• 응용통계연구
• /
• 제28권2호
• /
• pp.251-267
• /
• 2015

인도부페 프로세스는 유한개의 행과 무한개의 열로 이루어진 이진행렬의 분포와 관련된 확률과정이다. 무한특성모형을 유한개의 행과 무한개의 열로 이루어진 이진행렬을 이용해서 표현할 때, 이진행렬에 대한 사전분포로써 인도부페 프로세스가 이용될 수 있다. 본 논문에서는 인도부페 프로세스를 유한특성모형과 연관지어서 유도하는 방법을 소개하고, 베타프로세스와의 관련성을 간략히 설명한다. 실제 모형의 추론에 인도부페 프로세스가 이용되는 예제를 살펴보기 위해서 가우시안 선형모형에 인도부페 프로세스를 적용한 모형화 방법을 언급하고, 깁스표집 알고리즘, 막대 자르기 알고리즘, 변분방법을 이용한 추론방법을 설명한다. 그리고 이 세 가지 알고리즘을 이용하여 이미지 자료를 분석하는데 적용해본다. 나아가 쌍자료 분석, 네트워크 분석, 독립성분 분석에서 인도부페 프로세스가 어떻게 이용될 수 있는지도 알아본다.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.104-111
• /
• 2000

A fuzzy logic Run-by-Run(RbR) controller and an in -line wafer characteristics prediction scheme for the rapid thermal processing system have been developed for the study of process repeatability. The fuzzy logic RbR controller provides a framework for controlling a process which is subject to disturbances such as shifts and drifts as a normal part of its operation. The fuzzy logic RbR controller combines the advantages of both fuzzy logic and feedback control. It has two components : fuzzy logic diagnostic system and model modification system. At first, a neural network model is constructed with the I/O data collected during the designed experiments. The wafer state after each run is assessed by the fuzzy logic diagnostic system with featuring step. The model modification system updates the existing neural network process model in case of process shift or drift, and then select a new recipe based on the updated model using genetic algorithm. After this procedure, wafer characteristics are predicted from the in-line wafer characteristics prediction model with principal component analysis. The fuzzy logic RbR controller has been applied to the control of Titanium SALICIDE process. After completing all of the above, it follows that: 1) the fuzzy logic RbR controller can compensate the process draft, and 2) the in-line wafer characteristics prediction scheme can reduce the measurement cost and time.

• 한국통신학회논문지
• /
• 제27권10C호
• /
• pp.887-901
• /
• 2002

소프트웨어 관리 모델은 크게 소프트웨어 프로젝트 견적 모델과 소프트웨어 설계평가 모델, 소프트웨어 복잡성 모델, 소프트웨어 신뢰도 성장 모델, 소프트웨어 프로세스 개선 모델 등으로 나누어진다. 그 중에서도 개발된 소프트웨어를 정량적으로 분석하여 평가하는 모델이 소프트웨어 복잡도 모델이다. 즉, 소프트웨어를 객관적으로 관리하는데 있어서 정량적인 판단 기준이 필요하다. 그렇기 때문에 소프트웨어 복잡성 모델(software complexity model)은 소프트웨어의 복잡성에 대한 정량적인 평가에 응용할 목적으로 도입되었으며, 소프트웨어 복잡성 측정시 이 결과를 소프트웨어 관리(software management)의 기준에 이용하는데 있어서 품질이나 생산성에 대한 영향을 제공할 때 정량적이고 명확히 할 필요가 있기 때문이다. 다시 말해서 복잡한 프로그램에는 에러가 많이 포함될 가능성이 높고 또 개발비용(source cost)도 높다는 것을 경험적으로 알 수 있다. 이러한 관계가 성립되지 않는 경우에는 소프트웨어의 효과적인 관리가 곤란하다. 본 논문은 이런 관점에서 대표적인 소프트웨어 복잡성 모델에 대한 적용법에 대해 기술하고 개발중인 교환시스템의 소프트웨어에 대해 volume metrics와 process complexity metrics 방법, 제어구조 및 인터페이스 구조 방법에 대한 분석 결과와 시스템 개발을 수행하는 과정에서 발생되고 있는 문제점들에 대해 다각도로 분석을 하여 이를 유사한 시스템 연구개발 및 프로젝트 관리에 활용하고자 한다.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.77-84
• /
• 1992

This paper constructs Croup Technology process-based learning curve model adjusted to a Group Technology environment which accounts for shared learning that occurs when multiple products utilize some of the same process steps. Through this constructed model, the estimated times and productivity of labor calculated by the Group Technology process-based learning curve model are compared with those generated by employing product-based 1 earning curve model. For sensitivity analysis of the model, the impact of learning rate and the ordered production quantity on the ratio differences between Group Technology process-based learning curve model and product-based learning curve model are examined. These results indicate the critical importance of employing Group Technology process-based learning curve model when a process spans multiple products.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1439-1445
• /
• 2009

본 논문에서는 디지털 도어록 혼류 조립 공정에서의 시뮬레이션 분석모델을 제안한다. 이 모델의 목적은 디지털 도어록 생산 공정 설계에 있어서 여러 대안의 성능에 대해 평가하는 것이다. 시뮬레이션 모델을 개발하기 위하여 먼저 시간연구가 수행되었다. 동시에 ARENA 시뮬레이션 도구를 이용하여 공정분석을 수행하였다. 그 결과 현재의 디지털 도어록 혼류 생산 공정은 여러 품종의 수요 증가에 적절한 생산방식을 제공하지 못한다는 문제점을 발견하였고 이를 개선하기 위한 대안을 제안하였다.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.21-29
• /
• 2010

본 연구는 시뮬레이션 방법을 이용한 자동차용 열 수축 튜브 생산 공정을 가상의 생산 공정 모델로 구현하고, 구현된 모델을 기반으로 열 수축 튜브 생산 공정을 분석하는 연구이다. 자동차용 열 수축 튜브 생산 공정을 분석하기 위해서 공정별로 생성되는 데이터를 수집하고, 수집된 데이터 분석을 통한 자동차용 열 수축 튜브 생산 공정을 분석할 수 있는 가상의 생산 공정 모델을 구현하였다. 구현된 모델을 통해 공정 내에서 발생되는 병목현상 파악 및 원인분석, 공정별 사이클 타임, 부품 생산량 등을 산정함으로써 현 공정 분석 및 개선방안을 모색할 수 있어 기업의 생산 공정관리 효율성을 높일 수 있다.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.23-29
• /
• 2013

Recent advances in printing technology have increased the productivity of the roll-to-roll (R2R) printing process for printed circuitry. In the R2R printed electronics, characteristics of printed and coated layers are one of the most important issues that determine the functional quality of final products. The slot-die technology can coat a large area with high uniformity using low-viscosity materials; determining the process parameters is important to obtain excellent coating qualities. In this study, a viscocapillary model was used to predict qualities of coated layers and patterns. On the basis of analysis results, a novel meta model was derived using design of experiment methodology to improve accuracy. Sensitivity analysis was performed to define major parameters in R2R slot-die coating process. The coating speed was found to most significantly affect the coated layer thickness and was easily controlled. The performance of the proposed model is verified through experimental studies. Based on the statistical analysis results, R2R slot die process can be optimized to guarantee a desired thickness.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.965-983
• /
• 2014

Concurrent behaviors of multithreaded programs cannot be described effectively by automata-based models. Thus, concurrent program intrusion attempts cannot be detected. To address this problem, we proposed the process algebra-based detection model for multithreaded programs (PADMP). We generate process expressions by static binary code analysis. We then add concurrency operators to process expressions and propose a model construction algorithm based on process algebra. We also present a definition of process equivalence and behavior detection rules. Experiments demonstrate that the proposed method can accurately detect errors in multithreaded programs and has linear space-time complexity. The proposed method provides effective support for concurrent behavior modeling and detection.