• 자원리싸이클링
• /
• 제29권5호
• /
• pp.28-37
• /
• 2020

본 연구에서는 알칼리 영역의 소듐바나데이트(NaVO₃) 수용액을 출발물질로 사용하여 침전온도, 염화암모늄 첨가량 및 첨가방법, 수용액의 바나듐 및 수산화나트륨 함량 등이 암모늄메타바나데이트 침전거동에 미치는 영향을 알아보았다. 수용액 pH가 감소할수록, 염화암모늄 첨가량 그리고 수용액의 바나듐 함량이 증가할수록 암모늄메타바나데이트 침전률이 증가하였다. 본 연구조건에서 90% 이상의 암모늄메타바나데이트 침전률을 얻기 위한 기본 조건은 수용액 바나듐 함량 10,000mg/L, 고체 염화암모늄 첨가량 2당량, 침전온도 상온, 침전시간 2시간 이었다. 암모늄메타바나데이트는 침전속도 증가에 따라 침전물 크기가 감소하였으며, 특히 염화암모늄을 액체로 투입할 때, 침전속도는 가장 느리며 침전물 크기는 가장 크게 나타났다. 염화암모늄을 고체로 첨가하여 1차 침전반응 후, 새로운 반응물을 첨가하여 2차 침전반응을 시킬 때, 고체 염화암모늄을 첨가한 침전반응은 수용액에 존재하는 침전물에 영향을 받지 않았다. 그러나 염화암모늄 수용액을 첨가하였을 때는 수용액에 존재하는 침전물 표면에 침적되어 그 크기를 증가시켰다. 수용액 온도에 따른 암모늄메타바나데이트 용해도 차이에 의하여, 바나듐 함량 10,000mg/L 수용액에서는 침전온도가 암모늄메타바나데이트 침전에 영향을 미치며, 바나듐 함량 30,000mg/L 이상의 고농도 수용액에서는 침전온도가 침전반응에 영향을 미치지는 못하였다.

• 자원리싸이클링
• /
• 제28권5호
• /
• pp.42-50
• /
• 2019

본 연구에서는 바나듐을 회수하기 위하여 수용액의 바나듐과 염화암모늄 침전반응에 관하여 고찰하였다. 바나듐 함유 수용액 pH 9.2 ~9.4에서는 결정구조가 [$NH_4VO_3$]인 암모늄메타바나데이트가 침전되었고, 바나듐 함유 수용액의 pH를 황산으로 조절하면 결정구조가 [$(NH_4)_2V_6O_{16}$]인 암모늄폴리바나데이트가 침전되었다. 암모늄폴리바나데이트[$(NH_4)_2V_6O_{16}$]는 바나듐 함유 수용액 pH 2에서는 침전온도 $80{\sim}90^{\circ}C$에서, 그리고 수용액 pH 6 ~ 8에서는 침전온도 $40^{\circ}C$에서 침전되었다. 또한 수용액 pH 2인 산성 영역에서 99% 이상의 침전률을 얻기 위해서는 수용액의 바나듐 함량이 3,000 mg/L 이상은 되어야 하며, 침전온도는 $80^{\circ}C$ 이상으로 유지해야 한다. 알칼리 영역에서 암모늄메타바나데이트를 침전시킬 때, 바나듐 함량은 10,000 mg/L 이상 그리고 침전온도는 $40^{\circ}C$로 유지해야 침전률을 높일 수 있었다. 알루미늄은 수용액의 바나듐 함량 및 pH에 상관없이 거의 침전이 일어나지 않았으나, 철 성분은 염화암모늄과 반응하여 암모늄 자로사이트 형태로 침전되며, 따라서 바나듐의 회수율을 높이기 위해서는 Fe 성분을 우선적으로 제거해야만 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.365-369
• /
• 2001

EAF's dust has been treated mainly by pyrometallurgical reduction process in rotary kiln furnace to recover valuable metal elements such as Zn and to avoid the disposal of hazardous materials to waste. Recently, hydrometallurgical eletrowinning of zinc from a zinc-amino chloride solution obtained by the leaching of EAF's dust was developed to recover high grade zinc metal from EAF’s dust. But there are some disadvantages in each process such as difficulty of operation condition control and sticking problem in kiln process and low extractability and recovery of zinc owing to insoluble zinc-ferrite in electrowinning process. We propose a new combined process of pyrometallurgical one and hydrometallurgical one to treat EAF's dust efficiently and economically. In this study, ammonium chloride solution leaching of crude zinc oxide recovered from reduction of EAF's dust was carried out to find out the efficiency of zinc extraction from it and the possibility for performance of eletrowinning in the proposed process. Effects of various leaching variables ruck as leaching temperature, concentration of leaching solution and leaching time were investigated. And the leaching results of the crude zinc oxide were compared with those of EAF's dust. The extraction percents of zinc in ammonium chloride solution leaching of the crude zinc oxide recovered from reduction of EAF's dust were above 80% after 60 minutes of leaching under the leaching condition of 4M NH$_4$CI concentration and above leaching temperature of 7$0^{\circ}C$. And the concentrations of zinc in the leached solution were obtained above 50g/$\ell$. The activation energy calculated for zinc extraction in NH$_4$CI leaching was 58.1 KJ/㏖ for EAF's dust and 15.8 KJ/㏖ for the crude zinc oxide recovered from reduction of EAF's dust.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.1009-1014
• /
• 2001

In aqueous mixtures of cationic OTAC (octadecyl trimethyl ammonium chloride) and anionic ADS (ammonium dodecyl sulfate) surfactants, mixed micelles were formed at low (< 0.2 wt %) total surfactant concentrations. For these mixtures mixed micelliza tion and interaction of surfactant molecules were examined. Mixed critical micelle concentration (CMC), thermodynamic potentials of micellization, and minimum area per surfactant molecule at the interface were obtained from surface tensiometry and electrical conductometry. The mixed micellar compositions and the estimation of interacting forces were determined on the basis of a regular solution model. The CMCs were reduced, although not substantial, and synergistic behavior of the ADS and OTAC in the mixed micelles was observed. The CMC reductions in this anionic/cationic system were comparable to those in nonionic/anionic surfactant systems. The interaction parameter $\beta$ of the regular solution model was estimated to be -5 and this negative value of $\beta$ indicated an overall attractive force in the mixed state.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.47-48
• /
• 2015

Recycled aggregate used in a site is strong alkali due to calcium hydroxide attached on its surface. Accordingly, many environmental problems arise. Therefore, as basic research to reduce pH of recycled aggregate, this study tries to reduce the strong alkalinity of recycled aggregate by using mixture solution based on sodium phosphate and ammonium chloride. As a result, original aggregate has the strong alkalinity of pH 11.23, whereas pH of recycled aggregate immersed in mixture solution decreased as more mixture rate increased, and mostly pH 9.8 or less was found.

• 한국표면공학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 1986

Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolysis by hydrometallurgical techniques such as the neutralization with ammonium hydroxide and cementation on manganese powder. The electrodeposition of manganese from the purified chloride solution with sodium selenate was performed. Cathode current efficiency was found to be affected significantly by the concentration of sodium selenate and ammonium chloride salt, bath temperate, current density and PH. The current efficiency of about 88.7% was obtained by electrolysis manganese chloride solution with sodium selenate (0.1/g) at 10$^{\circ}C$.

• 한국표면공학회지
• /
• 제21권4호
• /
• pp.168-175
• /
• 1988

The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion resistance and brightness in various conditions of electrodeposition were investigated, in the range of ultrasonic irradiation of 50,500 and 1,000kc/s respectively. The results obtained are as follows; 1. the ratio of nikel to zinc in the deposit increased according 시 the ammonium chloride concentration in irradiated baths. 2. The current efficiencies became also higer in the irradiated bath. 3. Ammonium ions in solution seem to retard formation of zinc hydroxide. 4. The corrsion resistance and brightness of the deposits are dependent upon nickel content of deposits which ranges 10-18%(wt)nickel in the irradiated baths and 11-15%(wt)in ninirradisted baths. 5. The corrosion resistance and brightnes of the deposited are appreciably better in the irradiated baths than in non-irradiated bath with the mole ratio of 3.4(NH+4/Ni+++Zn++).

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.276-287
• /
• 2019

In this study, cotton fibers were coated with a different weight percentage of octadecyl dimethyl(3-triethoxy silylpropyl) ammonium chloride(ODDMAC) to improve antimicrobial and water repellent properties. First, the ODDMAC dissolved in ethanol to prepare a solution. Then the cotton fibers were immersed in the ODDMAC/ethanol solution for 10 minutes at ambient temperature and dried at 80℃ for 3 minutes followed by curing. The treated cotton fibers were characterized by scanning electron microscopy(SEM) and x-ray photoelectron spectroscopy(XPS). The treated cotton fibers revealed sufficient antimicrobial activity against Klebsiella pneumoniae(ATCC 4352) and Staphylococcus aureus(ATCCBAA-1707). The hydrophobic nature of the treated cotton fibers was characterized by contact angle measurement. The results showed that the cotton fibers treated with the ODDMAC showed excellent hydrophobic properties which improved to 121°.

• 전기화학회지
• /
• 제5권2호
• /
• pp.57-61
• /
• 2002

본 연구에서는 염화암모늄을 함유한 전해질에서 CoP 자성합금 박막을 전기도금 방식으로 제조하고 염화암모늄의 첨가량이 다른 용액에서의 CV 등 전기화학적인 분석을 통해 핵생성과 결정화(electrocrystallization)에 미치는 영향을 고찰하여 자기적 성질과의 상호관계를 밝히고자 하였다. 용액 중에 첨가된 염화암모늄은 첨가량이 많을수록 분극도를 감소시키고, charge transfer에 의해 electrocrystallization과정을 속도론적으로 제어함으로써 결정립의 크기가 커지고 orientation factor가 증가된다. 이러한 구조적, 결정학적 변화가 CoP 도금층의 자기적 성질을 변화시킴을 관찰하였다.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.166-173
• /
• 2000

Various kinds of water soluble N,N,N-trimethylchitosan ammonium chloride(TMC) with different molecular weights were synthesized to examine the antimicrobial activity against Methicillin Sensitive Staphylococcus aureus(MSSA) and Methicillin Resistant Staphylococcus aureus(MRSA), which causes serious hospital infection, and to apply them to antimicrobial finishing agents for textiles. Chitosan samples were highly deacetylated with sodium hydroxide solution and degraded with hydrogen peroxide to control the molecular weight. TMC has the antimicrobial activities against MRSA and MSSA. TMC showed an excellent antimicrobial activity below the molecular weight of 70,000, especially at 40,000. The minimum inhibitory concentration (MIC) of TMC with optimum molecular weight against MRSA and MSSA was 250ppm. Because MRSA did not resist TMC in the subculture test of bouillon medium, it was expected that the successive use of TMC against MRSA was possible.