• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.67-75
• /
• 2009

In this study, the investigation of hydraulic characteristics and the pier data for the rivers in Youngseo area of Gangwon Province was carried out and the evaluation and comparison between the values from existing formulas and the values from the model tests was conducted, along with the statistical sensitivity analysis of the elements influencing the scour. As a result, the deviation between the values calculated from the existing formulas and the model tests appeared to be 1.09%~63.98% as the piers were getting larger, which indicated that the existing formulas were not appropriate to estimate the scour in the rivers in Gangwon area. And the formula which estimates the scour with the size of the pier only, among the existing ones, was far behind in estimating the sensitivity because of insufficient incorporation of the hydraulic characteristics, though it is convenient to estimate the value. The sensitivity analysis of the value from the model tests and the depth of the scour proved the significant impact on scour by the size of the pier and water depth, indicating 64% and 36%, respectively. In this study, the formula developed through the regression analysis performed based on the values from the model tests, which appeared to be appropriate for the rivers in Gangwon Province, was proposed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2409-2420
• /
• 1996

This paper describes the development of a general program for the design and part load performance analysis of single-shaft-heavy-duty gas turbines. Efforts are made to fully represent the real component features by the characteristic models and special emphasis is put on the modeling of cooled turbine stages. The design analysis routine is applied to simulate the performance of current gas turbines and its appropriateness for system analysis is validated. Meanwhile, the component parameters of real engines which describe the technology level are obtained. The program is extended to predicting the part load operation of gas turbines with the aid of models for the off-design characteristics of compressor, turbine and other main components. Part load simulation can be carried out only with limited numbers of input data. It is demonstrated that the program accurately estimates the part load characteristics of real turbines.

• The Journal of Korean Association of Computer Education
• /
• v.21 no.6
• /
• pp.93-103
• /
• 2018

The purpose of this study is to measure teachers' beliefs to teach software education effectively. Based on the revised version of the STEBI-B questionnaire, factors influencing the software education were added through the literature review and composed of sub-factors of the category of personal software education teaching efficacy and software education outcome expectancy. And then, 146 in-service elementary school teachers were surveyed preliminary 35 questions. The collected data were analyzed by factor analysis and reliability analysis, and 5 items were deleted to complete the final item. A factor analysis and reliability analysis of the final 30 questions were conducted to demonstrate the appropriateness of the item composition, and software education teaching efficacy belief instrument(SE-TEBI) was developed.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1161-1170
• /
• 2021

The MOBA game is updated every year with a new season, the new season update brings fun to the game users and also makes them feel unfamiliar with the new gameplay. In order to let game users better adapt to the new season, this study will extract the new season balance evaluation factors. Firstly, we used one-on-one review to collect the unbalanced factors that game users had encountered at the beginning of the new season of the MOBA game, and secondly, we organized the collected review data into a questionnaire and conducted a survey. The first step of the experiment was to filter out the lower factors through exploratory factor analysis and extract the balance evaluation factors of the MOBA game new season. The second step of the experiment was to examine the correlation between the factors through confirmatory factor analysis, as well as to confirm the appropriateness and explanatory value of the factors. The analysis resulted in "Game character experience", "Game view's expression", "Game level", and "Composition of the game setting" are the four factors. Finally, through correlation analysis, the most relevant factor for game satisfaction is the "Game character experience", and each factor is correlated with each other.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.3
• /
• pp.165-171
• /
• 2000

This paper proposes a technique to design of air-core type Linear DC Motor(LDM) by using Equivalent Magnetizing Current(EMC) method and has performed its dynamic analysis. The magnetic flux density differ in accordance with airgap position due to difference of mechanical and magnetic air gap length and the coil shape has an influence on the thrust. Therefore, the analysis of magnetic field due to the magnets is carried out by EMC. The phenomena according to the various coil various coil shape under the same Magneto Motive Force(MMF) has been analyzed and its result is applied to the design process. The appropriateness of the proposed technique is confirmed by Finite Element Method(FEM) and its dynamic analysis is carried out from the coupling of the electrical circuit equation and mechanical kinetic equation.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.637-644
• /
• 2011

Objective & Background: When applying various evaluation tools that analyze work posture risk through observation, accurate measurement of body flexion angle is very important. Method: This study investigated differences and appropriateness of 5 different existing reference points commonly used in the analysis of the work posture. Twenty five ergonomist and trained professionals were participated in this study. A Same flexion angle was utilized for the evaluation of risk assessment of musculoskeletal disorders using five different reference points to investigate the degree of difference between them. To investigate how different the observers' preferred flexion angle measuring methods were compared to the ISO 11226 Reference Posture, a virtual body model was constructed using the Poser 6.0 program. Six types of body flexion postures were constructed, and since neck flexion differs according to body angle, five types of neck flexion postures were constructed with the trunk bending $20^{\circ}$ forward, making up a total of 30 virtual flexion postures. Results: Results showed that the observers used personally preferred reference points instead of reference points recommend in the evaluation tools. Also the results revealed the their seems to be 6 types of flexion angle for the trunk and 11 types of measurement methods for the neck flexion angle in the form of personally preferred reference points. The results showed that a mean difference of $14^{\circ}$($4{\sim}23^{\circ}$) occurred in the trunk, and a mean difference of $20^{\circ}$($-8{\sim}51^{\circ}$) occurred in the neck. To increase accuracy when using the 5 evaluation tools in combination, the ISO 11226 standards, observers' preferred flexion posture standards, and common flexion posture standards of the evaluation tools were compared with the reference points of the 5 evaluation tools. Results showed considerable variance in angle difference for each evaluation tool. Conclusion: According to the results of this study, considering the angle difference between the flexion angle reference points of the evaluation tool and the reference points selected by the observers, it is concluded that instead of personally preferred reference points, the standardized reference points to enhance the accuracy and the objectivity. Application: The result of this study can be used as reference guide to develop the standardized reference point in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.9
• /
• pp.447-454
• /
• 2017

In this study, local velocity distribution of cooling air in a heat exchanger used in an air compressor for a railway car was measured and heat transfer characteristics of the heat exchanger were analyzed. First, heat transfer coefficient and fin performance of the cooling air side were predicted and was checked if the fin of the heat exchanger was effectively used. Distribution of air flow rate at high temperature side was predicted through pipe network analysis and heat resistance at high temperature and low temperature side were predicted and compared. Spatial distribution of temperature in the interior and surface of the square channel constituting high-temperature side was predicted and appropriateness of the size of the heat exchanger was examined. As a result of the analysis, the present size of the heat exchanger could be reduced and it could be effective to promote heat transfer inside the heat exchanger rather than outside to improve performance of the heat exchanger.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.663-668
• /
• 2005

The present study proposed to examine the appropriateness of the ground water level condition that had a significant effect on the stability of the slopes and, for this purpose, analyzed the rise of ground water level during the rainy season by applying the average daily rainfall of Seoul for the last 30 years. The result showed that the rise of ground water level was 6.0$\sim$41.0% of the slope height, which suggests that the currently applied condition of ground water level is somewhat overestimated. In addition, the result of interpreting the stability of slopes during the rainy season, slopes were unstable in all conditions when the ground water level was at the ground surface and base failure occurred. This suggests the importance of ground water level condition in stability analysis.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.2
• /
• pp.195-213
• /
• 2005

Objectives: This study aims to determine fostering stress and mental health state that mothers of handicapped children perceive as primary care givers and to analyze their demand for information assistance in order to release their stress so that it can provide materials that contribute to establishment of assistance system for families with handicapped children. Methods: The research subjects were 340 mothers whose children went to a nursery for special children, 3 general nurseries and 6 special schools in Daegu, and the data were collected using structures questionnaires. The survey analyzed mothers' fostering stress, their demand for fostering information assistance, children's daily activity abilities. Component concepts of each scale was validated by adopting confirmatory factor analysis, and factors affecting demand for fostering information assistance were analyzed by adopting covariance structural analysis. Results: Younger mothers tend to have higher demand for information, and mothers with younger children or children with double handicaps also have higher demand. Mothers under 30 have the lowest demand for public health and medical care assistance and for home and community life assistance, while mothers with children with physical handicaps have the highest. The validity of component concepts was verified by categorizing as cognitive structure models fostering stress, information demand, children's daily activity abilities, and their appropriateness was evaluated through confirmatory factor analysis using structural equation modelling. And then, GFI (more than 0.9), CFI (more than 0.9), TLI (more than 0.9) and RMSAE (less than 0.08) were used to evaluate the appropriateness. It was found that all the component concepts are valid, as every item is within appropriate range. The result of analyzing information demand demonstrated that children's handicap levels significantly affect their mothers' mental health, while fostering stress significantly affect mothers' metal health, information demand. As well, it was confirmed that mothers' mental health has a significant effect on information demand. Conclusions: Therefore, to reduce special children's mothers' uncertainty, helplessness and fostering burden, it is necessary to provide them with information on children's challenges, development and fostering and to offer them quality public health, medical care and welfare assistance along with family and local community life assistance.

• Journal of the Korean Home Economics Association
• /
• v.37 no.10
• /
• pp.123-133
• /
• 1999

The purpose of the study was to develop the parenting style scale which is reflecting cultural background of Korean parent's parenting for their children. The instalment was designed based on the literature reviews and on the Baumrind's parenting style. A total of three hundred and sixty two mothers whose children from first and second grade in elementary school completed the Questionnaires. The questionnaires consisted with the items addressing different types of parenting style which include love and care, encouragement of independence, enjoyment in parenting, communication, control, control of aggressiveness, strategies of control , request of maturity. Factor of analysis was applied to examine validity of Korean parenting style scale. Based on the factor analysis, 33 items selected for final questionnaire and two factors discovered. The first factor which named 'warmth'included 20 items such as love and care toward their children, communication, enjoyment in parenting, encouragement toward independency. The second factor which named'control'included 13 items such as control of children's behavior and discipline of children. Warmth factor accounted for 46% of variance and control factor accounted for 18% of variance. Internal consistency was also checked. Although warmth and control factor represented a moderate internal consistency, control factor showed lower correlations then warmth factor. The reliability estimates (Cronbach alpha) were. 87 and 71 for warmth and control factor respectively. Korean parenting style scale can be used to address the appropriateness of Baumrind's theoretical assumptions in parenting style as well as to examine parenting style for Korean population. However, this instalment was developed with Korean mothers only. Further analysis need to be addressed with fathers.