• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.493-501
• /
• 2012

A rotational force generator for molten metal is developed using a linear motor design technology. Also, the developed device is applied to reproduce aluminum scraps and easy to control the rotate, stop, and forward and reverse rotation of molten metal. In addition, the developed device improves the melting speed and reproduction rate about 250 (%) and 96-99 (%), respectively, compared to the conventional handmade methods. Because it generates almost no dusts, it can improve working environments in a factory. Also, it has no losses in energy because it directly melts scraps. The device generates small amounts of the loss in refractory materials and aluminum caused by its oxidation because the molten metal is continuously rotated in which the loss and oxidized aluminum are the problems in the conventional melting and holding furnaces. Thus, it is possible to extend the life of furnaces and to produce high quality aluminum products.

• Journal of Korea Foundry Society
• /
• v.25 no.5
• /
• pp.203-208
• /
• 2005

The main emphasis of this study is to optimize the process variables for manufacturing aluminum foam materials by direct foaming of remelted aluminum scraps. Aluminum foams were fabricated from two different raw materials, pure aluminum and used beverage cans. For both cases, $TiH_{2}$ was used as a foaming agent. Calcium was added as a thickener for the foaming of pure aluminum and no thickener was added for that of used beverage Cans because the pre-existing oxides of the used beverage cans are used as a thickener. Calcium and $TiH_{2}$ content varies from 0.5wt.% to 2.0wt.% and from 0.5wt.% to 1.5wt.%, respectively. The processing conditions, such as the effect of calcium on the melt viscosity, foaming temperature, and the optimum amount of the foaming agent with regard to the melt viscosity were discussed.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.50-55
• /
• 2000

Recycling technology of aluminum foil scraps into aluminum flake powder by ball milling in dry or wet conditions was studied. Aluminum foil were laminated each other, elongated through microforging by the falling balls, fragmented into small foils and then changed into flake powder during ball milling. It is also possible to recycle foil scraps with thickness less than $60\mu\textrm{m}$ into aluminum paste by wet ball milling. As initial foil thickness decreases, foil is easily milled to flake powder by wet milling in mineral spirits. the appearance and the opaque character of glass painted with aluminum paste obtained by wet milling of foils are similar to those of aluminum paste made by ball milling of gas atomized powder.

• Resources Recycling
• /
• v.24 no.5
• /
• pp.72-79
• /
• 2015

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of all the non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium in this article. Domestic demand and production of these non-ferrous metals in recent years (2010-2014) and recycling ratio of the scraps are estimated briefly here.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.52-57
• /
• 2009

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, lead, zinc, aluminum, nickel and magnesium in this article. Domestic demand and production in recent years and current status on the recycling of the scraps of these non-ferrous metals are introduced briefly here.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.81-86
• /
• 2013

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of all the non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium in this article. Domestic demand and production of these non-ferrous metals in recent years(2010-2012) and recycling ratio of the scraps are estimated briefly here.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.68-76
• /
• 2019

It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Institute of Resources Recycling since ten years before. However, it was confined to six major non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium because there are so many kind of non-ferrous metals. In this article also, demand and supply of these non-ferrous metals in addition tin during recent five years (2014 ~ 2018) in Korean markets were reviewed, and their recycling ratio of scraps were briefly estimated. The statistical data were mainly cited from the data issued by Korea Customs Service (KCS) and Korea Non-Ferrous Metal Association, and some fragmental published review articles from magazines and other technical reports.

• 연구논문집
• /
• s.29
• /
• pp.131-139
• /
• 1999

The effect of ball milling conditions in the milling of aluminium foil scraps was studied. Initial foil thickness, ball size. content of oleic acid. weight ratio of mineral spirits/foil. charged amount of foil were varied in wet ball milling process. It is impossible to make flake powders by milling of foil scraps with thickness $120 \mum$. As foil thickness decreases from $60\mum$ to $6.5\mum$, Mean size of powder milled for 30 h decreases from 107 µm to 17 µm. Bigger ball is slightly beneficial for milling of foils to the flake powders due to the larger impact energy produced by them. It is impossible to mill the foil without oleic acid to fabricate the flake powder. As content of oleic acid increases from 1.5 % to 5 %, mean size of flake powder milled for 30 h is drastically decreased. For the mineral spirits content below 50 %, foil scrap was not milled because sliding motion of balls by lubricant effect between balls and wall of container. As weight ratio of mineral spirits and foil increase over 100 %, foils were milled powders with mean powder size 15 - 20 때 irrespective of mineral spirits content due to reduced lubricant effect. As charged amount of foil decreases, mean powder size decreases due to increased collision frequency between ball and foil.

• Electrical & Electronic Materials
• /
• v.9 no.8
• /
• pp.806-812
• /
• 1996

I-V characteristics of ground electrode fabricated using an aluminium scrap are presented. We fabricated several shapes of aluminium scraps and aluminium electrodes. The results show that the current of aluminium electrode increased linearly by the voltage increase. AC breakdown voltage of copper plate electrode was higher than that of aluminium electrode. AC breakdown current of aluminium electrode was higher than that of copper plate electrode. As applied voltage increased, grounding resistance of aluminum electrode decreased linearly.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.196-200
• /
• 2004