• 제목/요약/키워드: Amount of Use

검색결과 5,457건 처리시간 0.033초

매립석탄회 고배합 콘크리트 배합설계 기법 (Concrete Mixture Design Method with Large Amount of Land Reclamation Ash)

  • 한상묵;송영철;하재담
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.344-347
    • /
    • 2004
  • The amount of coal ash has been increasing and development of effective use is urgently needed. Various by-products and waste are expected to be used as resources from the point of reduction in environmental load. This is an experimental study to compare the properties of high volume coal ash concrete using the reclaimed coal ash. For this purpose, authors have started work to develop a production method of hardening coal ash concrete. Laboratory tests show that the optimum mixture of coal ash concrete can be determined from multiple regression analysis. According to test results, it was found that the compressive strength of the concrete can be determined by a single curve. And it is obtained from the analysis of the results tested for concrete with the ratio of total power to water and amount of land reclamation ash.

  • PDF

Sensing and Compression Rate Selection with Energy-Allocation in Solar-Powered Wireless Sensor Networks

  • Yoon, Ikjune
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권5호
    • /
    • pp.81-88
    • /
    • 2017
  • Solar-powered wireless sensor nodes can use extra energy to obtain additional data to increase the precision. However, if the amount of data sensed is increased indiscriminately, the overhead of relay nodes may increase, and their energy may be exhausted. In this paper, we introduce a sensing and compression rate selection scheme to increase the amount of data obtained while preventing energy exhaustion. In this scheme, the neighbor nodes of the sink node determine the limit of data to be transmitted according to the allocated energy and their descendant nodes, and the other nodes select a compression algorithm appropriate to the allocated energy and the limitation of data to be transmitted. A simulation result verifies that the proposed scheme gathers more data with a lower number of blackout nodes than other schemes. We also found that it adapts better to changes in node density and the amount of energy harvested.

An Effective Information Visualization Technique for Intrusion Detection: Hyperbolic View Intrusion Visualizer

  • Jeong, Yun-Seok;Myung, Ro-Hae
    • 대한인간공학회지
    • /
    • 제30권2호
    • /
    • pp.319-330
    • /
    • 2011
  • In computer forensics investigation, the investigators collect, protect, analyze and interpret massive amount of data which were used in cyber crime. However, due to its huge amount of information, it takes a great deal of time and errors often result even when they use forensics investigation tool in the process. The information visualization techniques will greatly help to improve the information processing ability of human when they deal with the overwhelming amount of data and have to find out significant information in it. The importance of Intrusion Detection System(IDS) among network forensics is being emphasized in computer forensics. In this study, we apply the information visualization techniques which are proposed to be a great help to IDS and carry out the usability test to find out the most effective information visualization techniques for IDS.

고로슬래그 미분말을 혼입한 기포콘크리트의 물리적 특성 (Physical Properties of Foamed Concrete using Blast-Furnace Slag)

  • 조은석;임정준;송하영;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.164-165
    • /
    • 2019
  • Light-weight foamed concrete using cement as a raw material consumes a lot of energy and generates $CO_2$ because of the high temperature firing process in the manufacturing process of cement. This study was carried out to evaluate the use of blast furnace slag through the properties analysis by substituting a certain amount of blast furnace slag as an industrial by-product as a substitute for cement. The experimental results showed similar characteristics to those of using only cement when the blast furnace slag fine powder was used in an appropriate amount. Therefore, if a certain amount of cement is replaced with blast furnace slag powder, it can maintain similar quality, reduce natural resources and energy consumption, and reduce carbon dioxide emissions.

  • PDF

여대생의 향수 소비행동에 관한 연구 -향수 사용도에 따른 소비자집단별 특성을 중심으로- (Perfume Consumption Behaviors of Female College Students - Based on the frequency of perfume usage -)

  • 이경화;류은정;김경화
    • 복식
    • /
    • 제50권6호
    • /
    • pp.143-153
    • /
    • 2000
  • The purpose of this study was to find out the relationship among the frequency of perfume usage and perfume attitude. perfume consuming behaviors and demographies. The data were collected from 352 female college students using questionnaire. Three groups including Large amount users(30.1%), Medium amount users(33.8%), and Small amount users(36.1%) were identified by the frequency of perfume usage. The results were summarized as follows : 1. There were significant differences on perfume attitudes and perfume consuming behaviors among the three groups. The more they use perfume, the more they feel pleasure and self-confidence. Most subjects preferred overseas prestige and popular perfume. And they obtained perfume informations through magazine ads and article. 2. There were significant differences demographic characteristics among the three groups. The older and the higher social status frequently used perfume. This study will provide useful marketing data and implications for activation of domestic perfume market.

  • PDF

고분자전해질 연료전지의 환원전극 백금 담지촉매의 백금 담지비에 따른 성능변화 (Effect of Pt amount in the Pt/C for cathode catalyst on the performance of PEMFC)

  • 조용훈;조윤환;박현서;성영은
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.107-109
    • /
    • 2006
  • This study focuses on a determination of amount of Pt in the Pt/C for catalysts of polymer electrolyte membrane fuel cells (PEMFC). PEMFC offer low weight and high power density and being considered for automotive and stationary power applications. The PEMFC performance is influenced by several factors, including catalysts and structure of electrode and membrane type. Catalyst of electrode is important factor for PEMFC. One of the obstacles prevent ing polymer electrolyte membrane fuel cells from commercialization is the high cost of noble metals to be used as catalyst, such as platinum To effectively use these metals, they have to be will dispersed to small particles on conductive carbon supports. The optimal amount of Pt in Pt/C for cathode catalyst was investigated by using polarization curves in single cell with $H_2/O_2$ operation.

  • PDF

수축저감제 혼입량에 따른 건조수축 특성 검토 (Study on Properties of Dry Shrinkage according to Amount of Shrinkage Reduction Agent)

  • 서태석;이현승;김강민;윤섭
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.209-210
    • /
    • 2021
  • This study aims to develop ultra-low-shrinkage high-quality concrete. Therefore, the concrete drying shrinkage characteristics according to the type and amount of the shrinkage reducing agent were reviewed. As a result, the performance of Hexylene Glycol(HG) and Polyol was superior to that of PolyEthylene Glycol(PEG), which is most widely used in Korea. In addition, the shrinkage reduction effect was improved as the amount of PEG was increased, but the disadvantage of the strength reduction when excessive use was confirmed.

  • PDF

가스의 용해량에 따른 ABS 수지의 점도 변화 (The Viscosity Change of ABS Resin According to Inert Gas Amount)

  • 정태형;하영욱;정대진
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.585-590
    • /
    • 1997
  • Conventional foaming process has defects such as lower mechanical properties than ur~foaming material due to non-uniform cell distribution and environmental pollution problem caused by chemical blowing agency. So, a new foaming process such as Microcelluar plastics has been introduced to use inactive gases as a foaming agency. In order to apply Microcellular plastics for mass production process system such as extrusion, injection molding and blow molding, it needs to predict the change in material properties of polymer according to the amount of meltingas. In Polymer molding applying Microcelluar plastics, the change of viscosity among several material properties is the most important factor. Therefore, this paper is aimed to establish the method which not only finds out but also predicts the change of viscosity of ABS(Acrylonitri1e Butadiene Styrene) resin according to inert gas amount in extrusion molding.

  • PDF

다층 건축구조물의 효율적인 연직진동해석 (Efficient Analysis for Vertical Vibration of Multistory Buildings)

  • 이동근;안상경
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.129-136
    • /
    • 1999
  • This research proposes an effective analytical methodology for vertical vibration of three dimensional frame structures including slabs. The consideration of slabs, although allows more precise results, requires large amount of computer time and memory space due to the use of plane stress elements. In consideration of these problems, a method to properly manage nodal points and degrees of freedom is proposed based on matrix condensation technique. Also studied is the use of substructure method to obtain fast and reliable results with simple input data when they are applied to conventional building structures.

  • PDF

아파트의 층수와 주거인구가 생활용수량(生活用水量)에 미치는 영향(影響) (Effect on the amount of domestic water use by the water pressure and the number of a family in each house)

  • 현인환;지병준;이상준;이제인
    • 상하수도학회지
    • /
    • 제14권3호
    • /
    • pp.217-223
    • /
    • 2000
  • This study is to investigate the effect on the mount of domestic water use by the water pressure and the number of a family for the each house. Tow apartment sites which had elevated water tanks on the roof were selected as the reserch area. Tow techniques such as Analysis of Variance(ANOVA) and Analysis of Correlation were used for the analysis.

  • PDF