• 한국콘텐츠학회논문지
• /
• 제12권3호
• /
• pp.434-441
• /
• 2012

축대칭 함몰지형 위를 통과하는 파의 변형에 관한 확장형 완경사 방정식의 해석해를 유도하였다. 함몰지형내의 수심은 함몰지형의 중심으로부터의 거리의 멱에 비례하여 변화된다. 지배방정식은 변수분리법을 이용하여 상미분방정식으로 변환되었으며 Hunt(1979)의 근사식을 이용하여 계수들을 파속과 군속도의 항으로 이뤄진 양함수의 형태로 나타냈다. 확장형 완경사 방정식의 바닥의 곡률과 경사의 제곱으로 이뤄진 항은 멱급수형태로 변환하였다. 마지막으로 Frobenius 급수를 사용하여 확장형 완경사 방정식의 해석해를 유도하였다. 유도된 해석해는 FEM으로 도출된 수치해와 기존의 완경사 방정식의 해석해와 비교하여 검증하였다.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1024-1029
• /
• 2017

A novel analytic solution has been derived for the bird-cage receiver coil of a magnetic resonance imaging (MRI) system, which is widely used in 3-dimensional medical imaging, by transforming the coil into an equivalent circuit model by using a transmission matrix-based circuit analysis. The bird-cage coil composed of N legs is divided into a cell for which input impedance is to be analyzed and the remaining N-1 cells, and then a transmission matrix corresponding to the N-1 cells is converted into a circuit to transform the 3-dimensional bird-cage coil into the 2-dimensional equivalent circuit model, which is suitable to derive the analytic solution for the input impedance. The proposed method derives directly the analytic solution for the input impedance at an arbitrary point of the coil unlike the conventional analytic solution of a bird-cage coil, so that it can be used not only for resonance frequency calculations but also for various coil characteristics analyses. Since the analytic solution agreed well with the results of computational simulations, it can be useful for the impedance matching of a coil and the analysis and the design of a multi-tune bird-cage coil.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.423-439
• /
• 2006

This paper proposes a hybrid analytic method for the prediction of vibrational and acoustic responses of reverberant system in the medium-to-high frequency ranges by using the PFA(Power Flow Analysis) algorithm and SEA(Statistical Energy Analysis) coupling concepts. The main part of this method is the application of the coupling loss factor(CLF) of SEA to the boundary condition of PFA in reverberant system. The hybrid method developed shows much more promising results than the conventional SEA and equivalent results to the classical PFA for various damping loss factors in a wide range of frequencies. Additionally, this paper presents applied results of hybrid power flow finite element method(hybrid PFFEM) by formulating the new joint element matrix with CLF to analyze the vibrational responses of built-up structures. Finally, the analytic results of coupled plate structures and an automobile-shaped structure using hybrid PFFEM were predicted successively.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.94-102
• /
• 1992

This paper presents the method of numerical analysis concerned with the hydropdynamic forces and moments of the floating bodies exerted by waves. The analytic methods of hydrodynamic wave forces and moments for large volume structures are generally classified into four categories ; the strip method, the boundary element method, the finite element method, and the potential matching method. In the case of the comparatively large structures, diffraction theory can be applied. However, there are no application limits of diffraction theory which have been known concerning with the analytic method of the rectangular structures. In this paper, the two-dimensional B.E.M. is treated for a moored small rectangular structure in order to evaluate applicability of diffraction theory. Numerical calculation is carried out for the structure. The results are compared with some other ones for verification. The result shows that diffraction theory is applicable to structures smaller than 0.15 in the ratio of the representative structure length d to wave length L for rectangular ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.84-87
• /
• 1999

This paper presents a preform design method that combines the analytic method and inference of known knowledge with neural network. The analytic method is a finite element method that is used to simulate backward extrusion with pre-defined process parameters. The multi-layer network and back-propagation algorithm are utilized to learn the training examples from the simulation results. The design procedures are utilized to learn the training examples from the simulation results. The design procedures are two methods the first the neural network infer the deformed shape from the pre-defined processes parameters. The other the network infer the processes parameters from deformed shape. Especially the latest method is very useful to design the preform From the desired feature it is possible to determine the processes parameters such as friction stroke and tooling geometry. The proposed method is useful for shop floor to decide the processes parameters and preform shapes for producing sound product.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권4호
• /
• pp.283-300
• /
• 2019

In this paper, we propose a new semi-analytic approach based on the generalized Taylor series for solving nonlinear differential equations of fractional order. Assuming the solution is expanded as the generalized Taylor series, the coefficients of the series can be computed by solving the corresponding recursive relation of the coefficients which is generated by the given problem. This method is called the generalized differential transform method(GDTM). In several literatures the standard GDTM was applied in each sub-domain to obtain an accurate approximation. As noticed in [19], however, a direct application of the GDTM in each sub-domain loses a term of memory which causes an inaccurate approximation. In this work, we derive a new recursive relation of the coefficients that reflects an effect of memory. Several illustrative examples are demonstrated to show the effectiveness of the proposed method. It is shown that the proposed method is robust and accurate for solving nonlinear differential equations of fractional order.

• 한국음향학회지
• /
• 제25권5호
• /
• pp.229-238
• /
• 2006

본 논문에서는 수치 영역의 포물선 지배 방정식의 근사 차수와 수치 영역 경계의 비국소적 경계 조건의 근사 차수가 서로 다를 때 음파 해에 미치는 영향을 해석적으로 보였다. 우선 평면파 분석법을 이용해 비국소적 경계 조건을 반 무한 매질 영역으로 변환했다. 그리고 실제 수치 영역과 반 무한 매질 영역의 경계에서 해석적 반사 오차를 유도했다. 지배 방정식과 비국소적 경계 조건의 해석적 오차가 간단한 대수 식으로 표현 가능한 경우에 대해서는 대수적인 오차식을 유도하고 그 경향을 고찰했다. 지배 방정식이 일반적인 고차 포물선 방정식일 때는 대수적인 오차 식은 보다 복잡하게 표현되며 수치적 방법을 이용해 그 특성을 고찰했다. 최종적으로 지배 방정식의 차수에 따른 비국소적 경계 조건의 정밀도를 유도하고 해석적 반사 오차의 전반적인 특성에 대해 논의했다. 본 연구의 핵심 공헌은 포물선 방정식과 비국소적 경계 조건의 근사 차수가 다를 때 해석적 오차 추정 방법과 사용한계를 제시했다는데 있다.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.417-424
• /
• 1983

This paper presents two methods of obtaining approximate analytic solutions for the temperature distributions and heat flow to two-dimensional transient heat conduction problems in a finite strip with constant thermal properties using the Heat Balance Integral. The methods introduced in this study are as follows; one using the Heat Balance Integral only, and the other successively using the Heat Balance Integral and an exact analytic method. Both methods are applicable to a large number of the two-dimensional unsteady conduction problems in finite regions such as extended surfaces with uniform thickness, but in this paper only solutions for the unsteady problems in a finite strip with boundary condition at the base expressed in terms of step function are provided as an illustration. Results obtained by both methods are compared with those by the exact two-dimensional transient analysis. It is found that both approximate methods generate small time solutions, which can not be obtained easily by any exact analytic method for small values of Fourier numbers. In the case of applying the successive use of the Heat Balance Integral and Laplace transforms, the analysis shows good agreement with the exact solutions for any Fourier number in the range of Biot numbers less than 0.5.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.731-739
• /
• 2018

This paper presents an optimal pattern for distributing stiffness along a framed tube structure through an analytic equation, which may be used during the preliminary design stage. Most studies in this field are computationally intensive and time consuming, while a hand-calculation method, as presented here, is a more suitable tool for sensitivity analyses and parametric studies. Approach in development of the analytic model is to minimize the mean compliance (external work) for a given volume of material. A variational statement of the problem is made, and a specified deformation-profile is obtained as the necessary condition for a minimum; enforcing this condition, stiffness is then computed. Due to some near-zero values for stiffness, the problem is modified by considering a lower bound constraint. To deal with this constraint, the design domain is assumed to be divided into two zones of constant stiffness and constant curvature; and the problem is restated in terms of these concepts. It will be shown that this methodology allows for easy computation of stiffness through an analytic and dimensionless equation, valid in any system of units. To show practicality of the proposed method, a tubed-system structure with uniform stiffness distribution is redesigned using the proposed model. Comparative analyses of the results reveal that in addition to simplicity of the proposed method, it provides a rather high degree of accuracy for real-world problems.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.1030-1038
• /
• 2008

교통량조사 방법은 루프검지기와 피에조센서를 주로 많이 사용하여 차량의 숫자만을 파악하여 교통주기를 계산하는 방법을 사용하나 교통량을 파악하는 방법은 단순한 교통량에만 국한되는 것이 아니라 다중교통특성인 진입로의 길이, 도로의 폭, 보행자의 수, 통과차량수, 지체차량수 등 관련되는 교통대안을 총 망라하여 새로운 교통량인 혼잡도라는 개념을 대표대안으로 선정하면 바로 교통주기에 적용할 수 있다. 본 논문에서는 서로 관련성이 없는 교통대안들을 AHP 방법을 사용하여 교통주기 계산에 즉시 사용할 수 있는 공통 분모인 새로운 교통대안을 찾아내는 알고리즘을 개발하고 이를 새로운 교통량 개념인 혼잡도라는 교통량을 찾아내는 퍼지센서 알고리즘을 구성하는데 적용한다. 시뮬레이션을 통해 타 교통제어방법과 비교하여 지체차량시간이 줄어듬을 보여준다.