• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.904-913
• /
• 2011

Previous publications regarding the design and specifications of input filters for STATCOMs usually deal with the input filter only, and seldom pay any attention to the influence of the input filters on the performance of the STATCOM systems. A detailed analysis of the influences of input filters on the stability of STATCOM systems and the corresponding design considerations are presented in this paper. Three types of input filters, L filters, LC filters, and LCL filters, are examined separately. The influences of the parameters of input filters on system stability are investigated through frequency domain methods. With direct current control taken as the major control strategy for the STATCOMs, the different situations when adopting different current detection points are covered in this analysis. A comparison between LC filters and LCL filters is also presented with optimized filter parameters. Based on the analysis, the phase margin, as one of the design considerations for the different types of input filters under different current detection schemes, is discussed. This leads to filter parameters that are different than those of the traditional design. Hardware experimental results verify the validity of the above analysis and design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.817-822
• /
• 1992

Distortion analysis of digital filters for the ECG signal processing is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal fitters. The designed filters are applied to power line interference cancelling in ECG signals.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.137-145
• /
• 1993

Time domain analysis as well as frequency domain analysis of signal conditioning filters is very useful for practical applications. Time domain analysis of digital filters for noise cancelling in ECG signals is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal FIR filters which are widely used for ECG signal processing. Band reject filters are applied to power line interference cancelling in ECG signals.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.362-368
• /
• 2009

SA 필터는 선형 필터와 순서통계에 기초한 비선형 필터의 특성을 모두 포함하는 광범위한 필터 군으로 소개되었으며, 필터의 구조는 다단 필터의 형태로 첫째 단를 이루는 부 필터(sub-filter)의 종류에 따라 SAMAX, SAMIN, SAMED, SAXOR 필터로 불린다. 본 논문에서는 비대칭 노이즈 환경에서 최적 SAMAX 필터와 SAMED 필터를 설계하고 영상신호에 대하여 적용함으로써 그 성능을 비교 분석 하였다. 실험 결과 대칭 노이즈에서는 두 필터의 성능이 동일하지만 비대칭 노이즈에서는 SAMAX 필터가 SAMED 필터 보다 우수한 성능을 가진다는 사실을 보여주었다. 이러한 새로운 사실은 SA 필터의 응용에서 기초적인 지침으로 활용될 수 있을 것이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.70-73
• /
• 1993

Design as well as Distortion analysis of signal conditioning filters is very useful for practical applications. Distortion analysis of digital filters for wave forms detection in ECG signals is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal FIR filters which are widely used for ECG signal processing.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.89-94
• /
• 2006

다성분 탄성파 자료의 신호/잡음비를 높이기 위한 방법의 일환으로 다성분 복소트레이스 분석법을 이용한 분극필터를 개발하였다. 이 필터는 기존의 방법과는 달리, 실체파 신호의 수평/수직 진폭비와 레일리파 타원율을 이용하여 각 시간 샘플의 선형 및 타원형 성분이 정량적으로 계산되며 낮은 신호/잡음비에도 이상적으로 작동하는 특징이 있다. 합성파 뿐만 아니라 실제 자료에 적용시킨 결과, 기존 분극필터보다 타원형 입자운동의 레일리파가 잘 제거되어 선형의 P파 및 S파 신호를 효과적으로 인지할 수 있음을 보인다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1134-1138
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, electrical properties and filtration performance of electrospun filter media are quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. Electrospun filters show same collection efficiency with low pressure drop compare to commercialized HEPA filters. Surface charge potential and surface charge density of electrospun filters are increased with increasing applied voltage. Also collection efficiency of electrospun filters is increased with increasing surface charge potential and surface charge density.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.630-638
• /
• 2005

In FIR (Finite Impulse Response) filter applications, Nth-band F]U digital filters are known to be important due to their reduced computational requirements. The conventional methods for designing F]U filters use iterative approaches such as the well-known Parks-Mcclellan algorithm. The Parks-Mcclellan algorithm is also used to design Nth-band FIR digital filters. But a disadvantage of the Parks-Mcclellan algorithm is that it needs a good amount of design time. This paper describes a direct design method for Nth-band FIR Filters using Chebyshev polynomials, which provides a reduced design time over indirect methods such as the Parks-Mcclellan algorithm. The response of the resulting filter is equiripple in passband. Our proposed method produces a passband response that is equripple to within a minuscule error, comparable to that of the Parks-Mcclellan algorithm.

• 한국물환경학회지
• /
• 제37권5호
• /
• pp.398-404
• /
• 2021

The use of water purifiers has been increasing every year due to increased drinking water safety concerns raised by the water pollution accidents occasionally reported. Currently, more than 10 million water purifiers have been distributed in Korea, and the estimation of the purifier sales reaches two million units per year. As a result, the number of used water purifier filters that must be replaced on a regular basis has gradually increased. However, regardless of the considerations for the capacity of used filters remaining, water purifier filters were replaced and collected at regular intervals. The high cost of disposal of the used filters by landfill or incineration were required. Thus, in this study, the current status and trends of recycling technologies for used water purifier filters were reviewed. It is noted that there was insufficient statistical data to understand the current status of the difference between the number of used water filters discarded and the number of those recycled. Most studies on the recycling of old water purifier filters have concentrated on pretreatment and cleaning methods for sediment filters and membrane filters, with the goal of extending the lifespan of used filters. Further, the study suggested future study directions on the recycling of used water purifier filters, which could be useful information on establishing environmental policy to promote the recycling of used filters.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.248-251
• /
• 1990

A new CAD program for double E-plane bandpass filters is developed based on the variational analysis method and the passband correction method combined with the synthesis procedures. By taking the widths of three narrow waveguide equally, we can design bandpass filters with best stopband characteristics.