• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.731-739
• /
• 2014

투명 전도성 산화물로서 알루미늄과 붕소가 함께 도핑된 아연산화물(AZOB)이 $900^{\circ}C$에서 분무 열분해법에 의해 제조되었다. 얻어진 마이크론 크기의 AZOB 분말은 알루미늄, 붕소 및 아연의 수용액으로부터 얻어진다. 분무 열분해로 얻어진 마이크론 크기의 AZOB 분말은 $700^{\circ}C$에서 두 시간동안의 후 소성 과정과 24 시간 동안의 볼 밀링을 통해 나노 크기의 AZOB으로 변환된다. AZOB을 구성하는 일차 입자의 크기를 Debye-Scherrer 식에 의해 계산하였고 압축된 AZOB 펠렛의 표면 저항을 측정하였다.

• 대한치과기공학회지
• /
• 제43권1호
• /
• pp.6-12
• /
• 2021

Purpose: This study aimed to compare the shear bond strength between zirconia cores and veneer ceramics as per the sand blasting and liner treatments. Methods: The following 4 groups of zirconia-veneering ceramic specimens were prepared: (1) Group I, untreated; (2) Group II, with 110 ㎛ aluminium oxide (Al2O3) sandblasting; (3) Group III, with liner (IPS e.max ZirLiner; Ivoclar Vivadent); and (4) Group IV, with 110 ㎛ Al2O3 sand blasting and liner. Surface roughness was measured for all the prepared specimens, and the surface morphology was observed using a scanning electron microscope. All the samples (n=40) were fixed with measuring jigs, and shear bond strengths were obtained using a universal testing machine with a crosshead speed of 0.5 mm/min. The shear bond strength data were analyzed using one-way analysis of variance and t-test. The post hoc comparison was performed using the Tukey's test (α=0.05). Results: A significant difference in the surface roughness was observed between the specimens of groups I and II (p<0.05). Surface treatment with liner and sandblasting showed higher shear bond strength between zirconia core and veneering ceramic (p<0.05). Conclusion: The sand blasting and liner treatment increased the shear bond strength between zirconia core and veneering ceramic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1260-1261
• /
• 2008

Aluminium doped zinc oxide (ZnO:Al) thin film has emerged as one of the most promising transparent conducting electrode in flat panel displays(FPD) and in photovoltaic devices since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r.f. magnetron sputtering method. Wide ranges of bias voltage, -30V${\sim}$45V, was applied to the growing films as an additional energy instead of substrate heating, and the effect of positive and negative bias on the film structure and electrical properties of ZnO:Al films was studied and discussed. The results showed that a bias applied to the substrate during sputtering contributed to the improvement of electrical properties of the film by attracting ions and electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO film on the substrate, resulting in significant variations in film structure and electrical properties. The film deposited on the PET substrate at r. f. discharge power of 200 W showed the minimum resistivity of about $2.4{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 87%.

• 한국분말재료학회지
• /
• 제30권5호
• /
• pp.424-430
• /
• 2023

YAG phosphor powders were fabricated by the atmospheric plasma spraying method with the spray-dried spherical YAG precursor. The YAG precursor slurry for the spray drying process was prepared by the PVA solution chemical processing utilizing a domestic easy-sintered aluminum oxide (Al₂O₃) powder as a seed. The homogenous and viscous slurry resulted in dense granules, not hollow or porous particles. The synthesized phosphor powders demonstrated a stable YAG phase, and excellent fluorescence properties of approximately 115% compared with commercial YAG:Ce³⁺ powder. The microstructure of the phosphor powder had a perfect spherical shape and an average particle size of approx imately 30 ㎛. As a result of the PKG test of the YAG phosphor powder, the synthesized phosphor powders exhibited an outstanding luminous intensity, and a peak wavelength was observed at 531 nm.

• 한국재료학회지
• /
• 제10권5호
• /
• pp.375-381
• /
• 2000

전해콘텐서용 알루미늄박을 ammonium adipate 용액을 이용하여 $65^{\circ}C$에서 10분간 100V 및 140V로 각각 양극 산화시켜 산화 알루미늄 유전체를 만들었다. 유전층의 두께, 화학양론적 관계, 결정구조 등을 RBS 및 TEM을 이용하여 분석하였고, 알루미늄박의 에칭시 황산 첨가로 인한 표면적의 변화는 임피던스 분석법으로 조사 하였다. 생성된 유전피막은 100V 및 140V의 전압을 사용했을 경우 각각 약 130nm 및 190nm 두께의 비정질로 나타났으며 피막의 알루미늄과 산소원소의 화학양자론적 비는 약 2:3의 비율로 존재했다. 또한 유전피막은 전자빔은 조사에 의해 쉽게 $${\gamma}$-Al_2$$O_3$ 형태의 결정질로 변태 되었다. 염산 에칭욕에 황산 첨가시 나타나는 알루미늄박의 표면변화는 임피던스 분석결과와 정전 용략의 변화가 일치하는 경향을 나타냈다.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.599-610
• /
• 2005

Purpose: The success of the bonding between electroformed gold and ceramic is dependent on the surface treatment of the pure gold coping. The purpose of this study was to evaluate the bonding strength between the electroformed gold and ceramic with varying surface treatment. Materials and methods: A total of 32 disks,8 were using conventional ceramometal alloy, 24 were using electroforming technique as recommended by manufacturer, were prepared. 24 electroformed disks were divided 3 groups according to surface treatment, i.e. 50 microns aluminium oxide sandblasting(GES-Sand), gold bonder treatment(GES-Bond) and $Rocatec^{TM}$ system(GES-Rocatec). For control group of conventional alloy 50 microns aluminium oxide treatment was done(V-Supragold). Energy dispersive x-ray analysis and scanning electron microscope image were observed. Using universal testing machine, shear bond strength and bonding failure mode at metal-porcelain interface were measured. Results and Conclusion: The following conclusions were drawn: 1. In the energy dispersive x-ray analysis, the Au was main component in electroformed gold(99.9wt%). After surface treatment, a little amount of $Al_2O_3(2.4wt%)$ were found in GES-Sand, and $SiO_2(4wt%)$ in GES-Bond. In GES-Rocatec, however, a large amount of $SiO_2(17.4wt%)$ were found. 2. In the scanning electron microscopy, similar pattern of surface irregu larities were observed in V-Supragold and GES-Sand. In GES-Bond, surface irregularities were increased and globular ceramic particles were observed. In GES-Rocatec, a large amount of silica particles attached to metal surface with increased surface irregularities were observed. 3. The mean shear bond strength values(MPa) in order were $22.9{\pm}3.7(V-Supragold),\;22.1{\pm}3.8(GES-Bond),\;20.1{\pm}2.8(GES-Rocatec)\;and\;13.0{\pm}1.4(GES-Sand)$. There was no significant difference between V-Supragold, GES-Bond, and GES-Rocatec. (P>0.05) 4. Most bonding failures modes were adhesive type in GES-Sand. However, in V-Supragold, GES-Bond and GES-Rocatec, cohesive and combination failures were commonly observed. From the result, with proper surface treatment method electroformed gold may have enough strength compare to conventional ceramometal alloy.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1186-1191
• /
• 2011

Composition which was used as a white smoke grenade consists of Aluminium(Al), Hexachloroethane(HCE) and Zinc Oxide(ZnO), etc. there is a possibility of misfire due to long term storage and there are very few reports on the mechanism behind misfire. In this study, an experimental method known as accelerated degradation testing is used to investigate the chemical mechanism resulting in misfire. The mechanism of chemical change during long term storage was analyzed with XRD and FT-IR. Analysis results suggest that a part of HCE consisting of the white smoke grenade disappeared and the other part was combined into $ZnCl_2$, $AlCl_3$, as a recycled intermediate product under closed system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.193-196
• /
• 1999

Organic electroluminescent devices have attracted a great deal of attention due to thier potential application to full-color flat-panel displays. The 8-hydroxyquinollne Zinc(Znq$_2$) were synthesized successfully from zinc chloride(ZnCl$_2$) and zinc acetate(Zn(C$_2$H$_3$O$_3$)$_2$) as green omitting material. A double-layer ELD consist of an emitting layer of B-hydroxyquinoline Zinc(Znq$_2$) and a hole-transport layer of tai-phenylene diamine(TPD) derivatives sandwiched between an Aluminium(Al) and Indium-Tin-Oxide(ITO) electrodes omitted green light resulting from Znq$_2$. The electroluminescent devices (ELD) exhibited a maximum luminance of 1000cd/$\textrm{cm}^2$ at a driving voltage of 8V and a driving current density of 0.4mA/$\textrm{cm}^2$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.374-374
• /
• 2012

Nowadays, Active Matrix Organic Light-Emitting Diodes (AM-OLEDs) are the superior display device due to their vivid full color, perfect video capability, light weight, low driving power, and potential flexibility. One of the advantages of AM-OLED over Liquid Crystal Display (LCD) lies in its flexibility. The potential flexibility of AM-OLED is not fully explored due to its sensitivity to moisture and oxygen which are readily present in atmosphere, and there are no flexible encapsulation layers available to protect these. Therefore, we come up with a new concept of Inorganic-Organic hybrid thin film as the encapsulation layer. Our Inorganic layer is Al2O3 and Organic layer is F-Alucone. We deposited these layers in vacuum state using Atomic Layer Deposition (ALD) and Molecular Layer Deposition (MLD) techniques. We found the results are comparable to commercial requirement of 10-6 g/m2 day for Water Vapor Transmission Rate (WVTR). Using ALD and MLD, we can control the exact thin film thickness and fabricate more dense films than chemical or physical vapor deposition methods. Moreover, this hybrid encapsulation layer potentially has both the flexibility of organic layers and superior protection properties of inorganic layer.

• 공업화학
• /
• 제10권2호
• /
• pp.304-309
• /
• 1999

한국산 벤토나이트에 0.2 M $AlCl_3{\cdot}6H_2O$ 수용액과 0.5 M NaOH 수용액을 혼합하여 제조한 수산화 알루미늄 올리고머를 층간 삽입시켜 다공성의 Al-pillared clay를 합성하여 특성 분석 및 열 안정성을 조사하였다. 합성한 aluminum-pillared clay는 수산화 알루미늄 올리고머의 OH/Al의 몰비가 0.25~2.25로 증가할수록 비표면적은 $104{\sim}228m^2/g$으로 증가하였고, 미세세공 면적과 미세세공 부피도 비표면적과 함께 증가하였다. 또한 BJH식으로 계산된 기공분포로부터 약 $40{\AA}$ 정도의 mesopore도 많이 생성되었음을 알 수 있었다. 이 결과는 수산화 알루미늄 올리고머가 층간 삽입되어 층간 공간을 확장하고 알루미늄 산화물이 층간에 지주가 되어 기공이 잘 발달하였기 때문인 것으로 생각된다. 또한 OH/Al 몰비가 클수록 층간기둥이 잘 발달되어 기공이 더욱 증가되었음을 알 수 있었다. OH/Al의 비가 큰 수산화 알루미늄 올리고머 용액으로 제조된 Al-pillared clay는 층간 지주들이 많이 생성되므로서 층간 기둥 밀도를 증가시켜 열안정성을 향상시킨 것으로 생각된다.