• 제목/요약/키워드: Aluminum sulfide

검색결과 26건 처리시간 0.02초

Verification of mechanical failure mode through corrosion test of a pump for soil sterilizer injection

  • Han-Ju Yoo;Jooseon Oh;Sung-Bo Shim
    • 농업과학연구
    • /
    • 제50권4호
    • /
    • pp.817-828
    • /
    • 2023
  • Deteriorating soil physical properties and increasing soil pathogens due to the continuous cultivation of field crops are the leading causes of productivity deterioration. Crop rotation, soil heat treatment, and chemical control are used as pest control methods; however, each has limitations in wide application to domestic agriculture. In particular, chemical control requires improvement due to direct exposure to sterilizing solution, odor, and high-intensity work. To improve the overall domestic agricultural environment, the problems of time and cost, such as field maintenance and cultivation scale, must be addressed; therefore, mechanization technology for chemical control must be secured to derive improvement effects in a short period. Most related studies are focused on the control effect of the DMDS (dimethyl disulfide) sterilizer, and research on the performance of the sterilization spray device has been conducted after its introduction in Korea, but research on the corrosion suitability of the material is lacking. This study conducted a corrosion test to secure the corrosion resistance of a soil sterilizer injection pump, and a mechanical failure mode by corrosion by the material was established. The corrosion test comprised operation and neglect tests in which the sterilizing solution was circulated in the pump and remained in the pump, respectively. As a result of the corrosion test, damage occurred due to the weakening of the mechanical strength of the graphite material, and corrosion resistance to aluminum, stainless steel, fluororubber, and PPS (polyphenylene sulfide) materials was confirmed.

황화 암모늄을 이용한 Al2O3/HfO2 다층 게이트 절연막 트랜지스터 전기적 및 계면적 특성 향상 연구 (Improvement of the carrier transport property and interfacial behavior in InGaAs quantum well Metal-Oxide-Semiconductor Field-Effect-Transistors with sulfur passivation)

  • 김준규;김대현
    • 센서학회지
    • /
    • 제29권4호
    • /
    • pp.266-269
    • /
    • 2020
  • In this study, we investigated the effect of a sulfur passivation (S-passivation) process step on the electrical properties of surface-channel In0.7Ga0.3As quantum-well (QW) metal-oxide-semiconductor field-effect transistors (MOSFETs) with S/D regrowth contacts. We fabricated long-channel In0.7Ga0.3As QW MOSFETs with and without (NH4)2S treatment and then deposited 1/4 nm of Al2O3/HfO2 through atomic layer deposition. The devices with S-passivation exhibited lower values of subthreshold swing (74 mV/decade) and drain-induced barrier lowering (19 mV/V) than the devices without S-passivation. A conductance method was applied, and a low value of interface trap density Dit (2.83×1012 cm-2eV-1) was obtained for the devices with S-passivation. Based on these results, interface traps between InGaAs and high-κ are other defect sources that need to be considered in future studies to improve III-V microsensor sensing platforms.

악취황 성분의 채취와 샘플백 내부의 시료 유실율 비교: 검량선의 기울기를 이용한 평가 (Reduced sulfur gas loss in the bag sampling procedure - Comparison by calibration slope values)

  • 김기현;최여진;안지원
    • 분석과학
    • /
    • 제18권4호
    • /
    • pp.338-343
    • /
    • 2005
  • 본 연구에서는 실온조건에서 황성분의 채취에 사용하는 두 가지 백 방식의 시료회수율을 비교 분석하였다. 이를 위해, 가스-타잇 주사기 내부에서 원표준시료를 희석하여 검량선을 작성하였다. 그리고 이에 대비하여 테들러 백이나 플리에스터 백으로 희석한 표준시료를 이용하여 검량선을 확보하였다. 가스타잇 주사기로 확보한 검량선과 백으로 확보한 검량선의 기울기를 비교하는 방식으로 백방식의 시료 손실 또는 회수율을 비교분석한 결과, 테들러 백의 경우 평균 87%의 회수율, 폴리에스터 백의 경우 평균 77% 수준의 회수율이 관측되었다. 결과적으로 백방식으로 시료를 채취할 경우, 시료의 손실이 확인되었다. 따라서 백방식의 현장시료 채취를 할 경우, 시료의 손실에 대한 가능성을 염두에 두고 이와 관련된 여러 가지 인자들을 동시에 검정하는 것이 중요하다고 결론지을 수 있다.

우리나라 동남부 지역의 열수광상에 대한 광물학적 및 광상학적 연구: (4) 김해납석광상 (Mineralogy and Genesis of Hydrothermal Deposits in the Southeastern Part of Korean Peninsula: (4) Kimhae Napseok Deposit)

  • 김수진;추창오;조현구
    • 한국광물학회지
    • /
    • 제6권2호
    • /
    • pp.122-144
    • /
    • 1993
  • 김해납석광상의 기원과 광물의 산상 및 광물의 안정성에 관하여 연구하였다. 이 지역의 지질은 제3기 화산암류와 이를 관입한 화강섬록암으로 구성되는데, 화산암류의 암질은 안산암질응회암, 석영안산암질응회암, 그리고 안산암질응회암과 혼재하는 응회질셰일 등이다. 광체는 2.4-4 m 두께로 안산암질응회암에 배태되는데, 주향과 경사는 각각 $N70^{\circ}E-N85^{\circ}E$, $16^{\circ}NW-32^{\circ}NW$이다. 모암변질대는 propylitic, advanced argillic 변질대로 구분되며, 이들은 각기 고유한 광물조합과 화학조성을 가진다. propylitic 변질대는 albite-epidote-chlorite-quartz가 특징이며, advanced argillic 변질대는 pyrophyllite-deckite-alunite-diaspore가 특징적인 광물조합을 이룬다. propylitic 변질대의 경우 알루미나와 실리카는 뚜렷한 관계를 보여주지 않는다. 그러나 advanced argillic 변질대의 경우 알루미나와 실리카는 역비례 관계를 가진다. pyrophyllite는 advanced argillic 변질대에서 가장 풍부하며 dickite, diaspore, alunite와 밀접히 수반되어 산출하는데, 이는 저온성인 2M다형으로 산출된다. dickite는 Hinckley 지수가 0.83으로 중간 정도의 결정도를 보인다. alunite는 K를 치환하는 Na가 53.2-71.6 몰퍼센트를 보인다. 그리고 R자리의 양이온의 함량이 커질수록 보다 많은 Na가 M자리에 들어간다. diaspore는 용해조직을 보이는데 여기서 pyrophyllite가 흔히 생성된다. 사장석은 Ca가 빠져 나감으로 해서 알바이트화작용을 겪었다. sulfide와 sulfate의 분해작용으로 인하여 열수용액의 pH가 저하되었으며 이로 인하여 Si의 용탈이 우세하게 일어났다. 점토광상의 형성에 필요한 알루미나의 주 공급원으로는 화산암류의 사장석으로부터 공급되는 알루미나와 안산암질응회암에 박층으로 혼재하는 응회질셰일로부터 공급되는 알루미나를 들 수 있다. propylitic 변질대에서 advanced argillic 변질대로 갈수록 pH의 감소가 일어났다. 보고된 실험자료와 광물조합을 통하여 추정한 광상의 생성온도는 $270-320^{\circ}C$ 범위이다.

  • PDF

국가민속문화재 일월수 다라니 주머니 금속 장식지의 과학적 분석 (A Scientific Analysis of Decorative Metal Foil Used in Pouch for the Sutra Embroidered with a Sun and Moon Design Designated as National Folklore Cultural Heritage)

  • 박성희;박세린;서정훈;박종서;이량미
    • 보존과학회지
    • /
    • 제38권2호
    • /
    • pp.124-132
    • /
    • 2022
  • 본 연구는 국가민속문화재 일월수 다라니 주머니 매듭과 테두리 장식에 사용된 '금속 장식지'를 대상으로 과학적 분석을 통해 재료적 특성을 파악하였다. 금속 장식지는 SEM-EDS 분석을 통해 은(Ag) 및 황(S)이 확인되어 은제 금속박을 배지에 부착하여 제작한 것으로 추정할 수 있다. 황(S)은 농도와 접촉시간에 따라 은(Ag)을 황색부터 흑색까지 변색시킬 수 있다. 현재는 황색을 확인할 수 없으나, 은(Ag)으로 가금사를 만든 사례가 있어 본래 색을 추정하기 위해서는 추가 연구가 필요하다. 배지는 배면까지 적갈색이다. 함께 검출된 알루미늄(Al)과 규소(Si), 철(Fe)은 전통 편금사(片金絲)의 붉은색 접착제로 추정되는 주토(朱土)의 주성분으로, 금속 장식지의 접착제 관련 성분으로 추측된다. GC/MS 분석 결과에서 접착제 성분은 아교(阿膠)로 확인할 수 있었다.

백운 폐광산의 방치된 폐석으로 인한 주변 수계의 환경적 영향 (Environmental effects from Natural Waters Contaminated with Acid Mine Drainage in the Abandoned Backun Mine Area)

  • 전서령;정재일;김대현
    • 자원환경지질
    • /
    • 제35권4호
    • /
    • pp.325-337
    • /
    • 2002
  • 백운 폐광산 주변에 방치된 폐석으로 인한 하천수 및 하상퇴적물의 중금속오염정도를 알아보고자 하였다. 광산활동과 관련되어 발생하는 주변 하천수의 Al 및 Pb, Zn, Cu, Cd, Mn, Fe 등의 중금속 및 기타 이온의 부화현상은 하천수의 TDS를 높이며 또한, 수질을 악화시키는 요인이 된다. 백운광산 주변의 하천수는 Ca와 SO$_4$가 주를 이루는 Ca-SO$_4$형을 보이며, 부분적으로 황화광물의 화학적 풍화로 인한 중금속부화현상을 보인다. 광산을 경유해서 흐르는 하천수는 알카리 및 알카리 토류원소에 의한 중화작용의 영향으로 pH는 6.S-7.1의 약산성내지 중성을 띤다 폐갱구로부터 홀러나오는 갱내수 또한 약산성 내지 중성을 띠며, 광산내의 광석과 맥석광물과의 화학적 풍화로 인해 높은 원소함량을 보인다. 백운 폐광산 주변의 하천수는 갱내수가 유입되는 지역에서 높은 농도를 보이다 하류로 갈수록 농도가 급격히 낮아진다. 이온농도가 낮아지고 pH가 중성을 띠는 것은 자연적으로 오염을 조정해주는 희석 및 침전, 흡착 등으로 인한 완충작용의 결과이다. 토양내에서 중금속의 이동성이나 생물학적 이용능력을 알아보기 위하여 단계별 추출법을 이용하여 하상퇴적물에서 Cd, Cu, Zn, Pb의 존재형태를 5가지 단계로 분류하였다: 이온교환형태, 탄산염형태, 철-망간 산화물형태, 유기물형태, 잔류상형태. 대부분의 퇴적물에서 Cu(21-92%) 및 Zn(28-89%), Pb(23-94%)는 잔류상형태가 우세하였으며, Cd는 퇴적물에서 다른 원소에 비해 낮은 농도(2.7-52.8 mg/kg)를 보여주었으나 대부분 불안정한 형태(68-97%)가 우세하였다. 상류 퇴적물에서는 폐석으로 인해 Pb의 농도가 높게 나타나며, 하류 퇴적물은 Zn이 높은 농도를 보여, Zn 과 불안정한 형태가 우세한 Cd이 이동성이 높은 원소임을 알 수 있었다.thing construction. The presentation coverages and relative difficulties of textbooks were, however, diverse. It is somewhat noticeable that, while fewer professors majoring in clothing construction participated in writing, generally more pages were allocated to clothing construction than other areas. While presentations on anthropometrics method, construction theory, draft theory, usage of sewing machine and fitting theory were insufficient most textbooks were dealing with drafting of basic slopers and sewing procedure, etc. Making-up techniques on the apparels items such as Korean traditional men's pants, pajamas, shirt vest skirt, pants, apron and Korean pouch were handled closely in each textbook.different from the one in the l980s worn by the demonstrators of popular movements and democratic movements, and it emerged as a new symbol with the characteristics of cultural movement like community consciousness and nature affiliation.