• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.377-388
• /
• 2014

There have been a lot of studies about overseas factory location in order to meet various needs of industries according to the international economic developments. However, most of the studies were written about generic theory for general industries or mainly concerned to high capital industries. This study is focusing on the sewing and apparel industries which represent labor intensive and small-medium type of enterprises. For this study, AHP(Analytic Hierarchy Process) methods were applied to make proper analysis after wide range of survey to clarify determinants which provide a guidance for overseas factory location. As a result of the analytical researches done in the thesis the most important which should be taken consideration while determining of overseas factory location for sewing and apparel products industry are as follows - economic factors(0.569), geographic factors(0.171), social and cultural factors(0.157), regulations and institutional factors(0.103). In the last, S company is examined for example to show how this determinants have practically been applied.

• 연구논문집
• /
• s.26
• /
• pp.25-32
• /
• 1996

Water seals are used in a washing machine to seal rotating shafts and to prevent the penetration of dust, dirt or water from the outside. The design parameters of water seals, that were the location of the garter spring, the angle of the seal lip, and the interference, were investigated by the computer simulations using the hyperelastic non-linear large deformation finite element analysis code. The maximum contact stress and the distribution of stress on the seal lip were obtained for various type of water seals. The best type among the several investigated seals was selected considering the contact force and the sealing performance.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.312-314
• /
• 2002

송전선로에 고장발생시 해당선로에 취부된 디지털 보호계전기의 보조기능인 거리표정의 신뢰도를 확인하기 위하여 보호계전기 제작사, 고장종류, 계전기 TYPE별로 거리 표정결과와 실제 고장점과의 오차 등에 대하여 세부적으로 통계 분석을 실시 하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1442-1449
• /
• 2016

This paper proposes a diagnosis to detecting poor contact fault and fault location. Electrical fire by poor contact fault of power cable occupied a large proportion in the total electrical installations. The proposed method has an object to prevent electrical fault in advance. But detecting poor contact fault is difficult to detect fault type and fault location by using conventional reflectometry due to faults generated intermittently and repeatedly on the time change. Therefore, in this paper poor contact fault and fault conditions were defined. System generating poor contact fault produced for the experimental setup. SSTDR and algorithm of reference signal elimination heighten performance detecting poor contact fault on live power cable. The diagnosis methods of signal process and analysis of reflected signal was proposed for detecting poor contact fault and fault location. The poor contact fault and location had been detected through proposed diagnosis methods. The fault location and error rate of detection were verified detecting accuracy by experiment results.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.249-267
• /
• 1995

The purpose of this study is to analyze breast shape by age, to classify breast types and then to suggest brassiere size chart. The subject of anthropometric measurement were 232 women in 20's and 40's. The direct anthropmetric measurement were analyzed by mean, standard deviation, duncan test, T-test, ANOVA, factor & cluster analysis The results are as follows; 1) as a result of analysis for the measurements, according to the increase of age, the items of height were decreased and the items of width, depth, cir- cumference, length were increased, being obesity and breast points were dropped. So the volume and bottom area of 40's women's breast were lager than 20's women's. The width of breast points was bide by increasing of intereior. 2) as a result of factor analyxis, 5 factors were extracted as important factor of breast shapes(obesity of breast and location of breast point, breast height and volume, upper dimensions of breast/lower dimensions of breast, interior dimensions of breast/exterior dimensions of breast, volume of the lower part and drop of breast) 3) as a reslut of cluster analysis, the breast shape were classified into 4 types. namely, typel has the smallest volume, bottom area of breast and the slenderest breast, type2 was the second obesity type. type3 was middle sized type. type4 has much dropped, wide bottom area of breast and the biggest form. 4) To establish brassiere sizing system, the loss funtion was used to decide interval of under bust girth and cup size of size chart. 20 brassiere sizes were established and the size chart covers 92.2% of all subject.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2012

This study used GIS method for the characteristic analysis of farmstead location in study area. The present study surveyed the coordinates of location for 76 livestock farmsteads with big size in rural areas within city of Cheonan. Based on the surveyed data, this study analyzed the spatial characteristics of location for the farmsteads by using both new evaluation criteria and their corresponding GIS (geographic information system) layers developed in this research. The criteria consist of six factors, which are 2 geographic factors for slope(SLO) and aspect(ASP) of earth surface, 3 accessability factors for distance from water area(DWA), road(DRO), and built-up area(DBA), including type of landuse(TLA). In the analysis results of six criteria using the grid funcations of GIS, the highest distributed ratios of the farmsteads per criterion were found at the lower slope area less then 2% in SLO, the area with south and south-east direction in ASP, the area with distance between 500m and 1,000m in both DWA and DRO, the area within 500m in DWA, and the paddy and upland area in TLA. As new finding of this study, these analysis results seemed that the farmsteads have been located at the better places with the priority to build and manage conveniently and economically.

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.145-146
• /
• 2009

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1563-1569
• /
• 2000

Objective : Delayed ischemic neurologic deficit(DIND) is one of the major complications following aneurysmal subarachnoid hemorrhage(SAH). However, the correlation between angiographic vasospasm(AV) and DIND after SAH is not precisely known. The authors investigated the timing, incidence, characteristics of DIND, and analyzed correlation between AV and DIND. Patients and Methods : A series of 126 patients with SAH and performed cerebral angiography which, confirmed anterior circulation aneurysm, admitted to between January 1996 to December 1998, were studied retrospectively. A comparative analysis between group 1(G1) in which AV patients presented with DIND, and group 2(G2) patients did not DIND, were done. AV was graded according to location, distribution and degree. Location of vasospasm was classified as basal type(BT), distal type(DT). BT was involved horizontally and include the bilateral carotid systems, proximal middle cerebral artery(MCA) and proximal anterior cerebral artery(ACA). DT was involved vertically and include the MCA branches as they become vertically or posteriorly oriented and the ACA distal to the anterior communicating artery. BT and DT all defined ether as localized type(LT) or combined type(CT). Distribution of vasospasm was classified as type I, type II and type III. Type I represents the involvement of bilateral carotid systems and bilateral anterior cerebral artery, type II was designed as one carotid system without involving anterior cerebral artery, and type III when only some portions of the anterior cerebral artery were involved, bilaterally. Degree of vasospasm was classified as mild(less than 25%), moderate(between 25-50%), severe(greater than 50%), and those were determined by comparing the caliber of the artery in vasospasm to that of the nearest area of apparently normal vessel. Results : The incidence of AV & DIND was 57/126(45.2%), 29/126(23.0%), and timing of DIND was 9 days(${\pm}4.1$) after initial hemorrhage. As for the location, BT was seen in 12 cases(40.0%), DT 11 cases(36.7%) and CT 7 cases (23.3%), respectively. Where as G1, BT was seen 5 cases(18.5%), DT 5 cases(18.5%) and CT 17 cases(63.0%), respectively in G2. CT AV was more correlated with DIND than LT AV(p<0.05). For distribution, type I was seen in 16 cases(59.2%), type II 4 cases(14.8%), type III 7 cases(25.9%) in G1 where as type I was seen in 7 cases(23.3%), type II 10 cases(33.3%), type III 13(43.3%) in G2. Type I AV was well correlated with DIND unlike to type II or type III(p<0.05). As for the degree, mild was seen in 4 cases(14.8%), moderate 14 cases(51.9%), severe 9 cases (33.3%) in G1, and mild 16 cases(18.5%), moderate 11 cases(36.7%) and severe 3 cases(10.0%) in G2. Moderate to severe type AV was well correlated with DIND(p<0.05). Conclusion : These results indicate that it may be possible to predict DIND according to careful analysis of location, distribution, degree of AV in patients with aneurysmal SAH.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2006

This paper presents a new numerical algorithm for fault location estimation and for faults recognition based on the synchronized phasors. The proposed algorithm is based on the synchronized phasor measured from the synchronized PMUs installed at two-terminals of the transmission lines. In order to discriminate the fault type, the arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent or transient. The results of the proposed algorithm testing through computer simulation are given.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.5.1-5.7
• /
• 2013

Objectives Despite increasing availability of global positioning system (GPS), no research has been conducted to analyze GPS data for exposure opportunities associated with time at indoor and outdoor microenvironments. We developed location-based and time-weighted spatial measures that incorporate indoor and outdoor time-location data collected by GPS. Methods Time-location data were drawn from 38 female subjects in California who wore a GPS device for seven days. Ambient standard deviational ellipse was determined based on outdoor locations and time duration, while indoor time weighted standard deviational ellipse (SDE) was developed to incorporate indoor and outdoor times and locations data into the ellipse measure. Results Our findings indicated that there was considerable difference in the sizes of exposure potential measures when indoor time was taken into consideration, and that they were associated with day type (weekday/weekend) and employment status. Conclusions This study provides evidence that time-location weighted measure may provide better accuracy in assessing exposure opportunities at different microenvironments. The use of GPS likely improves the geographical details and accuracy of time-location data, and further development of such location-time weighted spatial measure is encouraged.