• 전기학회논문지
• /
• 제63권12호
• /
• pp.1716-1721
• /
• 2014

In this paper, a study on automation method for the circuit/EM (Electro-Magnetic) simulation is carried out to analyze effectively the SI/PI (Signal Integrity/Power Integrity) issues which occur on circuits and/or PCBs (Printed Circuit Boards). For the automation of the circuit/EM simulation, algorithms performing each process of the SI/PI analysis automatically (such as ports setup, circuit definition and SI/PI evaluation) are developed; thereby automation system for the SI/PI analysis is constructed with the algorithms. The automation of the circuit/EM simulation is accomplished in the environment of the C/S (Client/Server) architecture in order to reduce resources such as high cost computers demanded for the SI/PI analysis. The automation method for the SI/PI analyses proposed in this paper reduces effort, time, and cost spent on the environment setup for simulation and the SI/PI analysis process. In addition, the proposed method includes automation of the documenting process, which organizes, records and displays the SI/PI analysis results automatically for users.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.293-294
• /
• 2021

For the successful introduction of the construction automation system, it is necessary to define the consideration factors and target tasks for the necessity of automating the conventional methods. In this study, the factors for automation were derived through brainstorming and questionnaires, and calculated the relative importance through the pairwise comparison using the AHP analysis method. In addition, the detailed type of concrete work was classified into 32 detailed works, and the automation score for each work was calculated by investigating the factors considering the necessity of automation. As a result of the automation score analysis, it was concluded that the need for automation of concrete placing work was the highest. Based on this study, we will consider the strategy of a concrete construction automation system.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.252-262
• /
• 1993

The subject on office automation is gradually gaining more improtance due to the fact that the efficiency of office systems contribute to the increase of productivity as much as manufactoring systems themselves. For successful implementation of office automation, one must carefully plan and execute various steps such as the analysis of office tasks, personnel training, workplace design, equipment design, and so on. The previous studies related to the subject has not been concrete enough to be practically helpful for the actual realization of office automation. In this paper, a new analysis method of the office task is proposed. This analysis method is based on the Rasmussen's and Bennette's methods. The Rasmussen's method describes a way of quantifying mental workload while the Bennette's method provides a tool for the analysis of the office task. The posner's and Rouse's methods are also employed for the detailed division of tasks. The method proposed in this paper is believed to be easier for use and expected to be more helpful for us to cope with the clear definition of office tasks that is vital to successful implementation of office automation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.191-192
• /
• 2019

The construction industry is in the process of changing from the existing labor-intensive production system to a construction automation system using advanced information and communication technologies. Accordingly, in order to identify key research areas and utilization technologies in the field of construction automation, this study collected the latest 17 years (2000-2016) of papers published in International Symposium on Automation and Robotics in Construction (ISARC) and conducted a correlation analysis between the construction management areas and automation technologies based on the keyword frequency. As a result, the BIM, WSN, and Augmented reality were extracted as the technology keywords with high correlation with various areas of construction management.

• Journal of Astronomy and Space Sciences
• /
• 제26권2호
• /
• pp.267-278
• /
• 2009

Automation of the key flight dynamics operations for the geostationary orbit satellite mission is analyzed and designed. The automation includes satellite orbit determination, orbit prediction, event prediction, and fuel accounting. An object-oriented analysis and design methodology is used for design of the automation system. Automation scenarios are investigated first and then the scenarios are allocated to use cases. Sequences of the use cases are diagramed. Then software components and graphical user interfaces are designed for automation. The automation will be applied to the Communication, Ocean, and Meteorology Satellite (COMS) flight dynamics system for daily routine operations.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.746-756
• /
• 2018

Harmonic resonance exists in grid-connected inverter systems. In order to determine the network components that contribute to harmonic resonance and the composition of the resonant circuit, sensitivity theory is applied to the resonance characteristic analysis. Based on the modal analysis, the theory of sensitivity is applied to derive a formula for determining the sensitivities of each network component parameter under a resonance circumstance that reflects the participation of the network component. The solving formula is derived for both parallel harmonic resonance and series harmonic resonance. This formula is adopted to a 4-node grid-connected test system. The analysis results reveal that for a certain frequency, the participation of parallel resonance and series resonance are not the same. Finally, experimental results demonstrate that the solving formula for sensitivity is feasible for grid-connected systems.

• 정보관리연구
• /
• 제37권4호
• /
• pp.1-23
• /
• 2006

본 연구의 목적은 국내 사립대학도서관 자동화 발전과정을 다각적인 측면에서 분석하고 체계적으로 기술함으로써 도서관자동화 분야의 역사를 정립하고, 발전과정에서 나타난 문제점을 분석하는 데 있다. 연구방법은 문헌조사와 대학 홈페이지 방문조사, 전화인터뷰를 병용하였다. 대학도서관 발전과정을 선행연구자들의 사례와 대학도서관 자동화 현황 분석을 통하여 핵심이 되는 특징을 도출하여 '도입기', '성장기', '안정기', '도약기'로 구분하였다. 이를 위해 일차적으로 대학도서관 자동화 현황 분석을 문헌조사로 하였으며 자료분석의 표본은 국내 사립대학 109개 도서관을 대상으로 하였다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.185-194
• /
• 2018

Interaction among multiple grid-connected inverters has a negative impact on the stable operations and power quality of a power grid. The interrelated influences of inverter inductor-capacitor-inductor filters constitute a high-order power network, and consequently, excite complex resonances at various frequencies. This study first establishes a micro-grid admittance matrix, in which inverters use deadbeat control. Multiple resonances can then be evaluated via modal analysis. For the active damping method applied to deadbeat control, the sampling frequency and the stable domain of the virtual damping ratio are also presented by analyzing system stability in the discrete domain. Simulation and experimental results confirm the efficiency of modal analysis and stable domain calculation in multi-inverter grid-connected systems.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.771-784
• /
• 2020

Reliability analysis techniques combining with various surrogate models have attracted increasing attention because of their accuracy and great efficiency. However, they primarily focus on the structures with continuous response, while very rare researches on the reliability analysis for structures with discontinuous response are carried out. Furthermore, existing adaptive reliability analysis methods based on importance sampling (IS) still have some intractable defects when dealing with small failure probability, and there is no related research on reliability analysis for structures involving discontinuous response and small failure probability. Therefore, this paper proposes a novel reliability analysis method called AGPC-IS for such structures, which combines adaptive Gaussian process classification (GPC) and adaptive-kernel-density-estimation-based IS. In AGPC-IS, an efficient adaptive strategy for design of experiments (DoE), taking into consideration the classification uncertainty, the sampling uniformity and the regional classification accuracy improvement, is developed with the purpose of improving the accuracy of Gaussian process classifier. The adaptive kernel density estimation is introduced for constructing the quasi-optimal density function of IS. In addition, a novel and more precise stopping criterion is also developed from the perspective of the stability of failure probability estimation. The efficiency, superiority and practicability of AGPC-IS are verified by three examples.

• Journal of Information Technology Applications and Management
• /
• 제27권6호
• /
• pp.101-116
• /
• 2020

This study attempts to derive critical success factors and prioritize activities for implementing the automation of software test. Software testing proceeds in five steps of test plan, test case design, test scripting & test environment setup, test execution & evaluation, and test closure. From the literature, twenty influence factors in the five steps were identified. Focus Group Interviews with ten experts in software testing selected fourteen factors on the basis of importance and feasibility. Some factors were further divided to clarify their meanings and the number of influence factors finally became twenty one. A survey on the influence factors was conducted with 75 IT professionals. An importance-feasibility analysis was applied to the survey responses and classified the influence factors into four groups of essential factors, critical factors, low priority factors, and minimal factors. Essential factors include objectives for test automation, strategies for test automation, test automation training, test automation education, setting up test automation environment, setting up test environment, test automation tool selection. Critical factors include management's continued support, management's continued interest, role of automation engineers, and skills of automation engineers. This result suggests that a lot of efforts should be put into SW test plan for the successful SW test automation and SW automation should proceed in consideration with the priorities and resource consumption.