• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.491-498
• /
• 2003

The purpose of this study is to analyze the geometric nonlinearity of a toggle system and to evaluate the vibration control performance when the toggle system with a viscous damper was applied to a structure. Numerical analysis shows that the relative displacement of the structure can be amplified by amplification mechanism of the toggle system and the capacity of the damper can be reduced without the loss of vibration control performance. It is also observed that the geometric nolinearity of toggle system using the linear viscous damper has little effect on the performance.

• Geomechanics and Engineering
• /
• v.23 no.1
• /
• pp.1-13
• /
• 2020

To give a solution for seismic stability of tunnel faces subjected to earthquake ground shakings, the pseudo-dynamic approach is originally introduced to analyze tunnel face stability in this study. In the light of the upper-bound theorem of limit analysis, an advanced three-dimensional mechanism combined with pseudo-dynamic approach is proposed. Based on this mechanism, the required support pressure on tunnel face can be obtained by equaling external work rates to the internal energy dissipation and implementing an optimization searching procedure related to time. Both time and space feature of seismic waves are properly accounted for in the proposed mechanism. For this reason, the proposed mechanism can better represent the actual influence of seismic motion and has a remarkable advantage in evaluating the effects of vertical seismic acceleration, soil amplification factor, seismic wave period and initial phase difference on tunnel face stability. Furthermore, the pseudo-dynamic approach is compared with the pseudo-static approach. The difference between them is illustrated from a new but understandable perspective. The comparison demonstrates that the pseudo-static approach is a conservative method but still could provide precise enough results as the pseudo-dynamic approach if the value of seismic wavelengths is large or the height of soil structures is small.

• Biomolecules & Therapeutics
• /
• v.7 no.4
• /
• pp.335-341
• /
• 1999

Antidiabetic activity and mechanism of Supungsungihyan(SPSGH) were examined in db/db mice, which is a spontaneously hyperglycemic, hyperinsulinemic and obese animal model. SPSGH and acarbose were administered orally for 4 weeks. Fasting and non-fasting serum glucose, glycated hemoglobin and trig-lyceride of SPSGH treated group were all reduced when compared with those of db/db control group. At 12th week after birth, SPSGH increased an insulin secretion although statistic significance was not seen. Total activities of sucrose, maltase and lactase in SPSGH treated group were not significantly different from those in db/db control. On the other hand, sucrase and maltase activities in acarbose treated groups were increased. Effect of SPSGH on mRNA expression of glucose transporter(GLUT-4) was also examined by RT-PCR and in vitro transcription with co-amplification of rat $\beta$-actin gene as an internal standard. Muscular GLUT-4 mRNA expression in SPSGH treated group was increased significantly. These results may suggest that SPSGH lowered blood glucose ascribing to upregulation of muscular GLUT-4 mRNA expression.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.5
• /
• pp.314-326
• /
• 2014

On 31 March 2007, the abnormal wave occurred along the western coast of Korea. In order to investigate the generation mechanism of abnormal waves and to understand the amplification process of the abnormal waves, the observed data were analyzed and one-dimensional numerical model experiments were performed by using both the linear shallow water equation and the linear Boussinesq equation models. Various types of pressure jump for the abnormal waves previously proposed by other researchers were reviewed. As a result, it was not possible to reproduce the abnormal waves from the previously proposed pressure jumps. In this study, we proposed a new form of pressure jump, and numerical simulations were performed in order to check the validity of the proposed pressure jump. The numerical results showed that the calculated period of abnormal waves and the maximum water elevations agreed reasonably well with those of the observations.

• Journal of Oriental Neuropsychiatry
• /
• v.22 no.3
• /
• pp.23-42
• /
• 2011

Objectives : The purpose of this study was to investigate the difference of somatization psychological mechanism among Sasang constitution. Methods : Subjects were seventy four students of Won-Kwang university responded the questionnaire. We evaulated the subjects using Minnesota Questionnaire for the Sasang Constitution Classification II(QSCC II), Multiphasic Personality Inventory-2(MMPI-2), 20-item Toronto Alexithymia Scale (TAS-20), Somato-Sensory Amplification Scale(SSAS), Symptom Interpretation Questionnaire(SIQ) and The Ways of Stress Coping Questionnaire(SCQ). Results : From the results of Clinical scale of MMPI-2, the scores of 2nd, 9th, 10th scales was significantly difference. In Lesser Yin group 10th score was the significantly highest of the others, 1st, 3rd, 6th, 7th, 8th score were the highest but not significant. and From the results of PSY-5 scale(The Personality Psychopathology Five scale) of MMPI-2, In Lesser Yin goup, INTR(Introversion/Low Positive Emotion) score was significantly highest, PSYC(psychoticism), NEGE (Negative Emotionality/Neuroticism) was higher than the others. In TAS-20K, SSAS, SIQ and SCQ Lesser Yin group was not significantly difference. but Lesser Yin group had the tendency of difficulty describing feelings and externally oriented thinking and higher score in physical and psychological interpretation. We observed generally lower levels of stress coping strategy scores than the others. Conclusions : These results showed that Lesser Yin group tend to somatization compared other constitution.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.70-74
• /
• 2007

This paper describes the development of a nano-positioning system for nanoscale science and engineering. Conventional positioning systems, which can be expensive and complicated, require the use of laser interferometers or capacitive transducers to measure nanoscale displacements of the stage. In this study, a new self-displacement sensing (SDS) nano-stage was developed using mechanical magnification of its displacement signal. The SDS nano-stage measured the displacement of its movement using a position-sensitive photodiode (PSPD), a laser source, and a hinge-connected rotating mirror plate. A beam from a laser diode was focused onto the middle of the plate with the rotating mirror. The position variation of the reflected beam from the mirror rotation was then monitored by the PSPD. Finally, the PSPD measured the amplified displacement as opposed to the actual movement of the stage via an optical lever mechanism, providing the ability to more precisely control the nanoscale stage. The displacement amplification process was modeled by structural analysis. The simulation results of the amplification ratio showed that the distance variation between the PSPD and the mirror plate as well as the length L of the mirror plate could be used as the basic design parameters for a SDS nano-stage. The PSPD was originally designed for a total travel range of 30 to 60 mm, and the SDS nano-stage amplified that range by a factor of 15 to 25. Based on these results, a SDS nano-stage was fabricated using principle of displacement amplification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1937-1941
• /
• 2004

We present lateral actuated piezoelectric actuator using U-shaped PZT strip and lever structure for the RF switch application. In the previous study of RF switch, they used horizontal contact switch fabricated by thin film metals. However, thin film metals could not generate large contact force due to low stiffness. In this work, we suggest lateral contact switch which makes large contact force by increasing stiffness. In addition, we use PZT actuator for the high force actuation. Generally actuator using thin film PZT moves to the vertical direction due to the neutral axis shift. Therefore we need lateral motion generation mechanism based on the thin film PZT actuator. In order to increase lateral motion of thin film PZT actuator, we use U-shaped PZT actuator using residual stress control. Also, thin film PZT actuator can generate very small lateral motion of 120${\times}$10$^{-6}$ ${\mu}{\textrm}{m}$/V for d$_{31}$ mode, thus we suggest lever structure to increase stroke amplification. From the experimental study, fabricated PZT actuator shows maximum lateral displacement of 1 ${\mu}{\textrm}{m}$, and break down voltage of the thin film PZT actuator is above 16V.

• Earthquakes and Structures
• /
• v.18 no.3
• /
• pp.297-312
• /
• 2020

The KiK-net by NIED is a vertical array measurement system. In the database of KiK-net, singular pulse waves were observed in the seismic record at the borehole of TTRH02 during the mainshock (the magnitude of Japan Meteorological Agency (M_J) 7.3, M_W 6.8) and aftershock (M_j 4.2) of Tottori-ken Seibu earthquake in 2000. Singular pulse waves were also detected in the seismic records at the borehole of IWTH25 during the Iwate-Miyagi Nairiku earthquake in 2008 (M_J 7.2, M_W 6.9). These pulse waves are investigated by using the wave shape analysis methods, e.g., the non-stationary Fourier spectra and the double integrated displacement profiles. Two types of vibration modes are discriminated as the occurrence mechanism of the singular pulse waves. One corresponds to the reversal points in the displacement profile with the amplitude from 10^-4 m to 10^-1 m, which is mainly related to the fault activity and the amplification pass including the mechanical amplification (collision) of the seismograph in the casing pipe. The other is the cyclic pulse waves in the interval of reversal points, which is estimated as the backlash of the seismograph itself with the amplitude from 10^-5 m to 10^-4 m.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.434-441
• /
• 2013

Bending motion has been used in the surgical instruments with bending structures and tendon mechanisms. A simplified bending angle amplification ratio between the proximal and distal bending joint was derived in this article. The bending structure of disk and rib in the proximal joint was analyzed based on finite element method with an emphasis on the circumferential uniformity of bending stiffness. Regarding the distal joint, optimal design and sensitivity analysis was done with four design variables of outer and inner diameter, rib height and rib width while maximizing the deformation under the stress distribution below the yield stress. Outer diameter and rib width are most critical to maximum deformation as the outer diameter and inner diameters are so to maximum equivalent stress.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1285-1289
• /
• 2006

In a large diameter piping system, high frequency energy can produce excessive noise, high vibration, and failures of thermo-well, instrumentation, and attached small-bore piping. High frequency energy is generated by flow induced vibration like vortex shedding in orifices and valves. Once this energy is generated, amplification may occur from acoustical and/or structural resonances, resulting in high amplitude vibration and noise. At low frequencies, pipe vibration occurs laterally along the pipe's length, but at higher frequencies, the pipe shell wall vibrates radially across its cross-section. The simple beam analogy which is based on the beam mode vibration can not be applied to evaluate shell mode vibration. ASME OM3 recommends that the stress be measured directly by strain gauge and be evaluated according to the fatigue curves of the piping material. This Paper discusses the excitation and amplification mechanism relevant to high frequency energy generation in piping system, the monitoring method of the shell mode vibration in ASME OM3, the evaluation method generally used in the industry. Finally this paper presents the stress evaluation of the cavitating venturi down stream piping, where high frequency shell mode vibrations were observed during the operation.