• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.49-57
• /
• 2002

The effect of mechanical parameters on chemical mechanical polishing (CMP) of blanket and patterned aluminum thin films are investigated. CMP process experiments are conducted using the soft pad and the slurry mainly composed of acid solution and A1$_2$O$_3$ abrasive. The result for the blanket film showed that as the concentration of abrasive in slurry is increased, the surface roughness gets worse but the waviness gets better. The planarity of the patterned Al films is slowly improved by CMP when the width of and gap between the patterns are relatively small. It is tried to find the optimized CMP process conditions by that the patterned Al thin film can be planarized with fine surface. The most satisfiable film surface is obtained when the applied pressure is low (10kPa) and the abrasive concentration is relatively high (5wt%).

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.68-75
• /
• 2000

This paper presents the construction of an ultra-precision machining system and machining experiments using the developed system. The system is composed of air bearing system, granite bed, air pad, and linear feeding mechanism. The cutting conditions have great effect on the surface quality in ultra-precision machining. the ultra-precision machining is mainly processed by several ${\mu}{\textrm}{m}$ depth of cut and feed rate. For this, tools with sharper cutting edge and less tool wear are needed. To satisfy these requirement, diamond is generally used as a tool material for ultra-precision machining. In order to evaluate the cutting characteristics of the PCD and MCD tools on the aluminum alloy, the machining experiments performed using the developed system.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.531-537
• /
• 2012

Fretting fatigue tests were conducted to investigate the effect of contact pressure on fretting fatigue behavior in aluminum alloy A7075-T6. Test results showed that when the contact pressure is so low that gross or partial slip occurs at the pad/specimen interface, fretting fatigue damage increases with the contact pressure. However, when the contact pressure is high enough to prevent slip at the interface, fretting fatigue damage decreases with the contact pressure. In order to understand how the contact pressure influence the fretting fatigue damage, finite element analyses were conducted and the analysis results were used to evaluate critical plane fretting fatigue damage parameters and their components. It is revealed that fretting fatigue damage estimated with the parameters exhibits the same variation as that in the tests. Moreover, the variation of fretting fatigue damage is closely related with that of the maximum normal stress on the critical plane rather than the strain amplitude on the critical plane.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.797-801
• /
• 2003

The mechanical properties such as shear strength and the hardness of milli-size products that manufactured for various process parameters by forward extrusion using square dies are investigated. Shear strength test is implemented for the observation of relation between vickers hardness and shear strength in the interface of head and shaft part of a stepped pin. When the extrusion ratios of pure aluminum and pure copper billets increase, the hardness on both the surface and the center line of a pin also increase, especially the hardness on the surface is shown to be a little higher than on the center. The existence of knock-out pad in extrusion die caused hardness increase in the interface of a extruded pin. As compared shear strength with hardness of a pin, the approximated linear relations are suggested in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.646-650
• /
• 1996

In this paper, A hydrostatic bearing spindle for high precision machining and a motor built-in spindle for high speed machining are developed toobtain the high precision machining accuracy of the prototype lathe. The sliding bearing with fluoric resin (turcite) pad is adopted for improving the damping charateristics of guide ways. The funning accuracy of moving elements isestimated to confirm the validity of application on the prototype; the high precision CNC lathe. The surface roughness of Cupper and Aluminum machined by the hydrostatic spindle are 0.07 .mu. m and 0.10 .mu. mRmax. The surface roughness of Aluminium machined by the built-in spindle are 0.10 .mu. mRmax. From this results, it is venified that the prototype lathe is effective to high precision maching.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.31-38
• /
• 2001

This paper deals with the micro turning property of setting angle using diamond tool. The bed of the system has used the granite which has the thermal and vibrational characteristics superior to the cast iron bed for the common machine tool. To minimize the inner and outer vibration of the fuming system, an air pad system was manufactured and tested. The aero-static spindle system which has the excellent rotation accuracy was designed and manufactured. As a result of the micro-cutting test on aluminum alloy, tool setting angel have effected on surface roughness. From the results, the micro-cutting conditions hope to provide the useful actual data using in industrial fields.

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.31-36
• /
• 2018

본 연구에서는 DRAM 소자의 Pressure Cooker Test (PCT) 신뢰성 평가 후 발생한 불량 원인에 대한 연구를 진행하였다. 불량 시료의 물리적 관측 결과 변색, Al의 부식 및 손실, 그리고 금속 간 중간 절연막 박리 등이 관측되었다. 추가 물리적 화학적 분석 결과 비정상적인 물질인 $Al_XO_Y$ 층을 발견하였다. 불량 원인을 파악 하기 위해 package ball 크기 실험 및 보호막 pin hole 등의 연관성 실험을 진행하였으나 원인으로 판명되지 않았다. 또한 EMC 물질에 포함되어 있는 Cl에 의한 Al 할로겐화 평가를 진행하였다. 진행 결과 약간의 개선 효과를 보였지만 완벽한 문제 해결을 이루어 내지 못했다. Galvanic corrosion 가능성 가설을 세웠고, 면밀한 분석 결과 pad open 지역에서 Ti 잔존물을 발견할 수 있었다. 검증 실험으로 repair 식각 분리 실험을 진행하여 개선 효과를 보았다. 개선 된 조건에서 PCT 신뢰성 기준치를 만족 하는 결과를 얻었다. 금번 PCT 불량 메카니즘은 다음과 같이 설명할 수 있다. 공정 repair etch시 Ti 잔류물이 남아 Galvanic 메커니즘에 의해 Al이 이온화 된다. 이온화 된 Al이 후속 PCT 신뢰성 측정 시 $H_2O$와 반응하여 비 정상 물질인 $Al_XO_Y$를 생성하였다.

• 복식
• /
• 제56권3호
• /
• pp.73-80
• /
• 2006

This study is aimed to produce natural dyeing garments, which contain the sentiments and color sense of Koreans, by using various household supplies, with a view to increase the values added and utilization of natural dyeing. The dyes mainly used for this study are multi-colored ones which are durable after dyeing and can represent various colors. They include Lithodpermum officinale, Caesalpinia sappan, Rubia Cordifolia, Pellodendron Bak, Curcuma Longa L., fallen Ginkgo Biloba, Artemisia Princeps, and Quereus acutissima carr shell. Considering water pollution and other things, aluminum acetate and ferrous chloride were used as mordants. Cheap and practical materials such as cotton cloth and those with traditional patterns and elegance such as silk and ramie fabrics were used to produce baby goods, household supplies, clothes, and accessories. The produced supplies closely contact with our body, so they may have a great effect on human body. The household supplies produced include rug, bedclothes, room bedclothes, curtain, bedding set, cushion, and sunlight blind, in consideration of the functionality or medical actions of the goods which are closely related to the human skin. The infant supplies produced include longcloth for newborn baby, bedding set, gauze handkerchief, and doll. The clothes include night gown, shirt, bath gown, and Korean traditional clothes. The accessories include tablecloth, cup pad, bag, wrapping cloth, mouse and keyboard cushion, and scarf. Nowadays, consumers prefer environment-friendly naturally dyed garments and products. In order to control the naturally dyed garments and products which are traded in the domestic market, it is urgent to introduce such ecological marks as 'Toxproof' and 'Ecoproof.' Currently, many ordinary persons, who are not experts, have interest and participate in natural dyeing, but they simply produce naturally dyed garments, not artistic works or everyday supplies. The present author expects this study will contribute to the production of household goods by such persons. The author also hopes that they will develop and commercialize such designs as suit to modern tastes and senses based on the unique cultural assets of Koreans, so that Korean naturally dyed products may be recognized as reliable commodities equipped with international competitiveness.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.267-275
• /
• 2001

Friction and wear properties of brake friction materials containing different metal fibers (Al, Cu or Steel fibers) were investigated. Based on a simple experimental formulation, friction materials with the same amount of metal fibers were tested using a pad-on-disk type friction tester. Two different materials (gray cast iron and aluminum metal matrix composite (MMC)) were used for disks rubbing against the friction materials. Results front ambient temperature tests revealed that the friction material containing Cu fibers sliding against gray cast iron disk showed a distinct negative $\mu$-v (friction coefficient vs. sliding velocity) relation implying possible stick-slip generation at low speeds. The negative $\mu$- v relation was not observed when the Cu-containing friction materials were rubbed against the Al-MMC counter surface. Elevated temperature tests showed that the friction level and the intensity of friction force oscillation were strongly affected by the thermal conductivity and melting temperature of metallic ingredients of the friction couple. Friction materials slid against cast iron disks exhibited higher friction coefficients than Al-MMC (metal matrix composite) disks during high temperature tests. On the other hand, high temperature test results suggested that copper fibers in the friction material improved fade resistance and that steel fibers were not compatible with Al-MMC disks showing severe material transfer and erratic friction behavior during sliding at elevated temperatures.

• Fisheries and Aquatic Sciences
• /
• 제26권1호
• /
• pp.24-34
• /
• 2023

Reactive oxygen species (ROS) at high concentrations induce oxidative stress, an imbalanced redox state that is a prevalent cause of neurodegenerative disorders. This study aimed to investigate the protective effect of Capsosiphon fulvescens (CF) extract on oxidative stress-induced impairment of cognitive function in models of neurodegenerative diseases. CF was extracted with subcritical water and several solvents and H₂O₂ (0.25 mM) or aluminum chloride (AlCl₃; 25 µM) as an inducer of ROS was treated in PC12 neuronal cells and zebrafish larvae. All statistical analyses were performed using one-way analysis of variance and Dunnett's test using GraphPad Prism. H₂O₂ and AlCl₃ were found to significantly induce ROS production in PC12 neuronal cells and zebrafish larvae. In addition, they strongly affected intracellular Ca²⁺ levels, antioxidant enzyme activity, brain-derived neurotrophic factor (BDNF) and tropomyosin receptor kinase B (TrkB) signaling, acetylcholinesterase (AChE) activity, and hallmarks of Alzheimer's disease. However, treatment of H₂O₂-induced PC12 cells or AlCl₃-induced zebrafish larvae with CF subcritical water extract at 90℃ and CF water extract effectively regulated excessive ROS production, intracellular Ca²⁺ levels, and mRNA expression of superoxide dismutase, glutathione peroxide, glycogen synthase kinase-3 beta, β-amyloid, tau, AChE, BDNF, and TrkB. Our study suggested that CF extracts can be a potential source of nutraceuticals that can improve the impairment of cognitive function and synaptic plasticity by regulating ROS generation in neurodegenerative diseases.