• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.140-145
• /
• 2016

Excessive occlusal wear causes loss of tooth structure, occlusal plane disharmony, impaired function and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by the growth of alveolar bone and tooth eruption, minimal increase of occlusal vertical dimension may be required for esthetics and retention of prosthesis. In this case, a 44-year-old male patient visited Seoul National University Dental Hospital with chief complaint of severe tooth wear and shade disharmony. Based on assessment of diagnostic wax-up, 3 mm increase of occlusal vertical dimension was determined. Removable occlusal splint and interim prosthesis was used to ascertain patient's comfort and adaptation. After the adaptation period, definitive prosthesis fabricated with full-contour monolithic zirconia were delivered and the patient was recommended to wear a nightguard device for prosthesis protection. This report presents a case of full mouth rehabilitation with the elevation of patient's occlusal vertical height, resulting in satisfactory esthetics and functions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.555-560
• /
• 2002

Replantation may be a treatment choice for a completely avulsed tooth caused by a traumatic injury. The outcome of replantation depends on the following factors ; minimal damage to pulp and periodontal membrane, the length of time the avulsed tooth was out of the mouth, how the tooth was stored, the level of root formation, etc. The time from the act of avulsion of the tooth to the actual replantation is especially important. Generally, when replanted within 30 minutes, more than 90% of the cases succeed, but when the time is between 30 to 90minutes, 43%, and greater than 90 minutes, 7%. This is a case of a replanted tooth with relatively good prognosis by ankylosis though there was a great time lapse since the tooth was avulsed. Though such treatment lead to loss of the tooth, in cases of children or adolescents, this treatment is meaningful, because it may earn time until any definitive therapy, functionally stimulate the alveolar bone to retain its height for a better prognosis for future treatment, and act as space maintainer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.333-338
• /
• 2008

Supernumerary teeth are characterized by an excess number of teeth, which can be responsible for a variety of irregularities in the primary and transitional dentition. Supernumerary teeth, especially in the maxillary anterior region, may prevent the eruption of adjacent permanent teeth and cause their ectopic eruption, diastema, root resorption, or formation of dentigerous cyst. Therefore, early diagnosis of supernumerary teeth is important for prevention of such complications, and adequate treatment should be given according to their location, number, and morphologic features. In this case, four supernumerary teeth in the maxillary anterior region were disturbing the eruption of adjacent permanent incisors. Two of them were located in proximity to the central incisor tooth germs that their immediate removal may injure the permanent tooth germs. In order to minimize such complications, surgical extraction of the four supernumerary teeth was performed in two stages. At first, only two inverted conical supernumerary teeth were extracted. The other two tuberculous supernumerary teeth, close to the permanent tooth germs, were extracted later after their natural dislocation. In that way, we could minimize affects on the neighboring permanent tooth germs and also the amount of alveolar bone removed during surgery.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.591-596
• /
• 2009

In the case of the impacted teeth, the clinician has to consider development of tooth, site of impaction, eruption path, and cooperation of patient. Treatment options for the management of impacted teeth are separated into four categories: observation, intervention, orthodontic or surgical relocation and extraction. Autotransplantation may be defined as the transplantation of embedded, impacted or erupted teeth, from one site to another in the same individual into extraction site or surgically prepared sockets. Autotransplantation ensures preservation of natural tooth, induction of alveolar bone growth and root development, offers one of the fastest and most economically feasible means in the replacement of young patients' missing teeth. This case presents a malpositioned impacted mandibular premolar of an 11-year-old girl. It was thought that orthodontic traction was difficult because of its unfavorable impacted position. Therefore the tooth was treated by autotransplantation, we can observe good healing pattern during 12 months.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.677-685
• /
• 2000

Anchorage plays an important role in orthodontic treatment. Because of limited anchorage Potential and acceptance problems of intra- or extraoral anchorage aids, endosseous implants have been suggested and used. However, clinicians have hesitated to use endosseous implants as orthodontic anchorage because of limited implantation space, high cost, and long waiting period for osseointegration. Titanium miniscrews and microscrews were introduced as orthodontic anchorage due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and their ability to be placed in any area of the alveolar bone. In this study, a skeletal Class II Patient was treated with sliding mechanics using M.I.A.(micro-implant anchorage). The maxillary micro-implants provide anchorage for retraction of the upper anterior teeth. The mandibular micro-implants induced uprighting and intrusion of the lower molars. The upward and forward movement of the chin followed. This resulted in an increase of the SNB angle, and a decrease of the ANB angle. The micro-implants remained firm and stable throughout treatment. This new approach to the treatment of skeletal Class II malocclusion has the following characteristics . Independent of Patient cooperation. . Shorter treatment time due to the simultaneous retraction of the six anterior teeth . Early change of facial Profile motivating greater cooperation from patients These results indicate that the M.I.A. can be used as anchorage for orthodontic treatment. The use of M.I.A. with sliding mechanics in the treatment of skeletal Class II malocclusion increases the treatment simplicity and efficiency.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.384-398
• /
• 2011

Objective: The purpose of this study was to analyze the stress distribution and the displacement pattern of mandibular anterior teeth under various intrusive force vectors according to the position of orthodontic miniscrews and hooks, using three-dimensional finite element analysis. Methods: A three-dimensional finite element model was constructed to simulate mandibular teeth, periodontal ligament, and alveolar bone. The displacement of individual tooth on three-dimensional planes and the von Mises stress distribution were compared when various intrusion force vectors were applied. Results: Intrusive forces applied to 4 mandibular anterior teeth largely resulted in remarkable labial tipping of the segment according to the miniscrew position. All 6 mandibular anterior teeth were labially tipped and the stress concentrated on the labiogingival area by intrusive force from miniscrews placed mesial to the canine. The distointrusive force vector led to pure intrusion and the stress was evenly distributed in the whole periodontal ligament when the hook was placed between the central and lateral incisors and the miniscrew was placed distal to the canine. Conclusions: Within the limits of this study, it can be concluded that predictable pure intrusion of the 6 anterior teeth segment may be accomplished using miniscrews placed distal to the canine and hooks located between the central and lateral incisors.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.345-371
• /
• 1994

Restorative procedures can lead to weakening tooth due to reduction and alteraton of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus and depth are very important. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional. finite element models were made by serial photographic method and cavity depth(1.7mm, 2.4mm) and isthmus (11 4, 1/3, 1/2 of intercuspal distance) were varied. linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B, G and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. G model(Gap Distance: 0.000001mm) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). When compression occurred along the interface, the forces were transferred to the adjacent regions. However, tensile forces perpendicular to the interface were excluded. R model was assumed non-connection between the restoration and cavity wall. No force was transferred to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, von Mises stress, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows: 1. G model showed stress and strain patterns between Band R model. 2. B model and G model showed the bending phenomenon in the displacement. 3. R model showed the greatest amount of the displacement of the buccal cusp followed by G and B model in descending order. G model showed the greatest amount of the displacement of the lingual cusp followed by B and R model in descending order. 4. B model showed no change of the displacement as increasing depth and width of the cavity. G and R model showed greater displacement of the buccal cusp as increasing depth and width of the cavity, but no change in the displacement of the lingual cusp. 5. As increasing of the width of the cavity, stress and strain were not changed in B model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in G and R model. The possibility of the tooth fracture was increased. 6. As increasing of the depth of the cavity, stress and strain were not changed in B and G model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in R model. The possibility of the tooth fracture was increased.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.308-329
• /
• 1997

A lot of the research paper was reported about the result of influence of IMC (Intra-mobile connector) in the IMZ implant placed solely in the alveolar bone, but reports about the effect of IMC on functional load at state of connecting with natural teeth ere rare. The major propose of this study was find the mechanical character of IMC itself by using the finite element analysis program after simulated variance of condition connected with the natural teeth and implant on funcional load. When first and second premolar was lost, IMZ implant was placed with a diameter of 3.3mm and a length of 13mm with IMC in second premolar area. Rigid connection was done and the non-figid connention was located on the female part of the canine abutment and the implant respectively and then both the infraocclusion of $30{\mu}m$ and the non-infraocclusion under the load of 40kg applied to the portion of the natural teeth, the pontic and the implant. The displacement and the stress of it was estimated and analyzed IMC itself of the rigid connection and the non-rigid connection was grouped. The following result were obtained. 1. In all groups, the displacement of Y-axis was greater than that of X-axis and the aspect of displacement showed that IMC was displaced downward and to the center. 2. There was no differences in the displacement of IMC regardless of the connection type. 3. In the displacement of IMC, I 4 was the least, I 1 and I 3 are similar and I 2 was the greatest. 4. There was no differences in the peak value of maximal stress of IMC regardless of the connection type. 5. In the peak value of maximal stress of IMC, I 4 was the least, I 1 and I 3 were similar, and I 2 was the largest.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.

• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.86-90
• /
• 2003

Bulla is an air-filled space within the lung parenchyma resulting from deterioration of the alveolar tissue. Molecular mechanism of the formation of the bulla is not well described. Fibroblast growth factor(FGF)-7, bone morphogenetic protein(BMP) receptor, and transforming growth factor(TGF)-$\beta$ receptor are known to have a stimulatory or inhibitory role in the lung formation. We investigated to see if these growth factor or cytokine receptors are involved in the bulla formation by immunohistochemical staining of bullous lung tissues from patients with primary spontaneous pneumothorax. Material and Method: Bullous lung tissues were obtained from 31 patients with primary spontaneous pneumothorax, including 30 males and 1 female from 15 to 39 years old. The bullous tissues were obtained by video-thoracoscopic surgery and/or mini-thoracotomy and fixed in formalin. Blocks of the specimens were embedded with paraffin and cut into 5-6 ${\mu}{\textrm}{m}$ thick slices. The sections were deparaffinized and hydrated and then incubated with primary antibodies against FGF-7, BMP-RII, or TGF-RII. Result: Of the 31 patients, 24 were TGF-RII positive including 18 strong and 6 weak positives. Observation with high magnification showed that strong immunostaining was detected in the boundary region between bullous and normal lung tissues. In contrast, all of the sections were negative with FGF-7 or BMP-RII antibodies. Conclusion: These results suggest that overexpression of TGF- P RII may be involved in the formation of bulla, although further molecular studies are needed to find out more detailed molecular mechanisms.