite Structures
/
제10권6호
/
pp.541-561
/
2010
This paper presents finite element analyses, experimental measurements and finite element model updating of an arch type steel laboratory bridge model using semi-rigid connections. The laboratory bridge model is a single span and fixed base structure with a length of 6.1 m and width of 1.1m. The height of the bridge column is 0.85 m and the maximum arch height is 0.95 m. Firstly, a finite element model of the bridge is created in SAP2000 program and analytical dynamic characteristics such as natural frequencies and mode shapes are determined. Then, experimental measurements using ambient vibration tests are performed and dynamic characteristics (natural frequencies, mode shapes and damping ratios) are obtained. Ambient vibration tests are performed under natural excitations such as wind and small impact effects. The Enhanced Frequency Domain Decomposition method in the frequency domain and the Stochastic Subspace Identification method in the time domain are used to extract the dynamic characteristics. Then the finite element model of the bridge is updated using linear elastic rotational springs in the supports and structural element connections to minimize the differences between analytically and experimentally estimated dynamic characteristics. At the end of the study, maximum differences in the natural frequencies are reduced on average from 47% to 2.6%. It is seen that there is a good agreement between analytical and experimental results after finite element model updating. Also, connection percentages of the all structural elements to joints are determined depending on the rotational spring stiffness.
고-대역폭(High Bandwidth)의 헬리콥터 반응특성을 위한 높은 수준의 피드백 제어 게인의 사용은 로터 모드에 의해 항공기의 불안정성이 증가한다. 본 논문에서는 EC155B1 헬리콥터 모델링을 수행하고 이를 이용하여 롤 축의 각속도 및 자세 피드백 게인의 증가에 따른 항공기의 안정성을 분석하였다. 그리고 로터 플랩 모드에 의해 제한되는 롤 축 각속도 및 자세 피드백 제어 게인을 검토하였다. 또한 노이즈 제거 필터의 사용으로 비행 제어시스템의 위상지연이 증가 시 헬리콥터 안정성에 영향을 주는 피드백 제어 게인의 한계를 검토하였다.
본 연구에서는 미국 뉴욕주 로체스터시 소재 강합성 데크 트러스 보도교를 대상으로 사용성을 평가하기 위한 상시진동 실험(ambient vibration test)을 수행하였고 이를 해석적 방법에 의한 결과와 비교하였다. 교량전체에 대한 상시진동실험은 수치모델 작성 시 도입되는 여러 가정들에 대한 타당성을 평가하는데 있어서 유용한 방법이며, 교량의 고유진동수나 모드형상과 같이 구조 동력학에서 중요한 구조적인 변수를 결정하는데 있어 중요한 역할을 한다. 본 연구에서는 교량의 수직방향 및 수평방향 진동 특성과 변위를 측정하기 위하여 실제 교량에서 보행자에 의해 발생하는 진동을 입력하중으로 사용하였다. 교량 구조물에 대한 모델링을 위하여 3차원 유한 요소법을 사용하여 해석을 수행하였으며, 이를 통하여 현장실험 결과와의 유효성을 입증하였다.
Lee, Wonpyo;Song, Im-Sook;Han, Young Taek;Choi, Min-Koo
Mass Spectrometry Letters
/
제10권1호
/
pp.38-42
/
2019
Damaurone D belongs to the genus Rosa and is a traditional medicinal product used for the treatment of depression, inflammation, and infectious diseases. The purpose of this study was to develop a simple liquid chromatography-tandem mass spectrometry method for the detection of damaurone D in rat plasma and to demonstrate its application in pharmacokinetic studies. Damaurone D and berberine (internal standard) were extracted with acetonitrile using a protein precipitation method. Mass transition was monitored in multiple reaction monitoring mode at m/z $323.2{\rightarrow}267.0$ for damaurone D and m/z $336.1{\rightarrow}320.0$ for berberine in positive ion mode. Analytical validation was conducted by evaluating the specificity, linearity, accuracy, precision, matrix effect, extraction recovery, and stability. The calibration curves were linear over 2-1000 ng/mL. The intra- and inter-day precision and accuracy of quality control samples were 4.79-13.33% and 86.23-102.75%, respectively. The matrix effect and extraction recovery were 96.11-98.47% and 96.11-102.25%, respectively. In the pharmacokinetic study after intravenous administration of damaurone D at a dose of 3 mg/kg in rats, the area under the curve and clearance of damaurone D in rat plasma were $16750.26{\pm}2676.10min{\cdot}ng/mL$ and $182.44{\pm}31.36mL/min/kg$, respectively.
열 교환기/원자로의 과도한 진동을 방지 하려면 진동해석을 설계 단계에서 수행해야 한다. 진동 문제에서 고유 진동수의 정보는 열 교환기/원자로의 안전성을 평가하기 위하여 요구된다. 본 논문은 일단 지지보에 발생되는 고유치 문제를 해석하기 위하여 수치해석 방법인 Galerkin의 방법을 기술하였다. 일단 지지보는 자유단 끝점 또는 모드의 노드 포인트에 부가 질량과 스프링에 의하여 구속되어 있다. 수치해석으로 구한 고유진동수는 간단한 해석 방법과 간단한 테스트에 의하여 각각 구한 결과와 비교 되었다. Galerkin의 방법을 사용하여 논의된 일단 지지보의 고유 진동수를 구할 수 있음을 보였다. 부가 질량 증가함에 따라 고유 주파수는 감소하며 스프링 힘의 증가에 따라 고유 주파수는 상승함을 보였다. 무거운 부가 질량은 가연성 배관의 지지대 역할을 함을 보였다. 일단 지지보의 끝단에 설치된 부가 질량의 경우에 개발된 기존의 어림적 해석 방법으로도 일차 모두의 고유 진동수를 비교적 정확하게 구할 수 있음을 알 수 있었다.
WCDMA 시스템에서는 다른 주파수 또는 다른 시스템의 신호 세기를 측정하기 위하여 압축 모드(Compressed Mode)를 사용한다. 압축 모드로 동작하는 동안에는 처리 이득(Processing Gain)이 낮아지기 때문에 단말의 QoS(Quality of Service)에 영향을 끼친다. 그러므로 기지국은 단말이 요구하는 QoS를 만족시키기 위해서 전송 전력량을 증가시킨다. 한편 압축 모드의 전송 간격(Transmission Gap) 동안에는 내부 회로 전력 제어가 동작하지 않고 인터리빙(Interleaving)의 영향도 줄어들기 때문에 단말은 더 높은 Eb/No을 요구하게 된다. 따라서 시스템의 전체적인 성능 저하를 초래하게 된다. 성능에 미치는 영향 때문에, 압축 모드는 RNC(Radio Network Controller)에 의해서 다른 주파수 또는 다른 시스템의 신호 측정이 필요한 경우에만 동작하여야 한다. 그러나 3GPP는 압축 모드 동작을 결정할 수 있는 방법을 정의하지 않았다. 그러므로 성능 저하를 줄이기 위해서 압축 모드 동작을 결정할 수 있는 방법이 필요하다. 본 논문에서는 서비스 셀과 같은 주파수를 사용하는 인접 셀과 다른 주파수 또는 다른 시스템을 사용하는 인접 셀로 구성된 셀 환경에서 압축 모드가WCDMA 순방향 링크의 성능에 미치는 영향을 수식적으로 분석하고 압축 모드 사용에 따른 성능 저하를 줄이기 위하여 압축 모드가 필요하지 않은 단말의 압축모드 동작을 제한할 수 있는 단말 측정에 의한 압축 모드 방법을 제안한다. 수치적 분석 결과, 압축 모드를 사용할 때의 성능은 압축 모드를 사용하지 않을 때의 성능에 비해 급격하게 감소하는 것을 확인하였다. 그리고 제안하는 방법을 적용하였을 때, 압축 모드 사용에 따른 성능 감소를 크게 줄임을 확인하였다.
기계, 건축, 토목공학 분야 등에는 불균일 단면을 갖는 보 형태의 구조물들이 널리 사용되고 있다. 본 논문은 양단이 단순 지지된 보 구조물들의 동특성과 진동에 대한 문제를 다루며, 국부좌표를 사용한 지배방정식이 유도된다. 갤러킨의 모드합 방법으로 해가 가정되고, 고유진동수를 구하는 행렬식을 푸는 데는 이분법을 적용하였다. 유한요소법이 단지 기하학적 경계조건만을 만족시키는 허용함수를 사용하는 반면, 본 논문에서는 갤러킨의 모드합 방법을 적용하여, 지배방정식과 경계조건을 모두 만족하는 고유함수를 사용하였다. 계의 동특성을 알기위해, 네 종류의 불균일 단면을 갖는 단순 지지 보에 대해 모달 해석과 시험이 수행되었으며, 해석 결과는 실험 결과와 근사한 일치를 나타내었다.
Built-In-Test(이하: BIT)는 항공기 비행안전을 위해 반드시 필요한 기능으로 항공전자 장비의 경우 95% 이상의 높은 고장 진단능력을 요구하고 있다. BIT가 요구도에 명시된 고장 진단능력을 만족시키는지 확인하기 위해 BIT 성능분석이 필요하다. BIT 성능분석을 위해 FMECA (Failure Mode Effect Critical Analysis)에 기술된 고장모드를 활용하는 방법이 많이 사용되고 있으나, 본 논문에서는 분석 오류를 최소화할 수 있는 전자부품 기반의 BIT 성능분석 방법론을 소개한다. 또한, BIT 성능분석에서 제외될 수 있는 비행안전에 영향을 미치지 않는 전자부품 및 전자부품의 고장모드를 실제 개발사례에 적용하여 불필요한 BIT 기능 구현을 방지하고 정확한 BIT 성능분석을 수행할 수 있도록 하였다. BIT Demo를 수행하여 BIT 성능분석 결과와 실제 BIT 성능이 일치함을 확인하였다.
지반-구조물 상호작용 효과가 큰 경우의 동적문제를 모드중첩법으로 해결하기 위하여 여러 가지 등가모드감쇠값 결정 방법에 대한 이론적 배경을 검토하였다. 또한 component mode synthesis method에 의하여 감쇠행렬을 구하고 이를 이용한 직접적분법으로 지반-구조물의 연계모델의 응답을 계산하여 각 등가모드감쇠값 결정 방법으로 구한 등가모드감쇠값을 사용한 모드 중첩법의 해석 결과와 비교 분석하였다. 해석모델로는 2종류의 상부구조와 4종류의 지반조건을 고려하고 이를 조합한 경우를 채택하였다. 본 연구 결과로 소멸에너지법으로 얻은 등가모드감쇠값이 직접적 분법의 결과에 가장 근사적인 결과를 주는 것을 알 수 있었다. 고정지반모델인 경우에는 강도가중법을 제외한 다른 방법으로 구한 등가모드감쇠값은 직접적분법의 결과와 거의 일치되는 응답을 주었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.